IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v189y2019ics0360544219319620.html
   My bibliography  Save this article

Numerical and experimental investigation to visualize the fluid flow and thermal characteristics of a cryogenic turboexpander

Author

Listed:
  • Kumar, Manoj
  • Behera, Suraj K.
  • Kumar, Amitesh
  • Sahoo, Ranjit K.

Abstract

The increasing demand for cryogenic fluids is acquiring the research attention to develop efficient machines to produce cryogenic temperature such as turboexpander based system. The expansion turbine and nozzle of a turboexpander are the critical components of such systems, and its performance has a significant effect on the overall efficiency of the system. In this paper, the effective design methodology of a radial inflow turbine by considering different loss models is presented. The methodology consists of one-dimensional modeling to describe the geometrical parameters of the nozzle and turbine. The optimal range of important non-dimensional variables such as blade speed, pressure ratio, ratio of hub and shroud radius to turbine inlet radius are predicted using artificial intelligence techniques for better performance of the turbine. This approach improves the turbine efficiency and power output by 4% and 18.9% respectively as compared to the existing model. The three-dimensional numerical investigation is carried out to visualize the fluid flow and thermal characteristics of the designed turbine and nozzle. The study also focuses on to identify the flow separation zone, tip leakage flow, vortex formation, secondary losses and its reasons at different spanwise locations of the turbine. Additionally, Sobol sensitivity analysis method is used to distinguish the significance of different assumed constants on the total losses and non-dimensional design variables on total-to-static efficiency. Finally, the numerical results are validated with experimental data of a case study. The study highlights the importance of the design methodology, the prediction capability of artificial intelligence method, Sobol sensitivity analysis, the experimental techniques and benchmarking model for numerical analysis at different cryogenic temperature.

Suggested Citation

  • Kumar, Manoj & Behera, Suraj K. & Kumar, Amitesh & Sahoo, Ranjit K., 2019. "Numerical and experimental investigation to visualize the fluid flow and thermal characteristics of a cryogenic turboexpander," Energy, Elsevier, vol. 189(C).
    • Handle: RePEc:eee:energy:v:189:y:2019:i:c:s0360544219319620
    DOI: 10.1016/j.energy.2019.116267
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544219319620
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2019.116267?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Kang, Seok Hun, 2016. "Design and preliminary tests of ORC (organic Rankine cycle) with two-stage radial turbine," Energy, Elsevier, vol. 96(C), pages 142-154.
    2. Klonowicz, Piotr & Heberle, Florian & Preißinger, Markus & Brüggemann, Dieter, 2014. "Significance of loss correlations in performance prediction of small scale, highly loaded turbine stages working in Organic Rankine Cycles," Energy, Elsevier, vol. 72(C), pages 322-330.
    3. Zhang, Zhenying & Li, Minxia & Ma, Yitai & Gong, Xiufeng, 2015. "Experimental investigation on a turbo expander substituted for throttle valve in the subcritical refrigeration system," Energy, Elsevier, vol. 79(C), pages 195-202.
    4. Salahshoor, Karim & Kordestani, Mojtaba & Khoshro, Majid S., 2010. "Fault detection and diagnosis of an industrial steam turbine using fusion of SVM (support vector machine) and ANFIS (adaptive neuro-fuzzy inference system) classifiers," Energy, Elsevier, vol. 35(12), pages 5472-5482.
    5. Ghorbanian, K. & Gholamrezaei, M., 2009. "An artificial neural network approach to compressor performance prediction," Applied Energy, Elsevier, vol. 86(7-8), pages 1210-1221, July.
    6. Wang, Xiaojing & Zou, Zhengping, 2019. "Uncertainty analysis of impact of geometric variations on turbine blade performance," Energy, Elsevier, vol. 176(C), pages 67-80.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zhou, Kaimiao & Zhao, Kang & Chen, Liang & Zhang, Ze & Deng, Kunyu & Chen, Shuangtao & Hou, Yu, 2024. "High-efficiency control strategies of a hydrogen turbo-expander for a 5 t/d hydrogen liquefier," Energy, Elsevier, vol. 297(C).
    2. Meng, Yang & Zhang, Yicheng & Wang, Junxin & Chen, Shuangtao & Hou, Yu & Chen, Liang, 2023. "Performance optimization of turboexpander-compressors for energy recovery in small air-separation plants," Energy, Elsevier, vol. 271(C).
    3. Wang, Chenghong & Sun, Daming & Shen, Qie & Duan, Yuanyuan & Huang, Xiaoxue, 2024. "A re-liquefaction process of LNG boil-off gas using an improved Kapitsa cycle: Eliminating the BOG compressor," Energy, Elsevier, vol. 304(C).
    4. Wang, Chenghong & Sun, Daming & Shen, Qie & Shen, Keyi & Duan, Yuanyuan, 2024. "Optimization of coalbed methane liquefaction process based on parallel nitrogen reverse Brayton cycle under varying methane contents and liquefaction ratios," Energy, Elsevier, vol. 293(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kaczmarczyk, Tomasz Z. & Żywica, Grzegorz & Ihnatowicz, Eugeniusz, 2017. "The impact of changes in the geometry of a radial microturbine stage on the efficiency of the micro CHP plant based on ORC," Energy, Elsevier, vol. 137(C), pages 530-543.
    2. Bamorovat Abadi, Gholamreza & Kim, Kyung Chun, 2017. "Investigation of organic Rankine cycles with zeotropic mixtures as a working fluid: Advantages and issues," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 1000-1013.
    3. Huang, Chung-Neng & Chen, Yui-Sung, 2017. "Design of magnetic flywheel control for performance improvement of fuel cells used in vehicles," Energy, Elsevier, vol. 118(C), pages 840-852.
    4. Wang, Zheng & Xie, Jinghao & Zhao, Wenke & Zhang, Yaning & Li, Bingxi, 2024. "Energetic, exergetic and economic analysis of a trans-critical solar hybrid CCHP system," Renewable Energy, Elsevier, vol. 233(C).
    5. Feng Lu & Jipeng Jiang & Jinquan Huang & Xiaojie Qiu, 2018. "An Iterative Reduced KPCA Hidden Markov Model for Gas Turbine Performance Fault Diagnosis," Energies, MDPI, vol. 11(7), pages 1-21, July.
    6. Braimakis, Konstantinos & Karellas, Sotirios, 2017. "Integrated thermoeconomic optimization of standard and regenerative ORC for different heat source types and capacities," Energy, Elsevier, vol. 121(C), pages 570-598.
    7. Zhu, L. & Li, M.S. & Wu, Q.H. & Jiang, L., 2015. "Short-term natural gas demand prediction based on support vector regression with false neighbours filtered," Energy, Elsevier, vol. 80(C), pages 428-436.
    8. Artur M. Schweidtmann & Alexander Mitsos, 2019. "Deterministic Global Optimization with Artificial Neural Networks Embedded," Journal of Optimization Theory and Applications, Springer, vol. 180(3), pages 925-948, March.
    9. Wang, Yuqi & Du, Qiuwan & Li, Yunzhu & Zhang, Di & Xie, Yonghui, 2022. "Field reconstruction and off-design performance prediction of turbomachinery in energy systems based on deep learning techniques," Energy, Elsevier, vol. 238(PB).
    10. Witanowski, Ł. & Klonowicz, P. & Lampart, P. & Suchocki, T. & Jędrzejewski, Ł. & Zaniewski, D. & Klimaszewski, P., 2020. "Optimization of an axial turbine for a small scale ORC waste heat recovery system," Energy, Elsevier, vol. 205(C).
    11. Schifflechner, Christopher & Kuhnert, Lara & Irrgang, Ludwig & Dawo, Fabian & Kaufmann, Florian & Wieland, Christoph & Spliethoff, Hartmut, 2023. "Geothermal trigeneration systems with Organic Rankine Cycles: Evaluation of different plant configurations considering part load behaviour," Renewable Energy, Elsevier, vol. 207(C), pages 218-233.
    12. Weiß, Andreas P. & Novotný, Václav & Popp, Tobias & Streit, Philipp & Špale, Jan & Zinn, Gerd & Kolovratník, Michal, 2020. "Customized ORC micro turbo-expanders - From 1D design to modular construction kit and prospects of additive manufacturing," Energy, Elsevier, vol. 209(C).
    13. Balerna, Camillo & Lanzetti, Nicolas & Salazar, Mauro & Cerofolini, Alberto & Onder, Christopher, 2020. "Optimal low-level control strategies for a high-performance hybrid electric power unit," Applied Energy, Elsevier, vol. 276(C).
    14. Zhang, Yi & Xu, Yujie & Zhou, Xuezhi & Guo, Huan & Zhang, Xinjing & Chen, Haisheng, 2019. "Compressed air energy storage system with variable configuration for accommodating large-amplitude wind power fluctuation," Applied Energy, Elsevier, vol. 239(C), pages 957-968.
    15. Li, Jinxing & Liu, Tianyuan & Zhu, Guangya & Li, Yunzhu & Xie, Yonghui, 2023. "Uncertainty quantification and aerodynamic robust optimization of turbomachinery based on graph learning methods," Energy, Elsevier, vol. 273(C).
    16. Wang, Dabiao & Ma, Yuezheng & Tian, Ran & Duan, Jie & Hu, Busong & Shi, Lin, 2018. "Thermodynamic evaluation of an ORC system with a Low Pressure Saturated Steam heat source," Energy, Elsevier, vol. 149(C), pages 375-385.
    17. Ntavou, Erika & Kosmadakis, George & Manolakos, Dimitris & Papadakis, George & Papantonis, Dimitris, 2017. "Experimental testing of a small-scale two stage Organic Rankine Cycle engine operating at low temperature," Energy, Elsevier, vol. 141(C), pages 869-879.
    18. Sun, Rongzhuo & Shi, Licheng & Yang, Xilian & Wang, Yuzhang & Zhao, Qunfei, 2020. "A coupling diagnosis method of sensors faults in gas turbine control system," Energy, Elsevier, vol. 205(C).
    19. Zhang, Weihao & Zou, Zhengping & Ye, Jian, 2012. "Leading-edge redesign of a turbomachinery blade and its effect on aerodynamic performance," Applied Energy, Elsevier, vol. 93(C), pages 655-667.
    20. Finn, Joshua & Wagner, John & Bassily, Hany, 2010. "Monitoring strategies for a combined cycle electric power generator," Applied Energy, Elsevier, vol. 87(8), pages 2621-2627, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:189:y:2019:i:c:s0360544219319620. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.