IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v349y2023ics0306261923009972.html
   My bibliography  Save this article

Computational models of effective thermal conductivity for periodic porous media for all volume fractions and conductivity ratios

Author

Listed:
  • Li, Ziwei
  • Yang, Yi
  • Gariboldi, Elisabetta
  • Li, Yanwen

Abstract

The effective thermal conductivity (ETC) of composites is of great significance for simulating the macroscopic heat transfer process. In this paper, an extension of the morphology efficiency is proposed, which quantifies the influence of morphology on composite ETC, and is initially derived from two extreme models-series and parallel ETC bounds. The morphology efficiency obtained from different bound models are compared. It concluded that the morphology efficiency derived from Hashin and Shtrikman bound models is the best representative of the morphology of isotropic composite materials, which can conveniently reveal the optimal volume fraction of inclusion phase and thermal conductivity of the ideal thermal response. For composites with inverse Simple Cubic, Body Centered Cubic, Face-Centered Cubic and Kelvin lattice, the corresponding prediction model of ETC is proposed in a wide range of porosity and thermal conductivity. Among them, the ETC model of Kelvin cell and inverse Simple Cubic cell can well predict the high porosity foam and foams filled with phases with thermal conductivity ratio r in the range of 3 to 8, respectively.

Suggested Citation

  • Li, Ziwei & Yang, Yi & Gariboldi, Elisabetta & Li, Yanwen, 2023. "Computational models of effective thermal conductivity for periodic porous media for all volume fractions and conductivity ratios," Applied Energy, Elsevier, vol. 349(C).
    • Handle: RePEc:eee:appene:v:349:y:2023:i:c:s0306261923009972
    DOI: 10.1016/j.apenergy.2023.121633
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261923009972
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2023.121633?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhang, Shengqi & Pu, Liang & Mancin, Simone & Ma, Zhenjun & Xu, Lingling, 2022. "Experimental study on heat transfer characteristics of metal foam/paraffin composite PCMs in large cavities: Effects of material types and heating configurations," Applied Energy, Elsevier, vol. 325(C).
    2. Zhang, Long & Zhou, Kechao & Wei, Quiping & Ma, Li & Ye, Wentao & Li, Haichao & Zhou, Bo & Yu, Zhiming & Lin, Cheng-Te & Luo, Jingting & Gan, Xueping, 2019. "Thermal conductivity enhancement of phase change materials with 3D porous diamond foam for thermal energy storage," Applied Energy, Elsevier, vol. 233, pages 208-219.
    3. Hu, Haitao & Zhao, Yaxin & Li, Yuhan, 2023. "Research progress on flow and heat transfer characteristics of fluids in metal foams," Renewable and Sustainable Energy Reviews, Elsevier, vol. 171(C).
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Biwang Lu & Jing He, 2024. "Equivalent Thermal Conductivity of Topology-Optimized Composite Structure for Three Typical Conductive Heat Transfer Models," Energies, MDPI, vol. 17(11), pages 1-19, May.
    2. Yang, Mingshan & Li, Xiangyu & Chen, Weiqiu, 2024. "A robust lattice Boltzmann scheme for high-throughput predicting effective thermal conductivity of reinforced composites," Applied Energy, Elsevier, vol. 371(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Zhang, Yi & Tao, Wen & Wang, Kehan & Li, Dongxu, 2020. "Analysis of thermal properties of gypsum materials incorporated with microencapsulated phase change materials based on silica," Renewable Energy, Elsevier, vol. 149(C), pages 400-408.
    2. Jiang, Liang & Lei, Yuan & Liu, Qinfeng & Lei, Jingxin, 2020. "Polyethylene glycol based self-luminous phase change materials for both thermal and light energy storage," Energy, Elsevier, vol. 193(C).
    3. Diana Isabel Berrocal & Juan Blandon Rodriguez & Maria De Los Angeles Ortega Del Rosario & Itamar Harris & Arthur M. James Rivas, 2024. "Heat Transfer Enhancements Assessment in Hot Water Generation with Phase Change Materials (PCMs): A Review," Energies, MDPI, vol. 17(10), pages 1-35, May.
    4. Gharehghani, Ayat & Rabiei, Moeed & Mehranfar, Sadegh & Saeedipour, Soheil & Mahmoudzadeh Andwari, Amin & García, Antonio & Reche, Carlos Mico, 2024. "Progress in battery thermal management systems technologies for electric vehicles," Renewable and Sustainable Energy Reviews, Elsevier, vol. 202(C).
    5. Michał Musiał & Lech Lichołai & Dušan Katunský, 2023. "Modern Thermal Energy Storage Systems Dedicated to Autonomous Buildings," Energies, MDPI, vol. 16(11), pages 1-28, May.
    6. Yan, Xiaoxin & Feng, Yanhui & Qiu, Lin & Zhang, Xinxin, 2021. "Thermal conductivity and phase change characteristics of hierarchical porous diamond/erythritol composite phase change materials," Energy, Elsevier, vol. 233(C).
    7. Peng, Lihua & Chao, Luomeng & Xu, Ziqing & Yang, Haibin & Zheng, Dapeng & Wei, Boxuan & Sun, Changwei & Cui, Hongzhi, 2022. "High-efficiency energy-saving buildings utilizing potassium tungsten bronze heat-insulating glass and polyethylene glycol/expanded energy storage blanket," Energy, Elsevier, vol. 255(C).
    8. Shaoying Li & Zhongquan Qu & Zhiming Song, 2020. "A Multifunctional Combination Incubator," Energies, MDPI, vol. 13(24), pages 1-22, December.
    9. Wu, Shaofei & Yan, Ting & Kuai, Zihan & Pan, Weiguo, 2020. "Preparation and thermal property analysis of a novel phase change heat storage material," Renewable Energy, Elsevier, vol. 150(C), pages 1057-1065.
    10. Zhao, Liang & Xing, Yuming & Liu, Xin, 2020. "Experimental investigation on the thermal management performance of heat sink using low melting point alloy as phase change material," Renewable Energy, Elsevier, vol. 146(C), pages 1578-1587.
    11. Yao, Haichen & Liu, Xianglei & Luo, Qingyang & Xu, Qiao & Tian, Yang & Ren, Tianze & Zheng, Hangbin & Gao, Ke & Dang, Chunzhuo & Xuan, Yimin & Liu, Zhan & Yang, Xiaohu & Ding, Yulong, 2022. "Experimental and numerical investigations of solar charging performances of 3D porous skeleton based latent heat storage devices," Applied Energy, Elsevier, vol. 320(C).
    12. Li, Chuan & Li, Qi & Li, Yongliang & She, Xiaohui & Cao, Hui & Zhang, Peikun & Wang, Li & Ding, Yulong, 2019. "Heat transfer of composite phase change material modules containing a eutectic carbonate salt for medium and high temperature thermal energy storage applications," Applied Energy, Elsevier, vol. 238(C), pages 1074-1083.
    13. Chen, Renjie & Huang, Xinyu & Deng, Weibin & Zheng, Ruizhi & Aftab, Waseem & Shi, Jinmin & Xie, Delong & Zou, Ruqiang & Mei, Yi, 2020. "Facile preparation of flexible eicosane/SWCNTs phase change films via colloid aggregation for thermal energy storage," Applied Energy, Elsevier, vol. 260(C).
    14. Yafang Zhang & Jiebin Tang & Jialin Chen & Yuhai Zhang & Xiangxiang Chen & Meng Ding & Weijia Zhou & Xijin Xu & Hong Liu & Guobin Xue, 2023. "Accelerating the solar-thermal energy storage via inner-light supplying with optical waveguide," Nature Communications, Nature, vol. 14(1), pages 1-10, December.
    15. Michał Musiał & Lech Lichołai & Agnieszka Pękala, 2023. "Analysis of the Thermal Performance of Isothermal Composite Heat Accumulators Containing Organic Phase-Change Material," Energies, MDPI, vol. 16(3), pages 1-24, January.
    16. Bashiri Rezaie, Ali & Montazer, Majid, 2020. "Shape-stable thermo-responsive nano Fe3O4/fatty acids/PET composite phase-change material for thermal energy management and saving applications," Applied Energy, Elsevier, vol. 262(C).
    17. Liu, Yang & Zheng, Ruowei & Li, Ji, 2022. "High latent heat phase change materials (PCMs) with low melting temperature for thermal management and storage of electronic devices and power batteries: Critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    18. Zhao, Yanqi & Zou, Boyang & Zhang, Tongtong & Jiang, Zhu & Ding, Jianning & Ding, Yulong, 2022. "A comprehensive review of composite phase change material based thermal management system for lithium-ion batteries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    19. Yanjun Zhang & Shuli Liu & Liu Yang & Xiue Yang & Yongliang Shen & Xiaojing Han, 2020. "Experimental Study on the Strengthen Heat Transfer Performance of PCM by Active Stirring," Energies, MDPI, vol. 13(9), pages 1-16, May.
    20. Bashiri Rezaie, Ali & Montazer, Majid, 2019. "One-step preparation of magnetically responsive nano CuFe2O4/fatty acids/polyester composite for dynamic thermal energy management applications," Renewable Energy, Elsevier, vol. 143(C), pages 1839-1851.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:349:y:2023:i:c:s0306261923009972. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.