IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v15y2022i5p1707-d758034.html
   My bibliography  Save this article

The Effect of J-Groove on Vortex Suppression and Energy Dissipation in a Draft Tube of Francis Turbine

Author

Listed:
  • Zhumei Luo

    (Department of Energy and Power Engineering, Kunming University of Science and Technology, Kunming 650093, China)

  • Cong Nie

    (Department of Energy and Power Engineering, Kunming University of Science and Technology, Kunming 650093, China)

  • Shunli Lv

    (Department of Energy and Power Engineering, Kunming University of Science and Technology, Kunming 650093, China)

  • Tao Guo

    (Department of Engineering Mechanics, Faculty of Civil Engineering and Mechanics, Kunming University of Science and Technology, Kunming 650500, China)

  • Suoming Gao

    (Shenzhen Water Planning & Design Institute Company Limited, Kunming 650032, China)

Abstract

The vortex rope in the draft tube is considered as the major contributor to pressure pulsation at partial load (PL) conditions, which causes the hydro unit to operate unstably. Based on the prototype Francis turbine HLA551-LJ-43 in the laboratory, J-grooves are designed on its conical section in this paper. We used numerical simulation to study the effect of the J-grooves on vortex suppression and energy dissipation in the draft tube. Four typical operating conditions were chosen to analyze the vortex suppression; the corresponding flow ratios Q * are 100%, 82%, 69%, and 53%, respectively. Entropy production theory is used to calculate the energy losses and assess the effect of the J-groove on energy dissipation under part-load conditions. By comparing entropy production, circumferential and axial velocity components, swirl intensity, pressure pulsation, and vortex distribution in a draft tube with and without J-grooves at different operating conditions, it can be concluded that the entropy production on the wall containing a conical section with J-grooves is obviously smaller than that without J-grooves, the effects of J-grooves on reducing circumferential velocity component V u , pressure pulsation, and weakening vortex intensity and vortex rope in the conical section are obvious, especially at part load and deep part-load operating conditions. Using J-grooves shows better performance on vortex control and energy dissipation in the draft tube of a Francis turbine at partial load conditions.

Suggested Citation

  • Zhumei Luo & Cong Nie & Shunli Lv & Tao Guo & Suoming Gao, 2022. "The Effect of J-Groove on Vortex Suppression and Energy Dissipation in a Draft Tube of Francis Turbine," Energies, MDPI, vol. 15(5), pages 1-20, February.
    • Handle: RePEc:gam:jeners:v:15:y:2022:i:5:p:1707-:d:758034
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/15/5/1707/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/15/5/1707/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Jafarzadeh Juposhti, Hessan & Maddahian, Reza & Cervantes, Michel J., 2021. "Optimization of axial water injection to mitigate the Rotating Vortex Rope in a Francis turbine," Renewable Energy, Elsevier, vol. 175(C), pages 214-231.
    2. Božić, Ivan, 2021. "A novel energy losses dependence on integral swirl flow parameters in an elbow draft tube of a Kaplan turbine," Renewable Energy, Elsevier, vol. 175(C), pages 550-558.
    3. Sotoudeh, Nahale & Maddahian, Reza & Cervantes, Michel J., 2020. "Investigation of Rotating Vortex Rope formation during load variation in a Francis turbine draft tube," Renewable Energy, Elsevier, vol. 151(C), pages 238-254.
    4. Cheng, Huan & Zhou, Lingjiu & Liang, Quanwei & Guan, Ziwu & Liu, Demin & Wang, Zhaoning & Kang, Wenzhe, 2020. "A method of evaluating the vortex rope strength in draft tube of Francis turbine," Renewable Energy, Elsevier, vol. 152(C), pages 770-780.
    5. KC, Anup & Lee, Young Ho & Thapa, Bhola, 2016. "CFD study on prediction of vortex shedding in draft tube of Francis turbine and vortex control techniques," Renewable Energy, Elsevier, vol. 86(C), pages 1406-1421.
    6. Muhirwa, Alexis & Cai, Wei-Hua & Su, Wen-Tao & Liu, Quanzhong & Binama, Maxime & Li, Biao & Wu, Jian, 2020. "A review on remedial attempts to counteract the power generation compromise from draft tubes of hydropower plants," Renewable Energy, Elsevier, vol. 150(C), pages 743-764.
    7. Unterluggauer, Julian & Sulzgruber, Verena & Doujak, Eduard & Bauer, Christian, 2020. "Experimental and numerical study of a prototype Francis turbine startup," Renewable Energy, Elsevier, vol. 157(C), pages 1212-1221.
    8. Yu, An & Tang, Qinghong & Chen, Huixiang & Zhou, Daqing, 2021. "Investigations of the thermodynamic entropy evaluation in a hydraulic turbine under various operating conditions," Renewable Energy, Elsevier, vol. 180(C), pages 1026-1043.
    9. Liu, Xin & Luo, Yongyao & Karney, Bryan W. & Wang, Weizheng, 2015. "A selected literature review of efficiency improvements in hydraulic turbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 18-28.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Pang, Shujiao & Zhu, Baoshan & Shen, Yunde & Chen, Zhenmu, 2024. "Study on suppression of cavitating vortex rope on pump-turbines by J-groove," Applied Energy, Elsevier, vol. 360(C).
    2. Li, Wei & Long, Yu & Ji, Leilei & Li, Haoming & Li, Shuo & Chen, Yunfei & Yang, Qiaoyue, 2024. "Effect of circumferential spokes on the rotating stall flow field of mixed-flow pump," Energy, Elsevier, vol. 290(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Su, Wen-Tao & Binama, Maxime & Li, Yang & Zhao, Yue, 2020. "Study on the method of reducing the pressure fluctuation of hydraulic turbine by optimizing the draft tube pressure distribution," Renewable Energy, Elsevier, vol. 162(C), pages 550-560.
    2. Shiraghaee, Shahab & Sundström, Joel & Raisee, Mehrdad & Cervantes, Michel J., 2024. "Extending the operating range of axial turbines with the protrusion of radially adjustable flat plates: An experimental investigation," Renewable Energy, Elsevier, vol. 225(C).
    3. Zhou, Xing & Hu, Xinyi & Huang, Quanshui & Wu, Hegao & Tang, Xiaodan & Cervantes, Michel J., 2024. "Optimization design of an innovative francis draft tube: Insight into improving operational flexibility," Energy, Elsevier, vol. 299(C).
    4. Wang, Wen-Quan & Yu, Zhi-Feng & Yan, Yan & Wei, Xin-Yu, 2024. "Numerical investigation on vortex characteristics in a low-head Francis turbine operating of adjustable-speed at part load conditions," Energy, Elsevier, vol. 302(C).
    5. Lei Wang & Jiayi Cui & Lingfeng Shu & Denghui Jiang & Chun Xiang & Linwei Li & Peijian Zhou, 2022. "Research on the Vortex Rope Control Techniques in Draft Tube of Francis Turbines," Energies, MDPI, vol. 15(24), pages 1-27, December.
    6. Sun, Longgang & Xu, Hongyang & Li, Chenxi & Guo, Pengcheng & Xu, Zhuofei, 2024. "Unsteady assessment and alleviation of inter-blade vortex in Francis turbine," Applied Energy, Elsevier, vol. 358(C).
    7. Kim, Seung-Jun & Yang, Hyeon-Mo & Park, Jungwan & Kim, Jin-Hyuk, 2022. "Investigation of internal flow characteristics by a Thoma number in the turbine mode of a Pump–Turbine model under high flow rate," Renewable Energy, Elsevier, vol. 199(C), pages 445-461.
    8. Zaher Mundher Yaseen & Ameen Mohammed Salih Ameen & Mohammed Suleman Aldlemy & Mumtaz Ali & Haitham Abdulmohsin Afan & Senlin Zhu & Ahmed Mohammed Sami Al-Janabi & Nadhir Al-Ansari & Tiyasha Tiyasha &, 2020. "State-of-the Art-Powerhouse, Dam Structure, and Turbine Operation and Vibrations," Sustainability, MDPI, vol. 12(4), pages 1-40, February.
    9. Zhou, Ling & Hang, Jianwei & Bai, Ling & Krzemianowski, Zbigniew & El-Emam, Mahmoud A. & Yasser, Eman & Agarwal, Ramesh, 2022. "Application of entropy production theory for energy losses and other investigation in pumps and turbines: A review," Applied Energy, Elsevier, vol. 318(C).
    10. Raluca Gabriela Iovănel & Arash Soltani Dehkharqani & Diana Maria Bucur & Michel Jose Cervantes, 2022. "Numerical Simulation and Experimental Validation of a Kaplan Prototype Turbine Operating on a Cam Curve," Energies, MDPI, vol. 15(11), pages 1-24, June.
    11. Sergey Shtork & Daniil Suslov & Sergey Skripkin & Ivan Litvinov & Evgeny Gorelikov, 2023. "An Overview of Active Control Techniques for Vortex Rope Mitigation in Hydraulic Turbines," Energies, MDPI, vol. 16(13), pages 1-31, July.
    12. Shahzer, Mohammad Abu & Kim, Jin-Hyuk, 2024. "Investigation of role of fins in a Francis turbine model's cavitation-induced instabilities under design and off-design conditions," Energy, Elsevier, vol. 292(C).
    13. Muhirwa, Alexis & Cai, Wei-Hua & Su, Wen-Tao & Liu, Quanzhong & Binama, Maxime & Li, Biao & Wu, Jian, 2020. "A review on remedial attempts to counteract the power generation compromise from draft tubes of hydropower plants," Renewable Energy, Elsevier, vol. 150(C), pages 743-764.
    14. Salehi, Saeed & Nilsson, Håkan & Lillberg, Eric & Edh, Nicolas, 2021. "An in-depth numerical analysis of transient flow field in a Francis turbine during shutdown," Renewable Energy, Elsevier, vol. 179(C), pages 2322-2347.
    15. Wang, Huan & Li, Wenfeng & Hou, Yaochun & Wu, Peng & Huang, Bin & Wu, Kelin & Wu, Dazhuan, 2023. "Recognition of the developing vortex rope in Francis turbine draft tube based on PSO-CS2," Renewable Energy, Elsevier, vol. 217(C).
    16. Salehi, Saeed & Nilsson, Håkan, 2022. "Flow-induced pulsations in Francis turbines during startup - A consequence of an intermittent energy system," Renewable Energy, Elsevier, vol. 188(C), pages 1166-1183.
    17. Zhou, Xing & Shi, Changzheng & Miyagawa, Kazuyoshi & Wu, Hegao, 2021. "Effect of modified draft tube with inclined conical diffuser on flow instabilities in Francis turbine," Renewable Energy, Elsevier, vol. 172(C), pages 606-617.
    18. Rafel Roig & Xavier Sánchez-Botello & Xavier Escaler & Berhanu Mulu & Carl-Maikel Högström, 2022. "On the Rotating Vortex Rope and Its Induced Structural Response in a Kaplan Turbine Model," Energies, MDPI, vol. 15(17), pages 1-19, August.
    19. He, Xianghui & Yang, Jiandong & Yang, Jiebin & Zhao, Zhigao & Hu, Jinhong & Peng, Tao, 2023. "Evolution mechanism of water column separation in pump turbine: Model experiment and occurrence criterion," Energy, Elsevier, vol. 265(C).
    20. Alerci, A.L. & Vagnoni, E. & Paolone, M., 2023. "Structural impact of the start-up sequence on Pelton turbines lifetime: Analytical prediction and polynomial optimization," Renewable Energy, Elsevier, vol. 218(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:15:y:2022:i:5:p:1707-:d:758034. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.