IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v164y2018icp642-654.html
   My bibliography  Save this article

Effects of dimethyl ether addition on soot formation, evolution and characteristics in flame-wall interactions

Author

Listed:
  • Luo, Minye
  • Liu, Dong

Abstract

In this study, the detailed effects of different levels of DME addition on soot formation, evolution and characteristics in flame-wall interactions are studied to improve the energy efficiency and develop soot reduction strategies. A quartz plate which is cooled by the circulating water is uprightly installed above the ethylene jet diffusion flames to generate the flame-wall interactions. The impinging flame propagates along the surface and a series of soot rings are formed. Soot particles from different regions which represent various combustion stages are sampled and analyzed. The nanostructure of soot is acquired by the high resolution transmission electron spectroscopy (HRTEM). The results of Raman spectroscopy reflect the soot graphitization degree and verify the HRTEM findings. The thermogravimetric analyzer (TGA) is adopted to evaluate the oxidation reactivity of soot particles. The results show that the flame impingement exhibits a significant impact on soot evolution and characteristics. The addition of DME performs well in suppressing soot formation and promoting energy efficiency. The addition of 20% DME suppresses the production of soot particles from post-impingement regions and promotes the oxidation reactivity. However, the promotion of soot formation and the reduction of oxidation reactivity are found in post-impingement regions with 5% DME addition.

Suggested Citation

  • Luo, Minye & Liu, Dong, 2018. "Effects of dimethyl ether addition on soot formation, evolution and characteristics in flame-wall interactions," Energy, Elsevier, vol. 164(C), pages 642-654.
    • Handle: RePEc:eee:energy:v:164:y:2018:i:c:p:642-654
    DOI: 10.1016/j.energy.2018.09.012
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544218317651
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2018.09.012?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhen, H.S. & Leung, C.W. & Cheung, C.S., 2011. "Emission of impinging swirling and non-swirling inverse diffusion flames," Applied Energy, Elsevier, vol. 88(5), pages 1629-1634, May.
    2. Liu, Hui & Wang, Zhi & Wang, Jianxin, 2014. "Methanol-gasoline DFSI (dual-fuel spark ignition) combustion with dual-injection for engine knock suppression," Energy, Elsevier, vol. 73(C), pages 686-693.
    3. Arnal, C. & Alzueta, M.U. & Millera, A. & Bilbao, R., 2012. "Influence of water vapor addition on soot oxidation at high temperature," Energy, Elsevier, vol. 43(1), pages 55-63.
    4. Sánchez, N.E. & Callejas, A. & Millera, A. & Bilbao, R. & Alzueta, M.U., 2012. "Formation of PAH and soot during acetylene pyrolysis at different gas residence times and reaction temperatures," Energy, Elsevier, vol. 43(1), pages 30-36.
    5. Bo Jiang & Pengfei Wang & Yaoyao Ying & Minye Luo & Dong Liu, 2018. "Nanoscale Characteristics and Reactivity of Nascent Soot from n -Heptane/2,5-Dimethylfuran Inverse Diffusion Flames with/without Magnetic Fields," Energies, MDPI, vol. 11(7), pages 1-21, July.
    6. Kang, Yinhu & Sun, Yuming & Lu, Xiaofeng & Gou, Xiaolong & Sun, Sicong & Yan, Jin & Song, Yangfan & Zhang, Pengyuan & Wang, Quanhai & Ji, Xuanyu, 2018. "Soot formation characteristics of ethylene premixed burner-stabilized stagnation flame with dimethyl ether addition," Energy, Elsevier, vol. 150(C), pages 709-721.
    7. Wang, Ying & Liu, Hong & Huang, Zhiyong & Liu, Zhensheng, 2016. "Study on combustion and emission of a dimethyl ether-diesel dual-fuel premixed charge compression ignition combustion engine with LPG (liquefied petroleum gas) as ignition inhibitor," Energy, Elsevier, vol. 96(C), pages 278-285.
    8. Ji, Changwei & Shi, Lei & Wang, Shuofeng & Cong, Xiaoyu & Su, Teng & Yu, Menghui, 2017. "Investigation on performance of a spark-ignition engine fueled with dimethyl ether and gasoline mixtures under idle and stoichiometric conditions," Energy, Elsevier, vol. 126(C), pages 335-342.
    9. Benajes, Jesús & Novella, Ricardo & García, Antonio & Arthozoul, Simon, 2011. "The role of in-cylinder gas density and oxygen concentration on late spray mixing and soot oxidation processes," Energy, Elsevier, vol. 36(3), pages 1599-1611.
    10. Yaoyao Ying & Chenxuan Xu & Dong Liu & Bo Jiang & Pengfei Wang & Wei Wang, 2017. "Nanostructure and Oxidation Reactivity of Nascent Soot Particles in Ethylene/Pentanol Flames," Energies, MDPI, vol. 10(1), pages 1-16, January.
    11. Kim, Kibum & Hahn, David W., 2016. "Interaction between iron based compound and soot particles in diffusion flame," Energy, Elsevier, vol. 116(P1), pages 933-941.
    12. Wang, Xiangang & Huang, Zuohua & Zhang, Wu & Kuti, Olawole Abiola & Nishida, Keiya, 2011. "Effects of ultra-high injection pressure and micro-hole nozzle on flame structure and soot formation of impinging diesel spray," Applied Energy, Elsevier, vol. 88(5), pages 1620-1628, May.
    13. Xuan, Tiemin & Cao, Jiawei & He, Zhixia & Wang, Qian & Zhong, Wenjun & Leng, Xianyin & Li, Da & Shang, Weiwei, 2018. "A study of soot quantification in diesel flame with hydrogenated catalytic biodiesel in a constant volume combustion chamber," Energy, Elsevier, vol. 145(C), pages 691-699.
    14. Dong, L.L. & Cheung, C.S. & Leung, C.W., 2013. "Heat transfer optimization of an impinging port-array inverse diffusion flame jet," Energy, Elsevier, vol. 49(C), pages 182-192.
    15. Park, Su Han & Yoon, Seung Hyun & Cha, Junepyo & Lee, Chang Sik, 2014. "Mixing effects of biogas and dimethyl ether (DME) on combustion and emission characteristics of DME fueled high-speed diesel engine," Energy, Elsevier, vol. 66(C), pages 413-422.
    16. Choi, Seungmok & Oh, Kwang-Chul & Lee, Chun-Bum, 2014. "The effects of filter porosity and flow conditions on soot deposition/oxidation and pressure drop in particulate filters," Energy, Elsevier, vol. 77(C), pages 327-337.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Duan, Jiaqi & Ying, Yaoyao & Liu, Dong, 2019. "Novel nanoscale control on soot formation by local CO2 micro-injection in ethylene inverse diffusion flames," Energy, Elsevier, vol. 179(C), pages 697-708.
    2. Wei, Zhilong & Zhen, Haisheng & Leung, Chunwah & Cheung, Chunshun & Huang, Zuohua, 2020. "Effects of unburned gases velocity on the CO/NO2/NOx formations and overall emissions of laminar premixed biogas-hydrogen impinging flame," Energy, Elsevier, vol. 196(C).
    3. Hu, Zhiyuan & Wang, Zizhou & Luo, Jun & Fu, Jiale & Tan, Piqiang & Lou, Diming, 2023. "Effect of transport distance on the size distribution, graphitized structure, surface functional groups and oxidation activity of PM from diesel engine: A comparison of waste cooking oil biodiesel and," Energy, Elsevier, vol. 282(C).
    4. Chen, Chen & Liu, Dong, 2023. "Review of effects of zero-carbon fuel ammonia addition on soot formation in combustion," Renewable and Sustainable Energy Reviews, Elsevier, vol. 185(C).
    5. Almanzalawy, M.S. & Elkady, M.F. & Mori, S. & Elwardany, A.E., 2023. "Quantification of soot nanostructure produced from a diesel engine fueled with C3 ketone," Energy, Elsevier, vol. 278(C).
    6. Li, Dun & Gao, Jianmin & Zhao, Ziqi & Du, Qian & Dong, Heming & Cui, Zhaoyang, 2022. "Effects of iron on coal pyrolysis-derived soot formation," Energy, Elsevier, vol. 249(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kang, Yinhu & Sun, Yuming & Lu, Xiaofeng & Gou, Xiaolong & Sun, Sicong & Yan, Jin & Song, Yangfan & Zhang, Pengyuan & Wang, Quanhai & Ji, Xuanyu, 2018. "Soot formation characteristics of ethylene premixed burner-stabilized stagnation flame with dimethyl ether addition," Energy, Elsevier, vol. 150(C), pages 709-721.
    2. Chu, Huaqiang & Han, Weiwei & Cao, Wenjian & Gu, Mingyan & Xu, Guangju, 2019. "Effect of methane addition to ethylene on the morphology and size distribution of soot in a laminar co-flow diffusion flame," Energy, Elsevier, vol. 166(C), pages 392-400.
    3. Pachiannan, Tamilselvan & Zhong, Wenjun & Rajkumar, Sundararajan & He, Zhixia & Leng, Xianying & Wang, Qian, 2019. "A literature review of fuel effects on performance and emission characteristics of low-temperature combustion strategies," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    4. Kang, Yinhu & Wang, Qiang & Zhang, Pengyuan & Liu, Congcong & Lu, Xiaofeng & Wang, Quanhai, 2020. "Study on flame structure and extinction mechanism of dimethyl ether spherical diffusion flames," Energy, Elsevier, vol. 193(C).
    5. Ji, Changwei & Shi, Lei & Wang, Shuofeng & Cong, Xiaoyu & Su, Teng & Yu, Menghui, 2017. "Investigation on performance of a spark-ignition engine fueled with dimethyl ether and gasoline mixtures under idle and stoichiometric conditions," Energy, Elsevier, vol. 126(C), pages 335-342.
    6. Wei, Zhilong & Zhen, Haisheng & Leung, Chunwah & Cheung, Chunshun & Huang, Zuohua, 2020. "Effects of unburned gases velocity on the CO/NO2/NOx formations and overall emissions of laminar premixed biogas-hydrogen impinging flame," Energy, Elsevier, vol. 196(C).
    7. Shi, Lei & Ji, Changwei & Wang, Shuofeng & Su, Teng & Cong, Xiaoyu & Wang, Du & Tang, Chuanqi, 2019. "Effects of second injection timing on combustion characteristics of the spark ignition direct injection gasoline engines with dimethyl ether enrichment in the intake port," Energy, Elsevier, vol. 180(C), pages 10-18.
    8. Huang, Yuhan & Surawski, Nic C. & Zhuang, Yuan & Zhou, John L. & Hong, Guang, 2021. "Dual injection: An effective and efficient technology to use renewable fuels in spark ignition engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    9. Kang, Yinhu & Wei, Shuang & Zhang, Pengyuan & Lu, Xiaofeng & Wang, Quanhai & Gou, Xiaolong & Huang, Xiaomei & Peng, Shini & Yang, Dong & Ji, Xuanyu, 2017. "Detailed multi-dimensional study on NOx formation and destruction mechanisms in dimethyl ether/air diffusion flame under the moderate or intense low-oxygen dilution (MILD) condition," Energy, Elsevier, vol. 119(C), pages 1195-1211.
    10. Huang, Haozhong & Liu, Qingsheng & Teng, Wenwen & Pan, Mingzhang & Liu, Chang & Wang, Qingxin, 2018. "Improvement of combustion performance and emissions in diesel engines by fueling n-butanol/diesel/PODE3–4 mixtures," Applied Energy, Elsevier, vol. 227(C), pages 38-48.
    11. Wang, Zhi & Liu, Hui & Long, Yan & Wang, Jianxin & He, Xin, 2015. "Comparative study on alcohols–gasoline and gasoline–alcohols dual-fuel spark ignition (DFSI) combustion for high load extension and high fuel efficiency," Energy, Elsevier, vol. 82(C), pages 395-405.
    12. Wang, Qiang & Tang, Fei & Zhou, Zheng & Liu, Huan & Palacios, Adriana, 2017. "Flame height of axisymmetric gaseous fuel jets restricted by parallel sidewalls: Experiments and theoretical analysis," Applied Energy, Elsevier, vol. 208(C), pages 1519-1526.
    13. Zhao, Rui & Liu, Dong, 2022. "Temperature dependence of chemical effects of ethanol and dimethyl ether mixing on benzene and PAHs formation in ethylene counter-flow diffusion flames," Energy, Elsevier, vol. 257(C).
    14. Li, Dun & Gao, Jianmin & Zhao, Ziqi & Du, Qian & Dong, Heming & Cui, Zhaoyang, 2022. "Effects of iron on coal pyrolysis-derived soot formation," Energy, Elsevier, vol. 249(C).
    15. Huang, Weidi & Wu, Zhijun & Gao, Ya & Zhang, Lin, 2015. "Effect of shock waves on the evolution of high-pressure fuel jets," Applied Energy, Elsevier, vol. 159(C), pages 442-448.
    16. Kozarac, Darko & Taritas, Ivan & Vuilleumier, David & Saxena, Samveg & Dibble, Robert W., 2016. "Experimental and numerical analysis of the performance and exhaust gas emissions of a biogas/n-heptane fueled HCCI engine," Energy, Elsevier, vol. 115(P1), pages 180-193.
    17. Xuan, Tiemin & Sun, Zhongcheng & EL-Seesy, Ahmed I. & Mi, Yonggang & Zhong, Wenjun & He, Zhixia & Wang, Qian & Sun, Jianbing & El-Batsh, Hesham M. & Cao, Jiawei, 2021. "An optical study on spray and combustion characteristics of ternary hydrogenated catalytic biodiesel/methanol/n-octanol blends; part П: Liquid length and in-flame soot," Energy, Elsevier, vol. 227(C).
    18. He, Qing & Guo, Qinghua & Umeki, Kentaro & Ding, Lu & Wang, Fuchen & Yu, Guangsuo, 2021. "Soot formation during biomass gasification: A critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    19. Shen, Bo & Su, Yan & Yu, Hao & Zhang, Yulin & Lang, Maochun & Yang, He, 2023. "Experimental study on the effect of injection strategies on the combustion and emissions characteristic of gasoline/methanol dual-fuel turbocharged engine under high load," Energy, Elsevier, vol. 282(C).
    20. Duan, Jiaqi & Ying, Yaoyao & Liu, Dong, 2019. "Novel nanoscale control on soot formation by local CO2 micro-injection in ethylene inverse diffusion flames," Energy, Elsevier, vol. 179(C), pages 697-708.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:164:y:2018:i:c:p:642-654. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.