IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v263y2023ipds0360544222028468.html
   My bibliography  Save this article

Modeling results of a new high performance free liquid piston engine

Author

Listed:
  • Chouder, Ryma
  • Benabdesselam, Azzedine
  • Stouffs, Pascal

Abstract

Free piston engines, Ericsson hot air engines and liquid piston machines are concepts which, each independently, are considered highly relevant. These technologies have been associated to design a Free Liquid Piston Ericsson Engine (FLPEE). Both ends of a U-tube partly filled with water are equipped with valves. Air is the working fluid. One leg of the U-tube acts to compress the air, while the other arm allows the expansion of the compressed air previously heated by the hot source of the engine. This free liquid piston system is coupled with a micro-expander. A dynamic model of this engine is developed in the Matlab/Simulink computing environment, where simulations are performed in order to obtain suitable operation conditions and predict the performance of this machine. Cycle averaged simulations results provide an understanding of how operational parameters impact system performance. Intracycle simulation results based on a suitable operational data set highlight the instantaneous evolution of pressures, mass flow rates and forces acting on the liquid piston. For the chosen data set, the theoretical net mechanical power produced by the system is about 1.17 kW with a theoretical efficiency of 34% for a maximum pressure of 2.5 bar.

Suggested Citation

  • Chouder, Ryma & Benabdesselam, Azzedine & Stouffs, Pascal, 2023. "Modeling results of a new high performance free liquid piston engine," Energy, Elsevier, vol. 263(PD).
    • Handle: RePEc:eee:energy:v:263:y:2023:i:pd:s0360544222028468
    DOI: 10.1016/j.energy.2022.125960
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222028468
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.125960?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Li, Jian & Yang, Fubin & Zhang, Hongguang & Wu, Zhong & Tian, Yaming & Hou, Xiaochen & Xu, Yonghong & Ren, Jing, 2020. "Comparative analysis of different valve timing control methods for single-piston free piston expander-linear generator via an orthogonal experimental design," Energy, Elsevier, vol. 195(C).
    2. Wang, Yaodong & Chen, Lin & Jia, Boru & Roskilly, Anthony Paul, 2017. "Experimental study of the operation characteristics of an air-driven free-piston linear expander," Applied Energy, Elsevier, vol. 195(C), pages 93-99.
    3. Jokar, H. & Tavakolpour-Saleh, A.R., 2015. "A novel solar-powered active low temperature differential Stirling pump," Renewable Energy, Elsevier, vol. 81(C), pages 319-337.
    4. Motamedi, Mahmoud & Ahmadi, Rouhollah & Jokar, H., 2018. "A solar pressurizable liquid piston stirling engine: Part 1, mathematical modeling, simulation and validation," Energy, Elsevier, vol. 155(C), pages 796-814.
    5. Touré, Abdou & Stouffs, Pascal, 2014. "Modeling of the Ericsson engine," Energy, Elsevier, vol. 76(C), pages 445-452.
    6. Wang, Kai & Sanders, Seth R. & Dubey, Swapnil & Choo, Fook Hoong & Duan, Fei, 2016. "Stirling cycle engines for recovering low and moderate temperature heat: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 89-108.
    7. Wong, Y. W. & Sumathy, K., 1999. "Solar thermal water pumping systems: a review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 3(2-3), pages 185-217, June.
    8. Creyx, M. & Delacourt, E. & Morin, C. & Desmet, B. & Peultier, P., 2013. "Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle," Energy, Elsevier, vol. 49(C), pages 229-239.
    9. Gouda, El Mehdi & Benaouicha, Mustapha & Neu, Thibault & Fan, Yilin & Luo, Lingai, 2022. "Flow and heat transfer characteristics of air compression in a liquid piston for compressed air energy storage," Energy, Elsevier, vol. 254(PB).
    10. Markides, Christos N. & Osuolale, Adebayo & Solanki, Roochi & Stan, Guy-Bart V., 2013. "Nonlinear heat transfer processes in a two-phase thermofluidic oscillator," Applied Energy, Elsevier, vol. 104(C), pages 958-977.
    11. Zare, Shahryar & Tavakolpour-Saleh, A.R., 2020. "Predicting onset conditions of a free piston Stirling engine," Applied Energy, Elsevier, vol. 262(C).
    12. Yatsuzuka, Shinichi & Niiyama, Yasunori & Fukuda, Kentaro & Muramatsu, Kenshiro & Shikazono, Naoki, 2015. "Experimental and numerical evaluation of liquid-piston steam engine," Energy, Elsevier, vol. 87(C), pages 1-9.
    13. Martins, Matthieu & Mauran, Sylvain & Stitou, Driss & Neveu, Pierre, 2012. "A new thermal–hydraulic process for solar cooling," Energy, Elsevier, vol. 41(1), pages 104-112.
    14. Le Roux, W.G. & Bello-Ochende, T. & Meyer, J.P., 2013. "A review on the thermodynamic optimisation and modelling of the solar thermal Brayton cycle," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 677-690.
    15. Mahkamov, Khamid & Orda, Eugene & Belgasim, Basim & Makhkamova, Irina, 2015. "A novel small dynamic solar thermal desalination plant with a fluid piston converter," Applied Energy, Elsevier, vol. 156(C), pages 715-726.
    16. Ahmadi, Rouhollah & Jokar, H. & Motamedi, Mahmoud, 2018. "A solar pressurizable liquid piston stirling engine: Part 2, optimization and development," Energy, Elsevier, vol. 164(C), pages 1200-1215.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Yuan, Chenheng & Lu, Jiangchuan & Li, Shilei, 2023. "Thermoelectric coupling effect of secondary injection on gasoline fuel spray and mixing of a free vibration combustion alternator," Energy, Elsevier, vol. 281(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ngangué, Max Ndamé & Stouffs, Pascal, 2020. "Dynamic simulation of an original Joule cycle liquid pistons hot air Ericsson engine," Energy, Elsevier, vol. 190(C).
    2. Ahmadi, Rouhollah & Jokar, H. & Motamedi, Mahmoud, 2018. "A solar pressurizable liquid piston stirling engine: Part 2, optimization and development," Energy, Elsevier, vol. 164(C), pages 1200-1215.
    3. Motamedi, Mahmoud & Ahmadi, Rouhollah & Jokar, H., 2018. "A solar pressurizable liquid piston stirling engine: Part 1, mathematical modeling, simulation and validation," Energy, Elsevier, vol. 155(C), pages 796-814.
    4. Langdon-Arms, Samuel & Gschwendtner, Michael & Neumaier, Martin, 2018. "A novel solar-powered liquid piston Stirling refrigerator," Applied Energy, Elsevier, vol. 229(C), pages 603-613.
    5. Zare, Shahryar & Tavakolpour-saleh, A.R. & Aghahosseini, A. & Sangdani, M.H. & Mirshekari, Reza, 2021. "Design and optimization of Stirling engines using soft computing methods: A review," Applied Energy, Elsevier, vol. 283(C).
    6. Tan, Jingqi & Wei, Jianjian & Jin, Tao, 2020. "Electrical-analogy network model of a modified two-phase thermofluidic oscillator with regenerator for low-grade heat recovery," Applied Energy, Elsevier, vol. 262(C).
    7. Rui F. Costa & Brendan D. MacDonald, 2018. "Comparison of the Net Work Output between Stirling and Ericsson Cycles," Energies, MDPI, vol. 11(3), pages 1-16, March.
    8. Zare, Shahryar & Tavakolpour-Saleh, Alireza & Shourangiz-Haghighi, Alireza & Binazadeh, Tahereh, 2019. "Assessment of damping coefficients ranges in design of a free piston Stirling engine: Simulation and experiment," Energy, Elsevier, vol. 185(C), pages 633-643.
    9. Mohammed Wazed, Saeed & Hughes, Ben Richard & O’Connor, Dominic & Kaiser Calautit, John, 2018. "A review of sustainable solar irrigation systems for Sub-Saharan Africa," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 1206-1225.
    10. Aliaga, D.M. & Romero, C.P. & Feick, R. & Brooks, W.K. & Campbell, A.N., 2024. "Modelling, simulation, and optimisation of a novel liquid piston system for energy recovery," Applied Energy, Elsevier, vol. 357(C).
    11. Ngwaka, Ugochukwu & Wu, Dawei & Happian-Smith, Julian & Jia, Boru & Smallbone, Andrew & Diyoke, Chidiebere & Roskilly, Anthony Paul, 2021. "Parametric analysis of a semi-closed-loop linear joule engine generator using argon and oxy-hydrogen combustion," Energy, Elsevier, vol. 217(C).
    12. Zhuxian Liu & Zhong Wu & Yonghong Xu & Hongguang Zhang & Jian Zhang & Fubin Yang, 2022. "Performance Investigation of Single–Piston Free Piston Expander–Linear Generator with Multi–Parameter Based on Simulation Model," Energies, MDPI, vol. 15(23), pages 1-28, November.
    13. Wang, Kai & Sanders, Seth R. & Dubey, Swapnil & Choo, Fook Hoong & Duan, Fei, 2016. "Stirling cycle engines for recovering low and moderate temperature heat: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 89-108.
    14. Touré, Abdou & Stouffs, Pascal, 2014. "Modeling of the Ericsson engine," Energy, Elsevier, vol. 76(C), pages 445-452.
    15. Rahmati, A. & Varedi-Koulaei, S.M. & Ahmadi, M.H. & Ahmadi, H., 2022. "Dynamic synthesis of the alpha-type stirling engine based on reducing the output velocity fluctuations using Metaheuristic algorithms," Energy, Elsevier, vol. 238(PB).
    16. Ngwaka, Ugochukwu & Jia, Boru & Lawrence, Christopher & Wu, Dawei & Smallbone, Andrew & Roskilly, Anthony Paul, 2019. "The characteristics of a Linear Joule Engine Generator operating on a dry friction principle," Applied Energy, Elsevier, vol. 237(C), pages 49-59.
    17. Shokri Kalan, Ali & Heidarabadi, Shadab & Khaleghi, Mohammad & Ghiasirad, Hamed & Skorek-Osikowska, Anna, 2023. "Biomass-to-energy integrated trigeneration system using supercritical CO2 and modified Kalina cycles: Energy and exergy analysis," Energy, Elsevier, vol. 270(C).
    18. Semmari, Hamza & Mauran, Sylvain & Stitou, Driss, 2017. "Experimental validation of an analytical model of hydraulic motor operating under variable electrical loads and pressure heads," Applied Energy, Elsevier, vol. 206(C), pages 1309-1320.
    19. Yang, Rui & Wang, Junxiang & Luo, Ercang, 2023. "Revisiting the evaporative Stirling engine: The mechanism and a case study via thermoacoustic theory," Energy, Elsevier, vol. 273(C).
    20. Wu, Zhong & Zhang, Hongguang & Liu, Zhongliang & Tian, Guohong & Hou, Xiaochen & Yang, Fubin, 2022. "Force and energy analysis of single-piston free-piston expander—linear generator," Energy, Elsevier, vol. 251(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:263:y:2023:i:pd:s0360544222028468. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.