IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v17y2025i3p1257-d1583491.html
   My bibliography  Save this article

Solar Stirling for Renewable Energy Multigeneration Systems

Author

Listed:
  • Georg Klepp

    (Institute for Energy Research (iFE), University of Applied Sciences and Arts Ostwestfalen-Lippe, D32657 Lemgo, Germany)

Abstract

This study explores the feasibility and potential of integrating dish–Stirling systems (DSSs) into multigeneration energy systems, focusing on their ability to produce both thermal and electrical energy. By leveraging the concentrated solar power capabilities of DSSs, this research examines their performance relative to alternative solutions such as photovoltaic (PV) systems and solar heating. A 25 kW Stirling Energy Systems (SES) DSS served as the basis for the analysis. Simulations were performed for local 2022 weather conditions in Germany. The study employed a detailed modeling approach using the NREL System Advisor Model (SAM) to quantify the energy outputs and evaluate the system efficiencies. The results indicate that the DSS achieved an electrical efficiency of 25% and a combined efficiency of 78% when accounting for the maximum thermal energy generated. Seasonal analysis highlights the adaptability to fluctuating energy demands, with advantages in winter heating applications. Comparative evaluations revealed DSSs as a viable cogeneration alternative to standalone PV systems and solar heaters, offering reduced environmental impacts and enhanced energy efficiency. Future work will address real-world operational conditions, including thermal storage and multigeneration integration, positioning the DSS as a sustainable solution for renewable energy generation.

Suggested Citation

  • Georg Klepp, 2025. "Solar Stirling for Renewable Energy Multigeneration Systems," Sustainability, MDPI, vol. 17(3), pages 1-14, February.
    • Handle: RePEc:gam:jsusta:v:17:y:2025:i:3:p:1257-:d:1583491
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/17/3/1257/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/17/3/1257/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Rogdakis, E.D. & Antonakos, G.D. & Koronaki, I.P., 2012. "Thermodynamic analysis and experimental investigation of a Solo V161 Stirling cogeneration unit," Energy, Elsevier, vol. 45(1), pages 503-511.
    2. Habes Ali Khawaldeh & Bashar Shboul & Mohammad Al-Smairan & Mohammad Al-Soeidat & Dylan Lu & Fares Almomani, 2024. "Comparative Energy and Economic Analysis of Dish Stirling Engine and National Grid Electricity for Residential Building in Mafraq, Jordan," Sustainability, MDPI, vol. 16(14), pages 1-15, July.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hooshang, M. & Askari Moghadam, R. & AlizadehNia, S., 2016. "Dynamic response simulation and experiment for gamma-type Stirling engine," Renewable Energy, Elsevier, vol. 86(C), pages 192-205.
    2. Cheng, Chin-Hsiang & Yang, Hang-Suin & Keong, Lam, 2013. "Theoretical and experimental study of a 300-W beta-type Stirling engine," Energy, Elsevier, vol. 59(C), pages 590-599.
    3. Pablo Jimenez Zabalaga & Evelyn Cardozo & Luis A. Choque Campero & Joseph Adhemar Araoz Ramos, 2020. "Performance Analysis of a Stirling Engine Hybrid Power System," Energies, MDPI, vol. 13(4), pages 1-38, February.
    4. Ferreira, Ana C. & Nunes, Manuel L. & Teixeira, José C.F. & Martins, Luís A.S.B. & Teixeira, Senhorinha F.C.F., 2016. "Thermodynamic and economic optimization of a solar-powered Stirling engine for micro-cogeneration purposes," Energy, Elsevier, vol. 111(C), pages 1-17.
    5. Zhu, Shunmin & Yu, Guoyao & O, Jongmin & Xu, Tao & Wu, Zhanghua & Dai, Wei & Luo, Ercang, 2018. "Modeling and experimental investigation of a free-piston Stirling engine-based micro-combined heat and power system," Applied Energy, Elsevier, vol. 226(C), pages 522-533.
    6. Costa, Sol-Carolina & Tutar, Mustafa & Barreno, Igor & Esnaola, Jon-Ander & Barrutia, Haritz & García, David & González, Miguel-Angel & Prieto, Jesús-Ignacio, 2014. "Experimental and numerical flow investigation of Stirling engine regenerator," Energy, Elsevier, vol. 72(C), pages 800-812.
    7. Paul, Christopher J. & Engeda, Abraham, 2015. "Modeling a complete Stirling engine," Energy, Elsevier, vol. 80(C), pages 85-97.
    8. Ferreira, Ana Cristina & Silva, João & Teixeira, Senhorinha & Teixeira, José Carlos & Nebra, Silvia Azucena, 2020. "Assessment of the Stirling engine performance comparing two renewable energy sources: Solar energy and biomass," Renewable Energy, Elsevier, vol. 154(C), pages 581-597.
    9. Zhu, Shunmin & Yu, Guoyao & Liang, Kun & Dai, Wei & Luo, Ercang, 2021. "A review of Stirling-engine-based combined heat and power technology," Applied Energy, Elsevier, vol. 294(C).
    10. Sala, Fernando & Invernizzi, Costante M., 2014. "Low temperature Stirling engines pressurised with real gas effects," Energy, Elsevier, vol. 75(C), pages 225-236.
    11. Chmielewski, Adrian & Gumiński, Robert & Mączak, Jędrzej & Radkowski, Stanisław & Szulim, Przemysław, 2016. "Aspects of balanced development of RES and distributed micro-cogeneration use in Poland: Case study of a µCHP with Stirling engine," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 930-952.
    12. Qiu, Songgang & Gao, Yuan & Rinker, Garrett & Yanaga, Koji, 2019. "Development of an advanced free-piston Stirling engine for micro combined heating and power application," Applied Energy, Elsevier, vol. 235(C), pages 987-1000.
    13. İncili, Veysel & Karaca Dolgun, Gülşah & Keçebaş, Ali & Ural, Tolga, 2023. "Energy and exergy analyses of a coal-fired micro-CHP system coupled engine as a domestic solution," Energy, Elsevier, vol. 274(C).
    14. González-Pino, I. & Pérez-Iribarren, E. & Campos-Celador, A. & Las-Heras-Casas, J. & Sala, J.M., 2015. "Influence of the regulation framework on the feasibility of a Stirling engine-based residential micro-CHP installation," Energy, Elsevier, vol. 84(C), pages 575-588.
    15. İncili, Veysel & Karaca Dolgun, Gülşah & Georgiev, Aleksandar & Keçebaş, Ali & Çetin, Numan Sabit, 2022. "Performance evaluation of novel photovoltaic and Stirling assisted hybrid micro combined heat and power system," Renewable Energy, Elsevier, vol. 189(C), pages 129-138.
    16. Comodi, Gabriele & Cioccolanti, Luca & Renzi, Massimiliano, 2014. "Modelling the Italian household sector at the municipal scale: Micro-CHP, renewables and energy efficiency," Energy, Elsevier, vol. 68(C), pages 92-103.
    17. Li, Zhigang & Haramura, Yoshihiko & Kato, Yohei & Tang, Dawei, 2014. "Analysis of a high performance model Stirling engine with compact porous-sheets heat exchangers," Energy, Elsevier, vol. 64(C), pages 31-43.
    18. Peter Durcansky & Radovan Nosek & Jozef Jandacka, 2020. "Use of Stirling Engine for Waste Heat Recovery," Energies, MDPI, vol. 13(16), pages 1-15, August.
    19. Meybodi, Mehdi Aghaei & Behnia, Masud, 2013. "Australian coal mine methane emissions mitigation potential using a Stirling engine-based CHP system," Energy Policy, Elsevier, vol. 62(C), pages 10-18.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:17:y:2025:i:3:p:1257-:d:1583491. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.