IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v306y2024ics0360544224022928.html
   My bibliography  Save this article

Integration of improved meta-heuristic and machine learning for optimizing energy efficiency in additive manufacturing process

Author

Listed:
  • Gao, Baoyun
  • Peng, Shitong
  • Li, Tao
  • Wang, Fengtao
  • Guo, Jianan
  • Liu, Conghu
  • Zhang, Hongchao

Abstract

Additive manufacturing (AM) has been a vital element of smart manufacturing. The high energy intensity or environmental sustainability issue of AM, however, has posed a great challenge to the future massive application, particularly laser-based direct energy deposition (L-DED). This study aims to determine the optimal processing parameters for energy-saving without compromising the geometrical appearance. A quantification model for energy efficiency at the process level was established, with two energy efficiency indicators of AM process. Then, a meta-heuristic Mayfly algorithm, augmented with Bayesian technique and mutation strategies, was proposed to improve hyperparameters in a typical machine learning model (XGBoost). Based on the full factorial L-DED experiments, this study compared the improved XGBoost with four types of XGBoost derivatives via four algorithm evaluation metrics. Non-dominated sorting genetic algorithm II was adopted to optimize the processing parameters subject to the constraints of geometrical appearance. Results indicated that the proposed algorithm outperformed other XGBoost derivatives in terms of prediction accuracy and convergence rate. The energy efficiency could be improved by 76.35 J/g or 6.78 % on average while ensuring the geometry of the deposited layers. This study could help enhance energy-efficient additive manufacturing via proper processing parameters selection and facilitate the sustainability in AM domain.

Suggested Citation

  • Gao, Baoyun & Peng, Shitong & Li, Tao & Wang, Fengtao & Guo, Jianan & Liu, Conghu & Zhang, Hongchao, 2024. "Integration of improved meta-heuristic and machine learning for optimizing energy efficiency in additive manufacturing process," Energy, Elsevier, vol. 306(C).
    • Handle: RePEc:eee:energy:v:306:y:2024:i:c:s0360544224022928
    DOI: 10.1016/j.energy.2024.132518
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224022928
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2024.132518?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Sudipto Chaki & Ravi N. Bathe & Sujit Ghosal & G. Padmanabham, 2018. "Multi-objective optimisation of pulsed Nd:YAG laser cutting process using integrated ANN–NSGAII model," Journal of Intelligent Manufacturing, Springer, vol. 29(1), pages 175-190, January.
    2. Ma, Shuaiyin & Zhang, Yingfeng & Lv, Jingxiang & Ge, Yuntian & Yang, Haidong & Li, Lin, 2020. "Big data driven predictive production planning for energy-intensive manufacturing industries," Energy, Elsevier, vol. 211(C).
    3. do Carmo, Pedro R.X. & do Monte, João Victor L. & Filho, Assis T. de Oliveira & Freitas, Eduardo & Tigre, Matheus F.F.S.L. & Sadok, Djamel & Kelner, Judith, 2023. "A data-driven model for the optimization of energy consumption of an industrial production boiler in a fiber plant," Energy, Elsevier, vol. 284(C).
    4. Hanxin Hu & Ting Sun, 2022. "The Applications of Machine Learning in Accounting and Auditing Research," Springer Books, in: Cheng-Few Lee & Alice C. Lee (ed.), Encyclopedia of Finance, edition 0, chapter 89, pages 2095-2115, Springer.
    5. Güngör, Osman & Tozlu, Alperen & Arslantürk, Cihat & Özahi, Emrah, 2024. "District heating based on exhaust gas produced from end-of-life tires in Erzincan: Thermoeconomic analysis and optimization," Energy, Elsevier, vol. 294(C).
    6. Jeffrey Kuo, Chung-Feng & Su, Te-Li & Jhang, Po-Ruei & Huang, Chao-Yang & Chiu, Chin-Hsun, 2011. "Using the Taguchi method and grey relational analysis to optimize the flat-plate collector process with multiple quality characteristics in solar energy collector manufacturing," Energy, Elsevier, vol. 36(5), pages 3554-3562.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ma, Shuaiyin & Ding, Wei & Liu, Yang & Ren, Shan & Yang, Haidong, 2022. "Digital twin and big data-driven sustainable smart manufacturing based on information management systems for energy-intensive industries," Applied Energy, Elsevier, vol. 326(C).
    2. Roozbeh Vaziri & Akeem Adeyemi Oladipo & Mohsen Sharifpur & Rani Taher & Mohammad Hossein Ahmadi & Alibek Issakhov, 2021. "Efficiency Enhancement in Double-Pass Perforated Glazed Solar Air Heaters with Porous Beds: Taguchi-Artificial Neural Network Optimization and Cost–Benefit Analysis," Sustainability, MDPI, vol. 13(21), pages 1-18, October.
    3. Cen, Xiao & Chen, Zengliang & Chen, Haifeng & Ding, Chen & Ding, Bo & Li, Fei & Lou, Fangwei & Zhu, Zhenyu & Zhang, Hongyu & Hong, Bingyuan, 2024. "User repurchase behavior prediction for integrated energy supply stations based on the user profiling method," Energy, Elsevier, vol. 286(C).
    4. Xiao, Qinge & Li, Congbo & Tang, Ying & Pan, Jian & Yu, Jun & Chen, Xingzheng, 2019. "Multi-component energy modeling and optimization for sustainable dry gear hobbing," Energy, Elsevier, vol. 187(C).
    5. Liu, Shuhan & Sun, Wenqiang, 2023. "Attention mechanism-aided data- and knowledge-driven soft sensors for predicting blast furnace gas generation," Energy, Elsevier, vol. 262(PA).
    6. Aniruddha Gaikwad & Tammy Chang & Brian Giera & Nicholas Watkins & Saptarshi Mukherjee & Andrew Pascall & David Stobbe & Prahalada Rao, 2022. "In-process monitoring and prediction of droplet quality in droplet-on-demand liquid metal jetting additive manufacturing using machine learning," Journal of Intelligent Manufacturing, Springer, vol. 33(7), pages 2093-2117, October.
    7. Chung-Feng Jeffrey Kuo & Sheng-Siang Syu & Chung-Yang Shih & Wei-Lun Lan & Chao-Yang Huang, 2017. "Optimization and practical verification of system configuration parameter design for a photovoltaic thermal system combined with a reflector," Journal of Intelligent Manufacturing, Springer, vol. 28(4), pages 1017-1029, April.
    8. Dongxiang Hou & Xiaodong Wang & Qing Song & Xuesong Mei & Haicheng Wang, 2024. "A quality improvement method for complex component fine manufacturing based on terminal laser beam deflection compensation," Journal of Intelligent Manufacturing, Springer, vol. 35(1), pages 331-341, January.
    9. Dongwei Liu & Jilili Abuduwaili & Lixin Wang, 2015. "Salt dust storm in the Ebinur Lake region: its 50-year dynamic changes and response to climate changes and human activities," Natural Hazards: Journal of the International Society for the Prevention and Mitigation of Natural Hazards, Springer;International Society for the Prevention and Mitigation of Natural Hazards, vol. 77(2), pages 1069-1080, June.
    10. Yang, Jiaojiao & Sun, Zeyi & Hu, Wenqing & Steinmeister, Louis, 2022. "Joint control of manufacturing and onsite microgrid system via novel neural-network integrated reinforcement learning algorithms," Applied Energy, Elsevier, vol. 315(C).
    11. Yuriko Nakao & Aya Ishino & Katsuhiko Kokubu & Hitoshi Okada, 2024. "Exploring visual communication in corporate sustainability reporting: Using image recognition with deep learning," Corporate Social Responsibility and Environmental Management, John Wiley & Sons, vol. 31(4), pages 3210-3234, July.
    12. Liu, Gang & Wang, Kun & Hao, Xiaochen & Zhang, Zhipeng & Zhao, Yantao & Xu, Qingquan, 2022. "SA-LSTMs: A new advance prediction method of energy consumption in cement raw materials grinding system," Energy, Elsevier, vol. 241(C).
    13. Zhen Zhang & Zenan Yang & Chenchong Wang & Wei Xu, 2024. "Accelerating ultrashort pulse laser micromachining process comprehensive optimization using a machine learning cycle design strategy integrated with a physical model," Journal of Intelligent Manufacturing, Springer, vol. 35(1), pages 449-465, January.
    14. Junaid Ahmed & Laveet Kumar & Abdul Fatah Abbasi & Mamdouh El Haj Assad, 2022. "Energy, Exergy, Environmental and Economic Analysis (4e) of a Solar Thermal System for Process Heating in Jamshoro, Pakistan," Energies, MDPI, vol. 15(22), pages 1-18, November.
    15. Kuo, Chung-Feng Jeffrey & Yang, Pei-Chung & Umar, Mega Lazuardi & Lan, Wei-Lun, 2019. "A bifacial photovoltaic thermal system design with parameter optimization and performance beneficial validation," Applied Energy, Elsevier, vol. 247(C), pages 335-349.
    16. Elena Arce, María & Saavedra, Ángeles & Míguez, José L. & Granada, Enrique, 2015. "The use of grey-based methods in multi-criteria decision analysis for the evaluation of sustainable energy systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 47(C), pages 924-932.
    17. Ma, Shuaiyin & Huang, Yuming & Liu, Yang & Liu, Haizhou & Chen, Yanping & Wang, Jin & Xu, Jun, 2023. "Big data-driven correlation analysis based on clustering for energy-intensive manufacturing industries," Applied Energy, Elsevier, vol. 349(C).
    18. Jian Qin & Yipeng Wang & Jialuo Ding & Stewart Williams, 2022. "Optimal droplet transfer mode maintenance for wire + arc additive manufacturing (WAAM) based on deep learning," Journal of Intelligent Manufacturing, Springer, vol. 33(7), pages 2179-2191, October.
    19. Junpeng Fu & Jiuju Cai, 2020. "Study of Heat Transfer and the Hydrodynamic Performance of Gas–Solid Heat Transfer in a Vertical Sinter Cooling Bed Using the CFD-Taguchi-Grey Relational Analysis Method," Energies, MDPI, vol. 13(9), pages 1-30, May.
    20. Xian, Huafeng & Che, Jinxing, 2022. "Multi-space collaboration framework based optimal model selection for power load forecasting," Applied Energy, Elsevier, vol. 314(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:306:y:2024:i:c:s0360544224022928. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.