IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v17y2024i2p441-d1320282.html
   My bibliography  Save this article

Electrochemical Synthesis of Ammonia via Nitrogen Reduction and Oxygen Evolution Reactions—A Comprehensive Review on Electrolyte-Supported Cells

Author

Listed:
  • Hizkia Manuel Vieri

    (Hydrogen·Fuel Cell Research Center, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea)

  • Moo-Chang Kim

    (Hydrogen·Fuel Cell Research Center, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea
    Department of Mechanical and Automotive Engineering, Seoul National University of Science and Technology, Seoul 01811, Republic of Korea)

  • Arash Badakhsh

    (PNDC, University of Strathclyde, Glasgow G68 0EF, UK)

  • Sun Hee Choi

    (Hydrogen·Fuel Cell Research Center, Korea Institute of Science and Technology (KIST), Seoul 02792, Republic of Korea
    Energy & Environment Technology, KIST School, University of Science and Technology (UST), Seoul 02792, Republic of Korea)

Abstract

The application of protonic ceramic electrolysis cells (PCECs) for ammonia (NH 3 ) synthesis has been evaluated over the past 14 years. While nitrogen (N 2 ) is the conventional fuel on the cathode side, various fuels such as methane (CH 4 ), hydrogen (H 2 ), and steam (H 2 O) have been investigated for the oxygen evolution reaction (OER) on the anode side. Because H 2 is predominantly produced through CO 2 -emitting methane reforming, H 2 O has been the conventional carbon-free option thus far. Although the potential of utilizing H 2 O and N 2 as fuels is considerable, studies exploring this specific combination remain limited. PCEC fabrication technologies are being developed extensively, thus necessitating a comprehensive review. Several strategies for electrode fabrication, deposition, and electrolyte design are discussed herein. The progress in electrode development for PCECs has also been delineated. Finally, the existing challenges and prospective outlook of PCEC for NH 3 synthesis are analyzed and discussed. The most significant finding is the lack of past research involving PCEC with H 2 O and N 2 as fuel configurations and the diversity of nitrogen reduction reaction catalysts. This review indicates that the maximum NH 3 synthesis rate is 14 × 10 −9 mol cm −2 s −1, and the maximum current density for the OER catalyst is 1.241 A cm −2 . Moreover, the pellet electrolyte thickness must be maintained at approximately 0.8–1.5 mm, and the stability of thin-film electrolytes must be improved.

Suggested Citation

  • Hizkia Manuel Vieri & Moo-Chang Kim & Arash Badakhsh & Sun Hee Choi, 2024. "Electrochemical Synthesis of Ammonia via Nitrogen Reduction and Oxygen Evolution Reactions—A Comprehensive Review on Electrolyte-Supported Cells," Energies, MDPI, vol. 17(2), pages 1-14, January.
    • Handle: RePEc:gam:jeners:v:17:y:2024:i:2:p:441-:d:1320282
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/17/2/441/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/17/2/441/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Serdar Yilmaz & Bekir Kavici & Prakash Ramakrishnan & Cigdem Celen & Bahman Amini Horri, 2023. "Highly Conductive Cerium- and Neodymium-Doped Barium Zirconate Perovskites for Protonic Ceramic Fuel Cells," Energies, MDPI, vol. 16(11), pages 1-14, May.
    2. Hanping Ding & Wei Wu & Chao Jiang & Yong Ding & Wenjuan Bian & Boxun Hu & Prabhakar Singh & Christopher J. Orme & Lucun Wang & Yunya Zhang & Dong Ding, 2020. "Self-sustainable protonic ceramic electrochemical cells using a triple conducting electrode for hydrogen and power production," Nature Communications, Nature, vol. 11(1), pages 1-11, December.
    3. Sihyuk Choi & Chris J. Kucharczyk & Yangang Liang & Xiaohang Zhang & Ichiro Takeuchi & Ho-Il Ji & Sossina M. Haile, 2018. "Exceptional power density and stability at intermediate temperatures in protonic ceramic fuel cells," Nature Energy, Nature, vol. 3(3), pages 202-210, March.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kai Pei & Yucun Zhou & Kang Xu & Hua Zhang & Yong Ding & Bote Zhao & Wei Yuan & Kotaro Sasaki & YongMan Choi & Yu Chen & Meilin Liu, 2022. "Surface restructuring of a perovskite-type air electrode for reversible protonic ceramic electrochemical cells," Nature Communications, Nature, vol. 13(1), pages 1-10, December.
    2. Lei, Libin & Mo, Yingyu & Huang, Yue & Qiu, Ruiming & Tian, Zhipeng & Wang, Junyao & Liu, Jianping & Chen, Ying & Zhang, Jihao & Tao, Zetian & Liang, Bo & Wang, Chao, 2023. "Revealing and quantifying the role of oxygen-ionic current in proton-conducting solid oxide fuel cells: A modeling study," Energy, Elsevier, vol. 276(C).
    3. Serdar Yilmaz & Bekir Kavici & Prakash Ramakrishnan & Cigdem Celen & Bahman Amini Horri, 2023. "Highly Conductive Cerium- and Neodymium-Doped Barium Zirconate Perovskites for Protonic Ceramic Fuel Cells," Energies, MDPI, vol. 16(11), pages 1-14, May.
    4. Chang, Wanhyuk & Kang, Eun Heui & Jeong, Heon Jun & Choi, Wonjoon & Shim, Joon Hyung, 2023. "Inkjet printing of perovskite ceramics for high-performance proton ceramic fuel cells," Energy, Elsevier, vol. 268(C).
    5. Zuoqing Liu & Yuesheng Bai & Hainan Sun & Daqin Guan & Wenhuai Li & Wei-Hsiang Huang & Chih-Wen Pao & Zhiwei Hu & Guangming Yang & Yinlong Zhu & Ran Ran & Wei Zhou & Zongping Shao, 2024. "Synergistic dual-phase air electrode enables high and durable performance of reversible proton ceramic electrochemical cells," Nature Communications, Nature, vol. 15(1), pages 1-15, December.
    6. Hong Zhang & Zuobin Zhang & Zhou Li & Hongjie Han & Weiguo Song & Jianxin Yi, 2023. "A chemiresistive-potentiometric multivariate sensor for discriminative gas detection," Nature Communications, Nature, vol. 14(1), pages 1-9, December.
    7. Choi, Sung Min & An, Hyegsoon & Yoon, Kyung Joong & Kim, Byung-Kook & Lee, Hae-Weon & Son, Ji-Won & Kim, Hyoungchul & Shin, Dongwook & Ji, Ho-Il & Lee, Jong-Ho, 2019. "Electrochemical analysis of high-performance protonic ceramic fuel cells based on a columnar-structured thin electrolyte," Applied Energy, Elsevier, vol. 233, pages 29-36.
    8. Jolaoso, Lateef A. & Yousuf, Abu & Liu, Fan & Duan, Chuancheng & Kazempoor, Pejman, 2024. "Efficient Energy Storage via Methane Production Using Protonic Ceramic Electrochemical Cells," Applied Energy, Elsevier, vol. 369(C).
    9. Mohsen Fallah Vostakola & Hasan Ozcan & Rami S. El-Emam & Bahman Amini Horri, 2023. "Recent Advances in High-Temperature Steam Electrolysis with Solid Oxide Electrolysers for Green Hydrogen Production," Energies, MDPI, vol. 16(8), pages 1-50, April.
    10. Peimiao Zou & Dinu Iuga & Sanliang Ling & Alex J. Brown & Shigang Chen & Mengfei Zhang & Yisong Han & A. Dominic Fortes & Christopher M. Howard & Shanwen Tao, 2024. "A fast ceramic mixed OH−/H+ ionic conductor for low temperature fuel cells," Nature Communications, Nature, vol. 15(1), pages 1-20, December.
    11. Kyungpyo Hong & Mingi Choi & Yonggyun Bae & Jihong Min & Jaeyeob Lee & Donguk Kim & Sehee Bang & Han-Koo Lee & Wonyoung Lee & Jongsup Hong, 2023. "Direct methane protonic ceramic fuel cells with self-assembled Ni-Rh bimetallic catalyst," Nature Communications, Nature, vol. 14(1), pages 1-9, December.
    12. Lu, Yuzheng & Mushtaq, Naveed & Yousaf Shah, M.A.K. & Irshad, Muhammad Sultan & Rauf, Sajid & Xia, Chen & Yousaf, Muhammad & Raza, Rizwan & Lund, Peter D. & Zhu, Bin, 2022. "Improved self-consistency and oxygen reduction activity of CaFe2O4 for protonic ceramic fuel cell by porous NiO-foam support," Renewable Energy, Elsevier, vol. 199(C), pages 1451-1460.
    13. Li, Zheng & Yu, Jie & Wang, Chen & Bello, Idris Temitope & Yu, Na & Chen, Xi & Zheng, Keqing & Han, Minfang & Ni, Meng, 2024. "Multi-objective optimization of protonic ceramic electrolysis cells based on a deep neural network surrogate model," Applied Energy, Elsevier, vol. 365(C).
    14. Danilov, Nikolay & Lyagaeva, Julia & Vdovin, Gennady & Medvedev, Dmitry, 2019. "Multifactor performance analysis of reversible solid oxide cells based on proton-conducting electrolytes," Applied Energy, Elsevier, vol. 237(C), pages 924-934.
    15. Jadhav, Dipak A. & Park, Sung-Gwan & Eisa, Tasnim & Mungray, Arvind K. & Madenli, Evrim Celik & Olabi, Abdul-Ghani & Abdelkareem, Mohammad Ali & Chae, Kyu-Jung, 2022. "Current outlook towards feasibility and sustainability of ceramic membranes for practical scalable applications of microbial fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 167(C).
    16. Kim, J. & Sengodan, S. & Kim, S. & Kwon, O. & Bu, Y. & Kim, G., 2019. "Proton conducting oxides: A review of materials and applications for renewable energy conversion and storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 109(C), pages 606-618.
    17. Rasaki, S.A. & Liu, C. & Lao, C. & Zhang, H. & Chen, Z., 2021. "The innovative contribution of additive manufacturing towards revolutionizing fuel cell fabrication for clean energy generation: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 148(C).
    18. Fan Liu & Chuancheng Duan, 2021. "Direct-Hydrocarbon Proton-Conducting Solid Oxide Fuel Cells," Sustainability, MDPI, vol. 13(9), pages 1-9, April.
    19. Kei Saito & Masatomo Yashima, 2023. "High proton conductivity within the ‘Norby gap’ by stabilizing a perovskite with disordered intrinsic oxygen vacancies," Nature Communications, Nature, vol. 14(1), pages 1-10, December.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:17:y:2024:i:2:p:441-:d:1320282. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.