IDEAS home Printed from https://ideas.repec.org/a/wly/greenh/v6y2016i2p232-250.html
   My bibliography  Save this article

Numerical optimization of a highly loaded compressor in semi‐closed cycles using neural networks and genetic algorithms

Author

Listed:
  • Bo Li
  • Chun‐wei Gu

Abstract

This paper outlines the aerodynamic optimization for stator vane settings of multi‐stage compressors in a conceptual semi‐closed cycle with the combination of an artificial neural network (ANN) and genetic algorithm (GA). The investigation is conducted on a newly developed 5‐stage highly loaded axial flow compressor. A 3‐layer perceptron neural network is employed as the surrogate model replacing an in‐house one‐dimensional blade‐stacking computation code, and the influences of changes in physical properties of the working medium with varying ratios of exhaust CO 2 recirculation are considered in the computation. The stagger angles of the four stator vanes serve as the input data of the ANN, and the compressor aerodynamic performances are the outputs of the network. The well‐trained ANN is then incorporated into the optimization framework which is based on an improved real‐coded GA. Some advanced strategies including the elitism operator, blend crossover, non‐uniform mutation, and self‐adaption parameters are introduced into the GA to promote the searching efficiency and solution globality. A series of numerical optimization is carried out at various CO 2 contents under part‐speed conditions to achieve the maximum adiabatic efficiency with restrictions on the pressure ratio. The results show that the optimized stator vane settings can improve the adiabatic efficiency by about 1% for most cases, and a considerable reduction of the flow losses near the endwall regions is observed for the reference operating points. Regardless of the assumption of quasi‐one‐dimensional flow, the effectiveness of the optimization framework in dealing with the stage‐mismatching has been demonstrated. This research has allowed to reveal that from the compressor optimization point of view, a semi‐closed cycle is feasible using existing technology and that compressor modifications are needed according to situational requirements. © 2015 Society of Chemical Industry and John Wiley & Sons, Ltd

Suggested Citation

  • Bo Li & Chun‐wei Gu, 2016. "Numerical optimization of a highly loaded compressor in semi‐closed cycles using neural networks and genetic algorithms," Greenhouse Gases: Science and Technology, Blackwell Publishing, vol. 6(2), pages 232-250, April.
    • Handle: RePEc:wly:greenh:v:6:y:2016:i:2:p:232-250
    as

    Download full text from publisher

    File URL: http://hdl.handle.net/10.1002/ghg.1558
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Kvamsdal, Hanne M. & Jordal, Kristin & Bolland, Olav, 2007. "A quantitative comparison of gas turbine cycles with CO2 capture," Energy, Elsevier, vol. 32(1), pages 10-24.
    2. Ghorbanian, K. & Gholamrezaei, M., 2009. "An artificial neural network approach to compressor performance prediction," Applied Energy, Elsevier, vol. 86(7-8), pages 1210-1221, July.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gunasekaran, S. & Mancini, N.D. & El-Khaja, R. & Sheu, E.J. & Mitsos, A., 2014. "Solar–thermal hybridization of advanced zero emissions power cycle," Energy, Elsevier, vol. 65(C), pages 152-165.
    2. Aspelund, Audun & Gundersen, Truls, 2009. "A liquefied energy chain for transport and utilization of natural gas for power production with CO2 capture and storage - Part 4: Sensitivity analysis of transport pressures and benchmarking with conv," Applied Energy, Elsevier, vol. 86(6), pages 815-825, June.
    3. Le Moullec, Yann, 2013. "Conceptual study of a high efficiency coal-fired power plant with CO2 capture using a supercritical CO2 Brayton cycle," Energy, Elsevier, vol. 49(C), pages 32-46.
    4. Håkonsen, Silje Fosse & Grande, Carlos A. & Blom, Richard, 2014. "Rotating bed reactor for CLC: Bed characteristics dependencies on internal gas mixing," Applied Energy, Elsevier, vol. 113(C), pages 1952-1957.
    5. Bhavsar, Saurabh & Isenberg, Natalie & More, Amey & Veser, Götz, 2016. "Lanthana-doped ceria as active support for oxygen carriers in chemical looping combustion," Applied Energy, Elsevier, vol. 168(C), pages 236-247.
    6. Luo, Chending & Zhang, Na, 2012. "Zero CO2 emission SOLRGT power system," Energy, Elsevier, vol. 45(1), pages 312-323.
    7. Ziółkowski, Paweł & Stasiak, Kamil & Amiri, Milad & Mikielewicz, Dariusz, 2023. "Negative carbon dioxide gas power plant integrated with gasification of sewage sludge," Energy, Elsevier, vol. 262(PB).
    8. Artur M. Schweidtmann & Alexander Mitsos, 2019. "Deterministic Global Optimization with Artificial Neural Networks Embedded," Journal of Optimization Theory and Applications, Springer, vol. 180(3), pages 925-948, March.
    9. Turi, Davide Maria & Chiesa, Paolo & Macchi, Ennio & Ghoniem, Ahmed F., 2016. "High fidelity model of the oxygen flux across ion transport membrane reactor: Mechanism characterization using experimental data," Energy, Elsevier, vol. 96(C), pages 127-141.
    10. Balerna, Camillo & Lanzetti, Nicolas & Salazar, Mauro & Cerofolini, Alberto & Onder, Christopher, 2020. "Optimal low-level control strategies for a high-performance hybrid electric power unit," Applied Energy, Elsevier, vol. 276(C).
    11. Zhang, Yi & Xu, Yujie & Zhou, Xuezhi & Guo, Huan & Zhang, Xinjing & Chen, Haisheng, 2019. "Compressed air energy storage system with variable configuration for accommodating large-amplitude wind power fluctuation," Applied Energy, Elsevier, vol. 239(C), pages 957-968.
    12. Martelli, Emanuele & Nord, Lars O. & Bolland, Olav, 2012. "Design criteria and optimization of heat recovery steam cycles for integrated reforming combined cycles with CO2 capture," Applied Energy, Elsevier, vol. 92(C), pages 255-268.
    13. Belaissaoui, Bouchra & Cabot, Gilles & Cabot, Marie-Sophie & Willson, David & Favre, Eric, 2012. "An energetic analysis of CO2 capture on a gas turbine combining flue gas recirculation and membrane separation," Energy, Elsevier, vol. 38(1), pages 167-175.
    14. Li, H. & Yan, J. & Yan, J. & Anheden, M., 2009. "Impurity impacts on the purification process in oxy-fuel combustion based CO2 capture and storage system," Applied Energy, Elsevier, vol. 86(2), pages 202-213, February.
    15. Salkuyeh, Yaser Khojasteh & Elkamel, Ali & Thé, Jesse & Fowler, Michael, 2016. "Development and techno-economic analysis of an integrated petroleum coke, biomass, and natural gas polygeneration process," Energy, Elsevier, vol. 113(C), pages 861-874.
    16. Scaccabarozzi, Roberto & Gatti, Manuele & Martelli, Emanuele, 2016. "Thermodynamic analysis and numerical optimization of the NET Power oxy-combustion cycle," Applied Energy, Elsevier, vol. 178(C), pages 505-526.
    17. Brigagão, George Victor & de Medeiros, José Luiz & Araújo, Ofélia de Queiroz F. & Mikulčić, Hrvoje & Duić, Neven, 2021. "A zero-emission sustainable landfill-gas-to-wire oxyfuel process: Bioenergy with carbon capture and sequestration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 138(C).
    18. Zhang, Weihao & Zou, Zhengping & Ye, Jian, 2012. "Leading-edge redesign of a turbomachinery blade and its effect on aerodynamic performance," Applied Energy, Elsevier, vol. 93(C), pages 655-667.
    19. Finn, Joshua & Wagner, John & Bassily, Hany, 2010. "Monitoring strategies for a combined cycle electric power generator," Applied Energy, Elsevier, vol. 87(8), pages 2621-2627, August.
    20. Yazar, Isil & Yavuz, Hasan Serhan & Yavuz, Arzu Altin, 2017. "Comparison of various regression models for predicting compressor and turbine performance parameters," Energy, Elsevier, vol. 140(P2), pages 1398-1406.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:wly:greenh:v:6:y:2016:i:2:p:232-250. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: https://doi.org/10.1002/(ISSN)2152-3878 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.