IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v90y2012i1p94-99.html
   My bibliography  Save this article

Characteristics of Ni–Nb-based metallic amorphous alloys for hydrogen-related energy applications

Author

Listed:
  • Jayalakshmi, S.
  • Vasantha, V.S.
  • Fleury, E.
  • Gupta, M.

Abstract

In hydrogen-related energy technologies, materials selection is critical as hydrogen tends to decrease the mechanical stability of the metallic alloys. Amorphous alloys are known to exhibit high hydrogen solubility and significant embrittlement resistance. The current work is focussed towards the properties of several (Ni–Nb)-based amorphous alloys for use in hydrogen-related energy applications. Based on the studies pertaining to hydrogenation characteristics and mechanical stability, it was observed that the Ni–Nb-based amorphous alloys have high absorption capacity, with hydrogen-to-metal ratio (H/M)∼1.8 (∼2.30wt.% of hydrogen) and excellent embrittlement resistance (H/M∼0.8), due to their unconventional structure and high hydrogen solubility, but these properties are strongly dependent on the alloy compositions. Investigations carried out to study the hydrogen permeation behavior of various Ni–Nb base amorphous alloys under gas permeation conditions for application as permeation membranes indicated that the Ni–Nb-based amorphous alloys exhibit high hydrogen permeabilities (∼1.1×10−8molm−1s−1MPa−1/2), comparable to that of Pd–Cu, in the temperature range 300–550°C. The corrosion behavior of the Ni–Nb alloys investigated under simulated proton-exchange membrane fuel cells (PEMFC) conditions, for use as bipolar plates in PEMFC exhibited excellent corrosion resistance, with corrosion and passivation current densities nearly comparable to those of graphite, the currently used material for bipolar plates. From these studies, it was understood that the inherent structure of the alloys and the constituent alloying elements played an important role in determining the properties. Based on our investigations, and from the hydrogen storage properties of amorphous alloys existing from literature, it is envisioned that amorphous alloys are most promising as future-generation materials for hydrogen-related energy applications.

Suggested Citation

  • Jayalakshmi, S. & Vasantha, V.S. & Fleury, E. & Gupta, M., 2012. "Characteristics of Ni–Nb-based metallic amorphous alloys for hydrogen-related energy applications," Applied Energy, Elsevier, vol. 90(1), pages 94-99.
  • Handle: RePEc:eee:appene:v:90:y:2012:i:1:p:94-99
    DOI: 10.1016/j.apenergy.2011.01.040
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261911000584
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.apenergy.2011.01.040?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Principi, G. & Agresti, F. & Maddalena, A. & Lo Russo, S., 2009. "The problem of solid state hydrogen storage," Energy, Elsevier, vol. 34(12), pages 2087-2091.
    2. H. W. Sheng & W. K. Luo & F. M. Alamgir & J. M. Bai & E. Ma, 2006. "Atomic packing and short-to-medium-range order in metallic glasses," Nature, Nature, vol. 439(7075), pages 419-425, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ortiz-Vitoriano, N. & Bernuy-López, C. & Ruiz de Larramendi, I. & Knibbe, R. & Thydén, K. & Hauch, A. & Holtappels, P. & Rojo, T., 2013. "Optimizing solid oxide fuel cell cathode processing route for intermediate temperature operation," Applied Energy, Elsevier, vol. 104(C), pages 984-991.
    2. Kou, Huaqin & Huang, Zhiyong & Luo, Wenhua & Sang, Ge & Meng, Daqiao & Luo, Deli & Zhang, Guanghui & Chen, Hao & Zhou, Ying & Hu, Changwen, 2015. "Experimental study on full-scale ZrCo and depleted uranium beds applied for fast recovery and delivery of hydrogen isotopes," Applied Energy, Elsevier, vol. 145(C), pages 27-35.
    3. Chung, C.A. & Yang, Su-Wen & Yang, Chien-Yuh & Hsu, Che-Weu & Chiu, Pai-Yuh, 2013. "Experimental study on the hydrogen charge and discharge rates of metal hydride tanks using heat pipes to enhance heat transfer," Applied Energy, Elsevier, vol. 103(C), pages 581-587.
    4. Kim, Sung Han & Miesse, Craig M. & Lee, Hee Bum & Chang, Ik Whang & Hwang, Yong Sheen & Jang, Jae Hyuk & Cha, Suk Won, 2014. "Ultra compact direct hydrogen fuel cell prototype using a metal hydride hydrogen storage tank for a mobile phone," Applied Energy, Elsevier, vol. 134(C), pages 382-391.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Chung, Kyong-Hwan, 2010. "High-pressure hydrogen storage on microporous zeolites with varying pore properties," Energy, Elsevier, vol. 35(5), pages 2235-2241.
    2. Yao Zhang & Zezhou Li & Xing Tong & Zhiheng Xie & Siwei Huang & Yue-E Zhang & Hai-Bo Ke & Wei-Hua Wang & Jihan Zhou, 2024. "Three-dimensional atomic insights into the metal-oxide interface in Zr-ZrO2 nanoparticles," Nature Communications, Nature, vol. 15(1), pages 1-10, December.
    3. Yang, Weijuan & Zhang, Tianyou & Liu, Jianzhong & Wang, Zhihua & Zhou, Junhu & Cen, Kefa, 2015. "Experimental researches on hydrogen generation by aluminum with adding lithium at high temperature," Energy, Elsevier, vol. 93(P1), pages 451-457.
    4. Kalamse, Vijayanand & Wadnerkar, Nitin & Chaudhari, Ajay, 2013. "Multi-functionalized naphthalene complexes for hydrogen storage," Energy, Elsevier, vol. 49(C), pages 469-474.
    5. Wang, Feng & Li, Rongfeng & Ding, Cuiping & Tang, Wukui & Wang, Yibo & Xu, Shimeng & Yu, Ronghai & Wang, Zhongmin, 2017. "Enhanced hydrogen storage properties of ZrCo alloy decorated with flower-like Pd particles," Energy, Elsevier, vol. 139(C), pages 8-17.
    6. El-Eskandarany, M. Sherif & Al-Matrouk, H. & Shaban, Ehab & Al-Duweesh, Ahmed, 2015. "Superior catalytic effect of nanocrystalline big-cube Zr2Ni metastable phase for improving the hydrogen sorption/desorption kinetics and cyclability of MgH2 powders," Energy, Elsevier, vol. 91(C), pages 274-282.
    7. Chinnappan, Amutha & Kang, Hyuck-Chul & Kim, Hern, 2011. "Preparation of PVDF nanofiber composites for hydrogen generation from sodium borohydride," Energy, Elsevier, vol. 36(2), pages 755-759.
    8. Ismail, M., 2015. "Effect of LaCl3 addition on the hydrogen storage properties of MgH2," Energy, Elsevier, vol. 79(C), pages 177-182.
    9. Thomas J. Hardin & Michael Chandross & Rahul Meena & Spencer Fajardo & Dimitris Giovanis & Ioannis Kevrekidis & Michael L. Falk & Michael D. Shields, 2024. "Revealing the hidden structure of disordered materials by parameterizing their local structural manifold," Nature Communications, Nature, vol. 15(1), pages 1-11, December.
    10. Ding, Xiangqian & Zhu, Yunfeng & Wei, Lingjun & Li, Ying & Li, Liquan, 2013. "Synergistic hydrogen desorption of HCS MgH2 + LiAlH4 composite," Energy, Elsevier, vol. 55(C), pages 933-938.
    11. Macanás, Jorge & Soler, Lluís & Candela, Angélica María & Muñoz, Maria & Casado, Juan, 2011. "Hydrogen generation by aluminum corrosion in aqueous alkaline solutions of inorganic promoters: The AlHidrox process," Energy, Elsevier, vol. 36(5), pages 2493-2501.
    12. Zhang, Wei & Cheng, Ying & Han, Da & Han, Shumin, 2015. "The hydrogen storage properties of MgH2–Fe3S4 composites," Energy, Elsevier, vol. 93(P1), pages 625-630.
    13. Jing Wang & Ping Jiang & Fuping Yuan & Xiaolei Wu, 2022. "Chemical medium-range order in a medium-entropy alloy," Nature Communications, Nature, vol. 13(1), pages 1-6, December.
    14. Pedicini, R. & Schiavo, B. & Rispoli, P. & Saccà, A. & Carbone, A. & Gatto, I. & Passalacqua, E., 2014. "Progress in polymeric material for hydrogen storage application in middle conditions," Energy, Elsevier, vol. 64(C), pages 607-614.
    15. Kou, Huaqin & Luo, Wenhua & Huang, Zhiyong & Sang, Ge & Meng, Daqiao & Zhang, Guanghui & Chen, Changan & Luo, Deli & Hu, Changwen, 2015. "Fabrication and experimental validation of a full-scale depleted uranium bed with thin double-layered annulus configuration for hydrogen isotopes recovery and delivery," Energy, Elsevier, vol. 90(P1), pages 588-594.
    16. Wang, Yanhong & Yin, Kaidong & Fan, Shuanshi & Lang, Xuemei & Yu, Chi & Wang, Shenglong & Li, Song, 2021. "The molecular insight into the “Zeolite-ice” as hydrogen storage material," Energy, Elsevier, vol. 217(C).
    17. Gkanas, Evangelos I. & Khzouz, Martin & Panagakos, Grigorios & Statheros, Thomas & Mihalakakou, Giouli & Siasos, Gerasimos I. & Skodras, Georgios & Makridis, Sofoklis S., 2018. "Hydrogenation behavior in rectangular metal hydride tanks under effective heat management processes for green building applications," Energy, Elsevier, vol. 142(C), pages 518-530.
    18. Fan, Mei-Qiang & Liu, Shu-sheng & Zhang, Yao & Zhang, Jian & Sun, Li-Xian & Xu, Fen, 2010. "Superior hydrogen storage properties of MgH2–10 wt.% TiC composite," Energy, Elsevier, vol. 35(8), pages 3417-3421.
    19. Meryem Sena Akkus, 2022. "Investigation of Hydrogen Production Performance Using Nanoporous NiCr and NiV Alloys in KBH 4 Hydrolysis," Energies, MDPI, vol. 15(24), pages 1-15, December.
    20. Weng, Baicheng & Wu, Zhu & Li, Zhilin & Yang, Hui, 2012. "Hydrogen generation from hydrolysis of MNH2BH3 and NH3BH3/MH (M=Li, Na) for fuel cells based unmanned submarine vehicles application," Energy, Elsevier, vol. 38(1), pages 205-211.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:90:y:2012:i:1:p:94-99. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.