IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v292y2024ics0360544224002184.html
   My bibliography  Save this article

Performance evaluation of non-uniform twisted designs in precooler of supercritical CO2 power cycle

Author

Listed:
  • Khoshvaght-Aliabadi, Morteza
  • Ghodrati, Parvaneh
  • Mahian, Omid
  • Kang, Yong Tae

Abstract

Twisted structures have been commonly used to improve heat transfer in tubular heat exchangers operating at regular pressures. However, their behavior under supercritical operating conditions remains unknown, and the thermal and hydraulic characteristics of a precooler equipped with twisted structures in a supercritical carbon dioxide (SCO2) cycle have not been studied before. For this reason, 3D simulations are conducted to explore the flow and heat transfer of SCO2 in a precooler featuring both twisted tubes and twisted tapes. Furthermore, four non-uniform configurations are designed for each twisted structure. The obtained results indicate that for SCO2 in a gas-like state, the use of twisted tubes is more suitable, whereas, for SCO2 in a liquid-like state, the use of twisted tapes is more appropriate. Twisted configurations exhibit a heat transfer coefficient ranging from 1.11 to 1.48 times higher than that of the straight mini-tube. Non-uniform structures can help control and tailor turbulence levels according to SCO2's thermophysical properties variations. The results reveal that shorter twist pitches at the beginning of the flow path in non-uniform twisted tubes and in the middle section for twisted tapes provide the best overall performance, with significant heat transfer enhancement and a relatively low pressure drop penalty.

Suggested Citation

  • Khoshvaght-Aliabadi, Morteza & Ghodrati, Parvaneh & Mahian, Omid & Kang, Yong Tae, 2024. "Performance evaluation of non-uniform twisted designs in precooler of supercritical CO2 power cycle," Energy, Elsevier, vol. 292(C).
  • Handle: RePEc:eee:energy:v:292:y:2024:i:c:s0360544224002184
    DOI: 10.1016/j.energy.2024.130447
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544224002184
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2024.130447?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Liu, Guangxu & Huang, Yanping & Wang, Junfeng & Liu, Ruilong, 2020. "A review on the thermal-hydraulic performance and optimization of printed circuit heat exchangers for supercritical CO2 in advanced nuclear power systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    2. Chang, Hongliang & Han, Zeran & Li, Xionghui & Ma, Ting & Wang, Qiuwang, 2022. "Experimental investigation on heat transfer performance based on average thermal-resistance ratio for supercritical carbon dioxide in asymmetric airfoil-fin printed circuit heat exchanger," Energy, Elsevier, vol. 254(PB).
    3. Khoshvaght-Aliabadi, Morteza & Ghodrati, Parvaneh & Kang, Yong Tae, 2023. "Optimal combination of converging and diverging minichannels in PCHE as precooler under diverse operating conditions of supercritical CO2," Energy, Elsevier, vol. 272(C).
    4. Fu, Qianmei & Ding, Jing & Lao, Jiewei & Wang, Weilong & Lu, Jianfeng, 2019. "Thermal-hydraulic performance of printed circuit heat exchanger with supercritical carbon dioxide airfoil fin passage and molten salt straight passage," Applied Energy, Elsevier, vol. 247(C), pages 594-604.
    5. Han, Zengxiao & Guo, Jiangfeng & Huai, Xiulan, 2023. "Theoretical analysis of a novel PCHE with enhanced rib structures for high-power supercritical CO2 Brayton cycle system based on solar energy," Energy, Elsevier, vol. 270(C).
    6. Wang, Yiming & Xie, Gongnan & Zhu, Huaitao & Yuan, Han, 2023. "Assessment on energy and exergy of combined supercritical CO2 Brayton cycles with sizing printed-circuit-heat-exchangers," Energy, Elsevier, vol. 263(PA).
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Khoshvaght-Aliabadi, Morteza & Ghodrati, Parvaneh & Mahian, Omid & Kang, Yong Tae, 2024. "CFD study of rib-enhanced printed circuit heat exchangers for precoolers in solar power plants' supercritical CO2 cycle," Energy, Elsevier, vol. 292(C).
    2. Li, Zhen & Lu, Daogang & Wang, Zhichao & Cao, Qiong, 2023. "Analysis on flow and heat transfer performance of SCO2 in airfoil channels with different fin angles of attack," Energy, Elsevier, vol. 282(C).
    3. Li, Qian & Zhan, Qi & Yu, Shipeng & Sun, Jianchuang & Cai, Weihua, 2023. "Study on thermal-hydraulic performance of printed circuit heat exchangers with supercritical methane based on machine learning methods," Energy, Elsevier, vol. 282(C).
    4. Dzido, Aleksandra & Wołowicz, Marcin & Krawczyk, Piotr, 2022. "Transcritical carbon dioxide cycle as a way to improve the efficiency of a Liquid Air Energy Storage system," Renewable Energy, Elsevier, vol. 196(C), pages 1385-1391.
    5. Jiang, Dianqiang & Zhang, Dalin & Li, Xinyu & Wang, Shibao & Wang, Chenglong & Qin, Hao & Guo, Yanwen & Tian, Wenxi & Su, G.H. & Qiu, Suizheng, 2022. "Fluoride-salt-cooled high-temperature reactors: Review of historical milestones, research status, challenges, and outlook," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    6. Liu, Bohan & Lu, Mingjian & Shui, Bo & Sun, Yuwei & Wei, Wei, 2022. "Thermal-hydraulic performance analysis of printed circuit heat exchanger precooler in the Brayton cycle for supercritical CO2 waste heat recovery," Applied Energy, Elsevier, vol. 305(C).
    7. Gaoliang Liao & Zhizhou Li & Feng Zhang & Lijun Liu & Jiaqiang E, 2021. "A Review on the Thermal-Hydraulic Performance and Optimization of Compact Heat Exchangers," Energies, MDPI, vol. 14(19), pages 1-35, September.
    8. Liu, Guangxu & Huang, Yanping & Wang, Junfeng & Liu, Ruilong, 2020. "A review on the thermal-hydraulic performance and optimization of printed circuit heat exchangers for supercritical CO2 in advanced nuclear power systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    9. Zhang, Dalin & Li, Xinyu & Jiang, Dianqiang & Zhou, Xingguang & Lv, Xindi & Yun, Shichang & Wu, Wenqiang & He, Xuanang & Li, Haoyang & Min, Xin & Chen, Kailong & Tian, Wenxi & Qiu, Suizheng & Su, G.H., 2024. "Fluoride-Salt-cooled high-Temperature Advanced Reactor (FuSTAR): An integrated nuclear-based energy production and conversion system," Energy, Elsevier, vol. 290(C).
    10. Tavakoli, Ali & Farzaneh-Gord, Mahmood & Ebrahimi-Moghadam, Amir, 2023. "Using internal sinusoidal fins and phase change material for performance enhancement of thermal energy storage systems: Heat transfer and entropy generation analyses," Renewable Energy, Elsevier, vol. 205(C), pages 222-237.
    11. Dora Villada-Castillo & Guillermo Valencia-Ochoa & Jorge Duarte-Forero, 2023. "Thermohydraulic and Economic Evaluation of a New Design for Printed Circuit Heat Exchangers in Supercritical CO 2 Brayton Cycle," Energies, MDPI, vol. 16(5), pages 1-24, February.
    12. Cheng, Yang & Li, Yingxiao & Wang, Jinghan & Tam, Lapmou & Chen, Yitung & Wang, Qiuwang & Ma, Ting, 2023. "Multi-objective optimization of printed circuit heat exchanger used for hydrogen cooler by exergoeconomic method," Energy, Elsevier, vol. 262(PA).
    13. Tingting Xu & Hongxia Zhao & Miao Wang & Jianhui Qi, 2021. "Numerical Study of Thermal-Hydraulic Performance of a New Spiral Z-Type PCHE for Supercritical CO 2 Brayton Cycle," Energies, MDPI, vol. 14(15), pages 1-16, July.
    14. Han, Zengxiao & Guo, Jiangfeng & Huai, Xiulan, 2023. "Theoretical analysis of a novel PCHE with enhanced rib structures for high-power supercritical CO2 Brayton cycle system based on solar energy," Energy, Elsevier, vol. 270(C).
    15. Zhou, Jincheng & Hai, Tao & Ali, Masood Ashraf & Shamseldin, Mohamed A. & Almojil, Sattam Fahad & Almohana, Abdulaziz Ibrahim & Alali, Abdulrhman Fahmi, 2023. "Waste heat recovery of a wind turbine for poly-generation purpose: Feasibility analysis, environmental impact assessment, and parametric optimization," Energy, Elsevier, vol. 263(PD).
    16. Liu, Penghua & Wang, Renting & Liu, Shaobei & Bao, Zewei, 2023. "Experimental study on the thermal-hydraulic performance of a tube-in-tube helical coil air–fuel heat exchanger for an aero-engine," Energy, Elsevier, vol. 267(C).
    17. Zhang, Enbo & Watanabe, Toshinori & Lai, Zitian & Bai, Bofeng, 2024. "A compressible flow solver for turbomachinery of the real gases with strongly variable properties," Energy, Elsevier, vol. 290(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:292:y:2024:i:c:s0360544224002184. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.