IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v230y2018icp750-760.html
   My bibliography  Save this article

Process integration of thermal energy storage systems – Evaluation methodology and case studies

Author

Listed:
  • Gibb, Duncan
  • Johnson, Maike
  • Romaní, Joaquim
  • Gasia, Jaume
  • Cabeza, Luisa F.
  • Seitz, Antje

Abstract

As a key tool for decarbonization, thermal energy storage systems integrated into processes can address issues related to energy efficiency and process flexibility, improve utilization of renewable energy resources and thus reduce greenhouse gas emissions. However, integration of these systems is dominated by the variety of potential processes in which the storage technologies can be deployed as well as the various benefits they deliver. Therefore, the requirements for thermal energy storage systems vary greatly depending on the chosen application, just as the systems themselves have different capabilities depending on their technical principles. This paper addresses this issue by developing a systematic methodology that approaches the challenge of characterizing and evaluating thermal energy storage systems in different applications in three concrete steps. To begin, a set of guidelines for process analysis has been created to disclose process requirements for storage integration. The methodology continues by explicitly defining the system boundary of a thermal energy storage system, as well as addressing technical and economic parameters. Finally, the approach concludes by determining the benefit of an integrated thermal energy storage system to an application and examines how key performance indicators vary based on the perspectives of different stakeholders. Within this work, the methodology is then applied to two case studies of high-temperature storage in concentrating solar power and cogeneration plants. Also introduced are the concepts of retrofit and greenfield applications, which are used to clarify differences between integrated storage systems. The paper shows how such a systematic approach can be used to consistently analyse processes for storage integration, facilitate comparison between thermal energy storage systems integrated into processes across applications and finally grasp how different interests perceive the benefits of the integrated storage system. This type of systematic methodology for technology integration has not been previously developed and as such, is a novel and important contribution to the thermal energy storage community. In the long term, this work builds the basis for a discussion on benefits of thermal energy storage system integration with diverse stakeholders including storage system designers, process owners and policy makers.

Suggested Citation

  • Gibb, Duncan & Johnson, Maike & Romaní, Joaquim & Gasia, Jaume & Cabeza, Luisa F. & Seitz, Antje, 2018. "Process integration of thermal energy storage systems – Evaluation methodology and case studies," Applied Energy, Elsevier, vol. 230(C), pages 750-760.
    • Handle: RePEc:eee:appene:v:230:y:2018:i:c:p:750-760
    DOI: 10.1016/j.apenergy.2018.09.001
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261918313023
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2018.09.001?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Personal, Enrique & Guerrero, Juan Ignacio & Garcia, Antonio & Peña, Manuel & Leon, Carlos, 2014. "Key performance indicators: A useful tool to assess Smart Grid goals," Energy, Elsevier, vol. 76(C), pages 976-988.
    2. Cassettari, Lucia & Bendato, Ilaria & Mosca, Marco & Mosca, Roberto, 2017. "Energy Resources Intelligent Management using on line real-time simulation: A decision support tool for sustainable manufacturing," Applied Energy, Elsevier, vol. 190(C), pages 841-851.
    3. Miró, Laia & Brückner, Sarah & Cabeza, Luisa F., 2015. "Mapping and discussing Industrial Waste Heat (IWH) potentials for different countries," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 847-855.
    4. Cabeza, Luisa F. & Galindo, Esther & Prieto, Cristina & Barreneche, Camila & Inés Fernández, A., 2015. "Key performance indicators in thermal energy storage: Survey and assessment," Renewable Energy, Elsevier, vol. 83(C), pages 820-827.
    5. Wallerand, Anna S. & Kermani, Maziar & Kantor, Ivan & Maréchal, François, 2018. "Optimal heat pump integration in industrial processes," Applied Energy, Elsevier, vol. 219(C), pages 68-92.
    6. Tanaka, Kanako, 2008. "Assessment of energy efficiency performance measures in industry and their application for policy," Energy Policy, Elsevier, vol. 36(8), pages 2877-2892, August.
    7. Zhang, Chuan & Zhou, Li & Chhabra, Pulkit & Garud, Sushant S. & Aditya, Kevin & Romagnoli, Alessandro & Comodi, Gabriele & Dal Magro, Fabio & Meneghetti, Antonella & Kraft, Markus, 2016. "A novel methodology for the design of waste heat recovery network in eco-industrial park using techno-economic analysis and multi-objective optimization," Applied Energy, Elsevier, vol. 184(C), pages 88-102.
    8. Matino, Ismael & Colla, Valentina & Baragiola, Stefano, 2017. "Quantification of energy and environmental impacts in uncommon electric steelmaking scenarios to improve process sustainability," Applied Energy, Elsevier, vol. 207(C), pages 543-552.
    9. May, Gökan & Barletta, Ilaria & Stahl, Bojan & Taisch, Marco, 2015. "Energy management in production: A novel method to develop key performance indicators for improving energy efficiency," Applied Energy, Elsevier, vol. 149(C), pages 46-61.
    10. Kylili, Angeliki & Fokaides, Paris A. & Lopez Jimenez, Petra Amparo, 2016. "Key Performance Indicators (KPIs) approach in buildings renovation for the sustainability of the built environment: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 906-915.
    11. Kapila, Sahil & Oni, Abayomi Olufemi & Kumar, Amit, 2017. "The development of techno-economic models for large-scale energy storage systems," Energy, Elsevier, vol. 140(P1), pages 656-672.
    12. Vilanova, Mateus Ricardo Nogueira & Magalhães Filho, Paulo & Balestieri, José Antônio Perrella, 2015. "Performance measurement and indicators for water supply management: Review and international cases," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 1-12.
    13. Yan, Yi & Zhang, Chenghui & Li, Ke & Wang, Zhen, 2018. "An integrated design for hybrid combined cooling, heating and power system with compressed air energy storage," Applied Energy, Elsevier, vol. 210(C), pages 1151-1166.
    14. Giacone, E. & Mancò, S., 2012. "Energy efficiency measurement in industrial processes," Energy, Elsevier, vol. 38(1), pages 331-345.
    15. Stinner, Sebastian & Huchtemann, Kristian & Müller, Dirk, 2016. "Quantifying the operational flexibility of building energy systems with thermal energy storages," Applied Energy, Elsevier, vol. 181(C), pages 140-154.
    16. Drouineau, Mathilde & Maïzi, Nadia & Mazauric, Vincent, 2014. "Impacts of intermittent sources on the quality of power supply: The key role of reliability indicators," Applied Energy, Elsevier, vol. 116(C), pages 333-343.
    17. Wang, Jiangjiang & Xie, Xinqi & Lu, Yanchao & Liu, Boxiang & Li, Xiaojing, 2018. "Thermodynamic performance analysis and comparison of a combined cooling heating and power system integrated with two types of thermal energy storage," Applied Energy, Elsevier, vol. 219(C), pages 114-122.
    18. Xu, Pengpeng & Chan, Edwin Hon-Wan & Qian, Queena Kun, 2011. "Success factors of energy performance contracting (EPC) for sustainable building energy efficiency retrofit (BEER) of hotel buildings in China," Energy Policy, Elsevier, vol. 39(11), pages 7389-7398.
    19. Pelay, Ugo & Luo, Lingai & Fan, Yilin & Stitou, Driss & Rood, Mark, 2017. "Thermal energy storage systems for concentrated solar power plants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 82-100.
    20. Welsch, Bastian & Göllner-Völker, Laura & Schulte, Daniel O. & Bär, Kristian & Sass, Ingo & Schebek, Liselotte, 2018. "Environmental and economic assessment of borehole thermal energy storage in district heating systems," Applied Energy, Elsevier, vol. 216(C), pages 73-90.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Navalho, Jorge E.P. & Pereira, José C.F., 2020. "A comprehensive and fully predictive discrete methodology for volumetric solar receivers: application to a functional parabolic dish solar collector system," Applied Energy, Elsevier, vol. 267(C).
    2. Miliozzi, Adio & Chieruzzi, Manila & Torre, Luigi, 2019. "Experimental investigation of a cementitious heat storage medium incorporating a solar salt/diatomite composite phase change material," Applied Energy, Elsevier, vol. 250(C), pages 1023-1035.
    3. Chen, Cong & Sun, Hongbin & Shen, Xinwei & Guo, Ye & Guo, Qinglai & Xia, Tian, 2019. "Two-stage robust planning-operation co-optimization of energy hub considering precise energy storage economic model," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    4. Carbajo, Ruth & Cabeza, Luisa F., 2022. "Researchers’ perspective within responsible implementation with socio-technical approaches. An example from solar energy research centre in Chile," Renewable and Sustainable Energy Reviews, Elsevier, vol. 158(C).
    5. Saloux, E. & Candanedo, J.A., 2019. "Modelling stratified thermal energy storage tanks using an advanced flowrate distribution of the received flow," Applied Energy, Elsevier, vol. 241(C), pages 34-45.
    6. Vigneshwaran, K. & Sodhi, Gurpreet Singh & Muthukumar, P. & Guha, Anurag & Senthilmurugan, S., 2019. "Experimental and numerical investigations on high temperature cast steel based sensible heat storage system," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    7. Giordano, Nicolò & Raymond, Jasmin, 2019. "Alternative and sustainable heat production for drinking water needs in a subarctic climate (Nunavik, Canada): Borehole thermal energy storage to reduce fossil fuel dependency in off-grid communities," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    8. Wu, Min & Xu, Jiazhu & Zeng, Linjun & Li, Chang & Liu, Yuxing & Yi, Yuqin & Wen, Ming & Jiang, Zhuohan, 2022. "Two-stage robust optimization model for park integrated energy system based on dynamic programming," Applied Energy, Elsevier, vol. 308(C).
    9. Patricia Royo & Luis Acevedo & Álvaro J. Arnal & Maryori Diaz-Ramírez & Tatiana García-Armingol & Victor J. Ferreira & Germán Ferreira & Ana M. López-Sabirón, 2021. "Decision Support System of Innovative High-Temperature Latent Heat Storage for Waste Heat Recovery in the Energy-Intensive Industry," Energies, MDPI, vol. 14(2), pages 1-13, January.
    10. Sun, Xiaoqin & Jovanovic, Jovana & Zhang, Yuan & Fan, Siyuan & Chu, Youhong & Mo, Yajing & Liao, Shuguang, 2019. "Use of encapsulated phase change materials in lightweight building walls for annual thermal regulation," Energy, Elsevier, vol. 180(C), pages 858-872.
    11. Dusek, Sabrina & Hofmann, René & Gruber, Stephan, 2019. "Design analysis of a hybrid storage concept combining Ruths steam storage and latent thermal energy storage," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    12. Odenthal, Christian & Steinmann, Wolf-Dieter & Zunft, Stefan, 2020. "Analysis of a horizontal flow closed loop thermal energy storage system in pilot scale for high temperature applications – Part I: Experimental investigation of the plant," Applied Energy, Elsevier, vol. 263(C).
    13. Odenthal, Christian & Steinmann, Wolf-Dieter & Zunft, Stefan, 2020. "Analysis of a horizontal flow closed loop thermal energy storage system in pilot scale for high temperature applications – Part II: Numerical investigation," Applied Energy, Elsevier, vol. 263(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Romaní, Joaquim & Gasia, Jaume & Solé, Aran & Takasu, Hiroki & Kato, Yukitaka & Cabeza, Luisa F., 2019. "Evaluation of energy density as performance indicator for thermal energy storage at material and system levels," Applied Energy, Elsevier, vol. 235(C), pages 954-962.
    2. Sun, Jingchao & Na, Hongming & Yan, Tianyi & Che, Zichang & Qiu, Ziyang & Yuan, Yuxing & Li, Yingnan & Du, Tao & Song, Yanli & Fang, Xin, 2022. "Cost-benefit assessment of manufacturing system using comprehensive value flow analysis," Applied Energy, Elsevier, vol. 310(C).
    3. Vilanova, Mateus Ricardo Nogueira & Balestieri, José Antônio Perrella, 2015. "Modeling of hydraulic and energy efficiency indicators for water supply systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 48(C), pages 540-557.
    4. Anne Immonen & Maria Kopsakangas-Savolainen, 2022. "Capturing Consumers’ Awareness and the Intention to Support Carbon Neutrality through Energy Efficient Consumption," Energies, MDPI, vol. 15(11), pages 1-27, May.
    5. Pina, Eduardo A. & Lozano, Miguel A. & Ramos, José C. & Serra, Luis M., 2020. "Tackling thermal integration in the synthesis of polygeneration systems for buildings," Applied Energy, Elsevier, vol. 269(C).
    6. Walker, Shalika & Labeodan, Timilehin & Boxem, Gert & Maassen, Wim & Zeiler, Wim, 2018. "An assessment methodology of sustainable energy transition scenarios for realizing energy neutral neighborhoods," Applied Energy, Elsevier, vol. 228(C), pages 2346-2360.
    7. Fan, Jinyang & Liu, Wei & Jiang, Deyi & Chen, Junchao & Ngaha Tiedeu, William & Chen, Jie & JJK, Deaman, 2018. "Thermodynamic and applicability analysis of a hybrid CAES system using abandoned coal mine in China," Energy, Elsevier, vol. 157(C), pages 31-44.
    8. Alva, Guruprasad & Lin, Yaxue & Fang, Guiyin, 2018. "An overview of thermal energy storage systems," Energy, Elsevier, vol. 144(C), pages 341-378.
    9. Mao, Anjia & Yu, Tiantian & Ding, Zhaohao & Fang, Sidun & Guo, Jinran & Sheng, Qianqian, 2022. "Optimal scheduling for seaport integrated energy system considering flexible berth allocation," Applied Energy, Elsevier, vol. 308(C).
    10. Alessandro Franco & Lorenzo Miserocchi & Daniele Testi, 2023. "Energy Indicators for Enabling Energy Transition in Industry," Energies, MDPI, vol. 16(2), pages 1-18, January.
    11. Bhadbhade, Navdeep & Yilmaz, Selin & Zuberi, Jibran S. & Eichhammer, Wolfgang & Patel, Martin K., 2020. "The evolution of energy efficiency in Switzerland in the period 2000–2016," Energy, Elsevier, vol. 191(C).
    12. Wang, Jiangjiang & Lu, Zherui & Li, Meng & Lior, Noam & Li, Weihua, 2019. "Energy, exergy, exergoeconomic and environmental (4E) analysis of a distributed generation solar-assisted CCHP (combined cooling, heating and power) gas turbine system," Energy, Elsevier, vol. 175(C), pages 1246-1258.
    13. Li, Jun & Ng, S. Thomas & Skitmore, Martin, 2017. "Review of low-carbon refurbishment solutions for residential buildings with particular reference to multi-story buildings in Hong Kong," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 393-407.
    14. Panjapornpon, Chanin & Bardeeniz, Santi & Hussain, Mohamed Azlan, 2023. "Improving energy efficiency prediction under aberrant measurement using deep compensation networks: A case study of petrochemical process," Energy, Elsevier, vol. 263(PC).
    15. Lago, Jesus & De Ridder, Fjo & Mazairac, Wiet & De Schutter, Bart, 2019. "A 1-dimensional continuous and smooth model for thermally stratified storage tanks including mixing and buoyancy," Applied Energy, Elsevier, vol. 248(C), pages 640-655.
    16. Wang, Chaoyang & Zhao, Yongliang & Liu, Ming & Qiao, Yongqiang & Chong, Daotong & Yan, Junjie, 2018. "Peak shaving operational optimization of supercritical coal-fired power plants by revising control strategy for water-fuel ratio," Applied Energy, Elsevier, vol. 216(C), pages 212-223.
    17. Huang, Hongxu & Liang, Rui & Lv, Chaoxian & Lu, Mengtian & Gong, Dunwei & Yin, Shulin, 2021. "Two-stage robust stochastic scheduling for energy recovery in coal mine integrated energy system," Applied Energy, Elsevier, vol. 290(C).
    18. May, Gökan & Barletta, Ilaria & Stahl, Bojan & Taisch, Marco, 2015. "Energy management in production: A novel method to develop key performance indicators for improving energy efficiency," Applied Energy, Elsevier, vol. 149(C), pages 46-61.
    19. May, Gökan & Stahl, Bojan & Taisch, Marco, 2016. "Energy management in manufacturing: Toward eco-factories of the future – A focus group study," Applied Energy, Elsevier, vol. 164(C), pages 628-638.
    20. Jin Wu & Jiangjiang Wang & Jing Wu & Chaofan Ma, 2019. "Exergy and Exergoeconomic Analysis of a Combined Cooling, Heating, and Power System Based on Solar Thermal Biomass Gasification," Energies, MDPI, vol. 12(12), pages 1-19, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:230:y:2018:i:c:p:750-760. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.