IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v255y2022ics0360544222014888.html
   My bibliography  Save this article

High-efficiency energy-saving buildings utilizing potassium tungsten bronze heat-insulating glass and polyethylene glycol/expanded energy storage blanket

Author

Listed:
  • Peng, Lihua
  • Chao, Luomeng
  • Xu, Ziqing
  • Yang, Haibin
  • Zheng, Dapeng
  • Wei, Boxuan
  • Sun, Changwei
  • Cui, Hongzhi

Abstract

The energy shortage crisis is one of the main challenges facing human society. Energy storage blanket (ESB) based on phase change material (PCM) and transparent heat-insulating glass (HIG) based on selective light-absorbing materials show great potential in regulating temperature and reducing building energy consumption. However, the stability of ESB and HIG is insufficient, and there is often a substantial indoor temperature difference when ESB and HIG are applied alone. In this research, stability-enhanced HIG and ESB were prepared. The oxidation and the decline in the heat insulation ability of HIG in air were solved by coating SiO2 film on the surface of KxWO3 nanoparticles. The low thermal conductivity and the deformation during the phase change process of ESB were solved by encapsulating PCM with expanded graphite. The combined use of HIG and ESB (HIG-ESB) reduces the temperature difference in the test room from 5.9 to 0.5 °C and the maximum indoor temperature from 50.5–56.4 °C to 28.5–28.9 °C. The energy-saving rates of ESB, HIG, and HIG-ESB in different climatic regions of China are evaluated by numerical simulation. The results show that ESB can save energy in all regions, while the HIG increases energy consumption in cold areas and can achieve a stronger energy-saving effect than ESB in mild areas such as Hong Kong and Changsha.

Suggested Citation

  • Peng, Lihua & Chao, Luomeng & Xu, Ziqing & Yang, Haibin & Zheng, Dapeng & Wei, Boxuan & Sun, Changwei & Cui, Hongzhi, 2022. "High-efficiency energy-saving buildings utilizing potassium tungsten bronze heat-insulating glass and polyethylene glycol/expanded energy storage blanket," Energy, Elsevier, vol. 255(C).
    • Handle: RePEc:eee:energy:v:255:y:2022:i:c:s0360544222014888
    DOI: 10.1016/j.energy.2022.124585
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222014888
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.124585?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mi, Xuming & Liu, Ran & Cui, Hongzhi & Memon, Shazim Ali & Xing, Feng & Lo, Yiu, 2016. "Energy and economic analysis of building integrated with PCM in different cities of China," Applied Energy, Elsevier, vol. 175(C), pages 324-336.
    2. Sadineni, Suresh B. & Madala, Srikanth & Boehm, Robert F., 2011. "Passive building energy savings: A review of building envelope components," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(8), pages 3617-3631.
    3. Cao, Lei & Tang, Yaojie & Fang, Guiyin, 2015. "Preparation and properties of shape-stabilized phase change materials based on fatty acid eutectics and cellulose composites for thermal energy storage," Energy, Elsevier, vol. 80(C), pages 98-103.
    4. Zhang, He & Xing, Feng & Cui, Hong-Zhi & Chen, Da-Zhu & Ouyang, Xing & Xu, Su-Zhen & Wang, Jia-Xin & Huang, Yi-Tian & Zuo, Jian-Dong & Tang, Jiao-Ning, 2016. "A novel phase-change cement composite for thermal energy storage: Fabrication, thermal and mechanical properties," Applied Energy, Elsevier, vol. 170(C), pages 130-139.
    5. Zhang, Long & Zhou, Kechao & Wei, Quiping & Ma, Li & Ye, Wentao & Li, Haichao & Zhou, Bo & Yu, Zhiming & Lin, Cheng-Te & Luo, Jingting & Gan, Xueping, 2019. "Thermal conductivity enhancement of phase change materials with 3D porous diamond foam for thermal energy storage," Applied Energy, Elsevier, vol. 233, pages 208-219.
    6. Memon, Shazim Ali & Cui, Hongzhi & Lo, Tommy Y. & Li, Qiusheng, 2015. "Development of structural–functional integrated concrete with macro-encapsulated PCM for thermal energy storage," Applied Energy, Elsevier, vol. 150(C), pages 245-257.
    7. Xu, Biwan & Li, Zongjin, 2014. "Performance of novel thermal energy storage engineered cementitious composites incorporating a paraffin/diatomite composite phase change material," Applied Energy, Elsevier, vol. 121(C), pages 114-122.
    8. Liang, Shuen & Li, Qianbiao & Zhu, Yalin & Chen, Keping & Tian, Chunrong & Wang, Jianhua & Bai, Ruke, 2015. "Nanoencapsulation of n-octadecane phase change material with silica shell through interfacial hydrolysis and polycondensation in miniemulsion," Energy, Elsevier, vol. 93(P2), pages 1684-1692.
    9. Miliozzi, Adio & Chieruzzi, Manila & Torre, Luigi, 2019. "Experimental investigation of a cementitious heat storage medium incorporating a solar salt/diatomite composite phase change material," Applied Energy, Elsevier, vol. 250(C), pages 1023-1035.
    10. Liu, Lingkun & Su, Di & Tang, Yaojie & Fang, Guiyin, 2016. "Thermal conductivity enhancement of phase change materials for thermal energy storage: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 62(C), pages 305-317.
    11. Karaipekli, Ali & Sarı, Ahmet & Kaygusuz, Kamil, 2007. "Thermal conductivity improvement of stearic acid using expanded graphite and carbon fiber for energy storage applications," Renewable Energy, Elsevier, vol. 32(13), pages 2201-2210.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Fan, Man & Hu, Ming & Suo, Hanxiao & Kong, Xiangfei & Li, Han & Jia, Jie, 2024. "Preferred method and performance evaluation of heterogeneous composite phase change material (CPCM) wallboard in different seasons," Renewable Energy, Elsevier, vol. 220(C).
    2. Xu, Huaqian & Zuo, Hongyang & Zeng, Kuo & Lu, Yongwen & Kong, Jiayue & Chi, Bowen & Gao, Junjie & Yang, Haiping & Chen, Hanping, 2023. "The heat transfer enhancement of the converging-diverging tube in the latent heat thermal energy storage unit: Melting performance and evaluation," Energy, Elsevier, vol. 282(C).
    3. Xu, Huaqian & Zuo, Hongyang & Zeng, Kuo & Lu, Yongwen & Chi, Bowen & Flamant, Gilles & Yang, Haiping & Chen, Hanping, 2024. "Investigation of the modified Gaussian-based non-phase field method for numerical simulation of latent heat storage," Energy, Elsevier, vol. 288(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Qian, Tingting & Li, Jinhong, 2018. "Octadecane/C-decorated diatomite composite phase change material with enhanced thermal conductivity as aggregate for developing structural–functional integrated cement for thermal energy storage," Energy, Elsevier, vol. 142(C), pages 234-249.
    2. Bashiri Rezaie, Ali & Montazer, Majid, 2019. "One-step preparation of magnetically responsive nano CuFe2O4/fatty acids/polyester composite for dynamic thermal energy management applications," Renewable Energy, Elsevier, vol. 143(C), pages 1839-1851.
    3. Yousefi, Ali & Tang, Waiching & Khavarian, Mehrnoush & Fang, Cheng, 2021. "Development of novel form-stable phase change material (PCM) composite using recycled expanded glass for thermal energy storage in cementitious composite," Renewable Energy, Elsevier, vol. 175(C), pages 14-28.
    4. Drissi, Sarra & Ling, Tung-Chai & Mo, Kim Hung & Eddhahak, Anissa, 2019. "A review of microencapsulated and composite phase change materials: Alteration of strength and thermal properties of cement-based materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 467-484.
    5. Xiong, Teng & Shah, Kwok Wei & Kua, Harn Wei, 2021. "Thermal performance enhancement of cementitious composite containing polystyrene/n-octadecane microcapsules: An experimental and numerical study," Renewable Energy, Elsevier, vol. 169(C), pages 335-357.
    6. Cui, Hongzhi & Tang, Waiching & Qin, Qinghua & Xing, Feng & Liao, Wenyu & Wen, Haibo, 2017. "Development of structural-functional integrated energy storage concrete with innovative macro-encapsulated PCM by hollow steel ball," Applied Energy, Elsevier, vol. 185(P1), pages 107-118.
    7. Palacios, Anabel & Cong, Lin & Navarro, M.E. & Ding, Yulong & Barreneche, Camila, 2019. "Thermal conductivity measurement techniques for characterizing thermal energy storage materials – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 108(C), pages 32-52.
    8. Li, Xiang & Wang, Yang & Wu, Shuang & Xie, Leidong, 2018. "Preparation and investigation of multicomponent alkali nitrate/nitrite salts for low temperature thermal energy storage," Energy, Elsevier, vol. 160(C), pages 1021-1029.
    9. Bashiri Rezaie, Ali & Montazer, Majid, 2020. "Shape-stable thermo-responsive nano Fe3O4/fatty acids/PET composite phase-change material for thermal energy management and saving applications," Applied Energy, Elsevier, vol. 262(C).
    10. Li, Chaoen & Yu, Hang & Song, Yuan & Liang, Hao & Yan, Xun, 2019. "Preparation and characterization of PMMA/TiO2 hybrid shell microencapsulated PCMs for thermal energy storage," Energy, Elsevier, vol. 167(C), pages 1031-1039.
    11. Ramakrishnan, Sayanthan & Sanjayan, Jay & Wang, Xiaoming & Alam, Morshed & Wilson, John, 2015. "A novel paraffin/expanded perlite composite phase change material for prevention of PCM leakage in cementitious composites," Applied Energy, Elsevier, vol. 157(C), pages 85-94.
    12. Liu, Jiang & Liu, Yan & Yang, Liu & Liu, Tang & Zhang, Chen & Dong, Hong, 2020. "Climatic and seasonal suitability of phase change materials coupled with night ventilation for office buildings in Western China," Renewable Energy, Elsevier, vol. 147(P1), pages 356-373.
    13. Saffari, Mohammad & de Gracia, Alvaro & Fernández, Cèsar & Cabeza, Luisa F., 2017. "Simulation-based optimization of PCM melting temperature to improve the energy performance in buildings," Applied Energy, Elsevier, vol. 202(C), pages 420-434.
    14. Ye, Rongda & Lin, Wenzhu & Yuan, Kunjie & Fang, Xiaoming & Zhang, Zhengguo, 2017. "Experimental and numerical investigations on the thermal performance of building plane containing CaCl2·6H2O/expanded graphite composite phase change material," Applied Energy, Elsevier, vol. 193(C), pages 325-335.
    15. Liu, Lingkun & Alva, Guruprasad & Huang, Xiang & Fang, Guiyin, 2016. "Preparation, heat transfer and flow properties of microencapsulated phase change materials for thermal energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 66(C), pages 399-414.
    16. Xiaoling Cui & Xiaoyun Du & Yanzhou Cao & Guochen Sang & Yangkai Zhang & Lei Zhang & Yiyun Zhu, 2020. "Thermophysical Properties Characterization of Sulphoaluminate Cement Mortars Incorporating Phase Change Material for Thermal Energy Storage," Energies, MDPI, vol. 13(19), pages 1-17, September.
    17. Mohammed, Abubakar Gambo & Elfeky, Karem Elsayed & Wang, Qiuwang, 2022. "Recent advancement and enhanced battery performance using phase change materials based hybrid battery thermal management for electric vehicles," Renewable and Sustainable Energy Reviews, Elsevier, vol. 154(C).
    18. Cai, Yibing & Wei, Qufu & Huang, Fenglin & Lin, Shiliang & Chen, Fang & Gao, Weidong, 2009. "Thermal stability, latent heat and flame retardant properties of the thermal energy storage phase change materials based on paraffin/high density polyethylene composites," Renewable Energy, Elsevier, vol. 34(10), pages 2117-2123.
    19. Zhang, Nan & Yuan, Yanping & Du, Yanxia & Cao, Xiaoling & Yuan, Yaguang, 2014. "Preparation and properties of palmitic-stearic acid eutectic mixture/expanded graphite composite as phase change material for energy storage," Energy, Elsevier, vol. 78(C), pages 950-956.
    20. Hu, Nan & Li, Zi-Rui & Xu, Zhe-Wen & Fan, Li-Wu, 2022. "Rapid charging for latent heat thermal energy storage: A state-of-the-art review of close-contact melting," Renewable and Sustainable Energy Reviews, Elsevier, vol. 155(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:255:y:2022:i:c:s0360544222014888. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.