IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v262y2023ipas0360544222023374.html
   My bibliography  Save this article

Multi-objective optimization of printed circuit heat exchanger used for hydrogen cooler by exergoeconomic method

Author

Listed:
  • Cheng, Yang
  • Li, Yingxiao
  • Wang, Jinghan
  • Tam, Lapmou
  • Chen, Yitung
  • Wang, Qiuwang
  • Ma, Ting

Abstract

Hydrogen cooler is a key equipment of the precooling unit in hydrogen refueling stations with the requirement of high heat transfer efficiency, high compactness and high pressure resistance. Printed circuit heat exchanger is a promising candidate for the hydrogen cooler due to its great performance on extremely high pressure and high temperature working environment. In this paper, a hydrogen cooler with a thermal load of 72 kW is firstly designed by using the segmented thermal design method and logarithmic mean temperature difference method. Then, the capital model of the hydrogen cooler is established to evaluate the performance using the exergoeconomic method. The results show that the operating cost, which is related to exergy destruction, accounts for 94.5% of the total cost of the hydrogen cooler. The thermal exergy destruction accounts for 92.4% of the total exergy destruction. Finally, the geometrical parameters of the channel are optimized by using the multi-objective optimization. The channel radius shows the most significant impact on the construction cost and operating cost among the three geometrical parameters. Compared with the coaxial tube evaporators, the printed circuit heat exchanger has better performance on the volume and total cost, which are reduced by 88.0% and 4.0% respectively.

Suggested Citation

  • Cheng, Yang & Li, Yingxiao & Wang, Jinghan & Tam, Lapmou & Chen, Yitung & Wang, Qiuwang & Ma, Ting, 2023. "Multi-objective optimization of printed circuit heat exchanger used for hydrogen cooler by exergoeconomic method," Energy, Elsevier, vol. 262(PA).
  • Handle: RePEc:eee:energy:v:262:y:2023:i:pa:s0360544222023374
    DOI: 10.1016/j.energy.2022.125455
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222023374
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2022.125455?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Liu, Guangxu & Huang, Yanping & Wang, Junfeng & Liu, Ruilong, 2020. "A review on the thermal-hydraulic performance and optimization of printed circuit heat exchangers for supercritical CO2 in advanced nuclear power systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    2. Xu, Zirui & Chen, Wangnan & Lian, Jie & Yang, Xiongwei & Wang, Qiuwang & Chen, Yitung & Ma, Ting, 2022. "Study on mechanical stress of semicircular and rectangular channels in printed circuit heat exchangers," Energy, Elsevier, vol. 238(PA).
    3. Ma, Yuan & Xie, Gongnan & Hooman, Kamel, 2022. "Review of printed circuit heat exchangers and its applications in solar thermal energy," Renewable and Sustainable Energy Reviews, Elsevier, vol. 155(C).
    4. Guo, Jiangfeng & Huai, Xiulan & Li, Xunfeng & Cai, Jun & Wang, Yongwei, 2013. "Multi-objective optimization of heat exchanger based on entransy dissipation theory in an irreversible Brayton cycle system," Energy, Elsevier, vol. 63(C), pages 95-102.
    5. Ma, Ting & Zhang, Pan & Deng, Tianrui & Ke, Hanbing & Lin, Yuansheng & Wang, Qiuwang, 2021. "Thermal-hydraulic characteristics of printed circuit heat exchanger used for floating natural gas liquefaction," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    6. Piraino, Francesco & Blekhman, David & Dray, Michael & Fragiacomo, Petronilla, 2021. "Empirically verified analysis of dual pre-cooling system for hydrogen refuelling station," Renewable Energy, Elsevier, vol. 163(C), pages 1612-1625.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Li, Qian & Zhan, Qi & Yu, Shipeng & Sun, Jianchuang & Cai, Weihua, 2023. "Study on thermal-hydraulic performance of printed circuit heat exchangers with supercritical methane based on machine learning methods," Energy, Elsevier, vol. 282(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Qian & Zhan, Qi & Yu, Shipeng & Sun, Jianchuang & Cai, Weihua, 2023. "Study on thermal-hydraulic performance of printed circuit heat exchangers with supercritical methane based on machine learning methods," Energy, Elsevier, vol. 282(C).
    2. Guo, Jiangfeng, 2016. "Design analysis of supercritical carbon dioxide recuperator," Applied Energy, Elsevier, vol. 164(C), pages 21-27.
    3. Li, Zhen & Lu, Daogang & Wang, Zhichao & Cao, Qiong, 2023. "Analysis on flow and heat transfer performance of SCO2 in airfoil channels with different fin angles of attack," Energy, Elsevier, vol. 282(C).
    4. Dora Villada-Castillo & Guillermo Valencia-Ochoa & Jorge Duarte-Forero, 2023. "Thermohydraulic and Economic Evaluation of a New Design for Printed Circuit Heat Exchangers in Supercritical CO 2 Brayton Cycle," Energies, MDPI, vol. 16(5), pages 1-24, February.
    5. Dzido, Aleksandra & Wołowicz, Marcin & Krawczyk, Piotr, 2022. "Transcritical carbon dioxide cycle as a way to improve the efficiency of a Liquid Air Energy Storage system," Renewable Energy, Elsevier, vol. 196(C), pages 1385-1391.
    6. Daniarta, Sindu & Nemś, Magdalena & Kolasiński, Piotr, 2023. "A review on thermal energy storage applicable for low- and medium-temperature organic Rankine cycle," Energy, Elsevier, vol. 278(PA).
    7. Guo, Jiangfeng & Song, Jian & Han, Zengxiao & Pervunin, Konstantin S. & Markides, Christos N., 2022. "Investigation of the thermohydraulic characteristics of vertical supercritical CO2 flows at cooling conditions," Energy, Elsevier, vol. 256(C).
    8. Fragiacomo, Petronilla & Martorelli, Michele & Genovese, Matteo & Piraino, Francesco & Corigliano, Orlando, 2024. "Thermodynamic modelling, testing and sensitive analysis of a directly pressurized hydrogen refuelling process with a compressor," Renewable Energy, Elsevier, vol. 226(C).
    9. Tingting Xu & Hongxia Zhao & Miao Wang & Jianhui Qi, 2021. "Numerical Study of Thermal-Hydraulic Performance of a New Spiral Z-Type PCHE for Supercritical CO 2 Brayton Cycle," Energies, MDPI, vol. 14(15), pages 1-16, July.
    10. Wang, Xiaoyin & Zhao, Xiling & Fu, Lin, 2018. "Entransy analysis of secondary network flow distribution in absorption heat exchanger," Energy, Elsevier, vol. 147(C), pages 428-439.
    11. Jiang, Dianqiang & Zhang, Dalin & Li, Xinyu & Wang, Shibao & Wang, Chenglong & Qin, Hao & Guo, Yanwen & Tian, Wenxi & Su, G.H. & Qiu, Suizheng, 2022. "Fluoride-salt-cooled high-temperature reactors: Review of historical milestones, research status, challenges, and outlook," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    12. Yin, Qian & Du, Wen-Jing & Ji, Xing-Lin & Cheng, Lin, 2016. "Optimization design and economic analyses of heat recovery exchangers on rotary kilns," Applied Energy, Elsevier, vol. 180(C), pages 743-756.
    13. Chen, Hui & Liu, Ying-wen, 2021. "A new optimization concept of the recuperator based on Hampson-type miniature cryocoolers," Energy, Elsevier, vol. 224(C).
    14. Genovese, Matteo & Fragiacomo, Petronilla, 2021. "Parametric technical-economic investigation of a pressurized hydrogen electrolyzer unit coupled with a storage compression system," Renewable Energy, Elsevier, vol. 180(C), pages 502-515.
    15. Zheng, Dan & Du, Jianqiang & Wang, Wei & Klemeš, Jiří Jaromír & Wang, Jin & Sundén, Bengt, 2022. "Analysis of thermal efficiency of a corrugated double-tube heat exchanger with nanofluids," Energy, Elsevier, vol. 256(C).
    16. Han, Zengxiao & Guo, Jiangfeng & Huai, Xiulan, 2023. "Theoretical analysis of a novel PCHE with enhanced rib structures for high-power supercritical CO2 Brayton cycle system based on solar energy," Energy, Elsevier, vol. 270(C).
    17. Sun, Jinxiang & Zhang, Ruibo & Wang, Mingjun & Zhang, Jing & Qiu, Suizheng & Tian, Wenxi & Su, G.H., 2022. "Multi-objective optimization of helical coil steam generator in high temperature gas reactors with genetic algorithm and response surface method," Energy, Elsevier, vol. 259(C).
    18. Gaoliang Liao & Zhizhou Li & Feng Zhang & Lijun Liu & Jiaqiang E, 2021. "A Review on the Thermal-Hydraulic Performance and Optimization of Compact Heat Exchangers," Energies, MDPI, vol. 14(19), pages 1-35, September.
    19. Khoshvaght-Aliabadi, Morteza & Ghodrati, Parvaneh & Mahian, Omid & Kang, Yong Tae, 2024. "Performance evaluation of non-uniform twisted designs in precooler of supercritical CO2 power cycle," Energy, Elsevier, vol. 292(C).
    20. Chen, Hui & Wei, Chen-xi & Ding, Wen-hao & Liu, Ying-wen, 2023. "Optimization of miniature Joule-Thomson cryocooler with non-isometric recuperator on transient characteristics," Energy, Elsevier, vol. 267(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:262:y:2023:i:pa:s0360544222023374. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.