IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i14p4244-d594024.html
   My bibliography  Save this article

Leakage Vortex Progression through a Guide Vane’s Clearance Gap and the Resulting Pressure Fluctuation in a Francis Turbine

Author

Listed:
  • Nirmal Acharya

    (Waterpower Laboratory, Department of Energy & Process Engineering, Norwegian University of Science and Technology, NO-7491 Trondheim, Norway)

  • Saroj Gautam

    (Turbine Testing Lab, Kathmandu University, Dhulikhel 45210, Nepal)

  • Sailesh Chitrakar

    (Turbine Testing Lab, Kathmandu University, Dhulikhel 45210, Nepal)

  • Chirag Trivedi

    (Waterpower Laboratory, Department of Energy & Process Engineering, Norwegian University of Science and Technology, NO-7491 Trondheim, Norway)

  • Ole Gunnar Dahlhaug

    (Waterpower Laboratory, Department of Energy & Process Engineering, Norwegian University of Science and Technology, NO-7491 Trondheim, Norway)

Abstract

A clearance gap (CG) between guide vanes (GVs) and facing plates exists at both ends of a Francis turbine and allows the opening angle to be adjusted for varying operating conditions. Leakage flow is induced through this gap due to the pressure difference between the two sides of the guide vanes. While some research works have used qualitative approaches to visualize and predict the strength of a leakage vortex (LV), this paper presents a method for quantifying vortices along a trajectory. In this paper, a prototype high-head Francis runner with specific speed of 85.4 is considered as a reference case. A systematic investigation across both space and time is carried out, i.e., analysis of the spatial temporal progression of LV for three operating conditions. While travelling from the CG to runner leading edge, LV evolution and trajectory data are observed and the values of vorticity and turbulent kinetic energy are calculated for the LV trajectory. Frequency spectrum analyses of pressure oscillations in the vaneless space, runner blade, and draft tube are also performed to observe the peak pressure pulsation and its harmonics. Unsteady fluctuations of the runner output torque are finally studied to identify the patterns and magnitudes of torque oscillations.

Suggested Citation

  • Nirmal Acharya & Saroj Gautam & Sailesh Chitrakar & Chirag Trivedi & Ole Gunnar Dahlhaug, 2021. "Leakage Vortex Progression through a Guide Vane’s Clearance Gap and the Resulting Pressure Fluctuation in a Francis Turbine," Energies, MDPI, vol. 14(14), pages 1-19, July.
  • Handle: RePEc:gam:jeners:v:14:y:2021:i:14:p:4244-:d:594024
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/14/4244/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/14/14/4244/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Thapa, Biraj Singh & Dahlhaug, Ole Gunnar & Thapa, Bhola, 2017. "Sediment erosion induced leakage flow from guide vane clearance gap in a low specific speed Francis turbine," Renewable Energy, Elsevier, vol. 107(C), pages 253-261.
    2. Zhang, Yuning & Liu, Kaihua & Xian, Haizhen & Du, Xiaoze, 2018. "A review of methods for vortex identification in hydroturbines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 1269-1285.
    3. Ravi Koirala & Baoshan Zhu & Hari Prasad Neopane, 2016. "Effect of Guide Vane Clearance Gap on Francis Turbine Performance," Energies, MDPI, vol. 9(4), pages 1-14, April.
    4. Xing Zhou & Changzheng Shi & Kazuyoshi Miyagawa & Hegao Wu & Jinhong Yu & Zhu Ma, 2020. "Investigation of Pressure Fluctuation and Pulsating Hydraulic Axial Thrust in Francis Turbines," Energies, MDPI, vol. 13(7), pages 1-16, April.
    5. Yabin Liu & Lei Tan & Binbin Wang, 2018. "A Review of Tip Clearance in Propeller, Pump and Turbine," Energies, MDPI, vol. 11(9), pages 1-30, August.
    6. Han, Yadong & Tan, Lei, 2020. "Dynamic mode decomposition and reconstruction of tip leakage vortex in a mixed flow pump as turbine at pump mode," Renewable Energy, Elsevier, vol. 155(C), pages 725-734.
    7. Arispe, Tania M. & de Oliveira, Waldir & Ramirez, Ramiro G., 2018. "Francis turbine draft tube parameterization and analysis of performance characteristics using CFD techniques," Renewable Energy, Elsevier, vol. 127(C), pages 114-124.
    8. Liu, Yabin & Han, Yadong & Tan, Lei & Wang, Yuming, 2020. "Blade rotation angle on energy performance and tip leakage vortex in a mixed flow pump as turbine at pump mode," Energy, Elsevier, vol. 206(C).
    9. Chirag Trivedi & Michel J. Cervantes & B. K. Gandhi, 2016. "Investigation of a High Head Francis Turbine at Runaway Operating Conditions," Energies, MDPI, vol. 9(3), pages 1-22, March.
    10. Christian Helmenstein & Thomas Url, 1995. "Identifying Common Fluctuations in Europe," WIFO Working Papers 76, WIFO.
    11. Laouari, Ahmed & Ghenaiet, Adel, 2019. "Predicting unsteady behavior of a small francis turbine at several operating points," Renewable Energy, Elsevier, vol. 133(C), pages 712-724.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Kan, Kan & Zhang, Qingying & Xu, Zhe & Zheng, Yuan & Gao, Qiang & Shen, Lian, 2022. "Energy loss mechanism due to tip leakage flow of axial flow pump as turbine under various operating conditions," Energy, Elsevier, vol. 255(C).
    2. Huang, Zhenwei & Huang, Zhenyou & Fan, Honggang, 2020. "Influence of C groove on energy performance and noise source of a NACA0009 hydrofoil with tip clearance," Renewable Energy, Elsevier, vol. 159(C), pages 726-735.
    3. Xu, Zhe & Zheng, Yuan & Kan, Kan & Chen, Huixiang, 2023. "Flow instability and energy performance of a coastal axial-flow pump as turbine under the influence of upstream waves," Energy, Elsevier, vol. 272(C).
    4. Pei, Yingju & Liu, Qingyou & Wang, Chuan & Wang, Guorong, 2021. "Energy efficiency prediction model and energy characteristics of subsea disc pump based on velocity slip and similarity theory," Energy, Elsevier, vol. 229(C).
    5. Daqing Zhou & Huixiang Chen & Jie Zhang & Shengwen Jiang & Jia Gui & Chunxia Yang & An Yu, 2019. "Numerical Study on Flow Characteristics in a Francis Turbine during Load Rejection," Energies, MDPI, vol. 12(4), pages 1-15, February.
    6. Jiang, Bo & Sun, Guoyong & Wang, Yuchuan & Mao, Xiuli & Tan, Lei, 2022. "Coherent structures decomposition of the flow field in Francis turbine runner under different working conditions," Renewable Energy, Elsevier, vol. 186(C), pages 717-729.
    7. Maxime Binama & Kan Kan & Huixiang Chen & Yuan Zheng & Daqing Zhou & Alexis Muhirwa & Godfrey M. Bwimba, 2021. "Investigation into Pump Mode Flow Dynamics for a Mixed Flow PAT with Adjustable Runner Blades," Energies, MDPI, vol. 14(9), pages 1-28, May.
    8. Kan, Kan & Binama, Maxime & Chen, Huixiang & Zheng, Yuan & Zhou, Daqing & Su, Wentao & Muhirwa, Alexis, 2022. "Pump as turbine cavitation performance for both conventional and reverse operating modes: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    9. Han, Yadong & Liu, Yabin & Tan, Lei, 2022. "Method of variable-depth groove on vortex and cavitation suppression for a NACA0009 hydrofoil with tip clearance in tidal energy," Renewable Energy, Elsevier, vol. 199(C), pages 546-559.
    10. Pu, Kexin & Huang, Bin & Miao, Hongjiang & Shi, Peili & Wu, Dazhuan, 2022. "Quantitative analysis of energy loss and vibration performance in a circulating axial pump," Energy, Elsevier, vol. 243(C).
    11. Feng, Chen & Zheng, Yuan & Li, Chaoshun & Mai, Zijun & Wu, Wei & Chen, Huixiang, 2021. "Cost advantage of adjustable-speed pumped storage unit for daily operation in distributed hybrid system," Renewable Energy, Elsevier, vol. 176(C), pages 1-10.
    12. C M, Shashikumar & Madav, Vasudeva, 2021. "Numerical and experimental investigation of modified V-shaped turbine blades for hydrokinetic energy generation," Renewable Energy, Elsevier, vol. 177(C), pages 1170-1197.
    13. Zhang, Jingjing & Li, Huanhuan & Chen, Diyi & Xu, Beibei & Mahmud, Md Apel, 2021. "Flexibility assessment of a hybrid power system: Hydroelectric units in balancing the injection of wind power," Renewable Energy, Elsevier, vol. 171(C), pages 1313-1326.
    14. Li, Wei & Ji, Leilei & Li, Enda & Shi, Weidong & Agarwal, Ramesh & Zhou, Ling, 2021. "Numerical investigation of energy loss mechanism of mixed-flow pump under stall condition," Renewable Energy, Elsevier, vol. 167(C), pages 740-760.
    15. Sotoudeh, Nahale & Maddahian, Reza & Cervantes, Michel J., 2020. "Investigation of Rotating Vortex Rope formation during load variation in a Francis turbine draft tube," Renewable Energy, Elsevier, vol. 151(C), pages 238-254.
    16. Xi, Shen & Desheng, Zhang & Bin, Xu & Weidong, Shi & (Bart) van Esch, B.P.M., 2021. "Experimental and numerical investigation on the effect of tip leakage vortex induced cavitating flow on pressure fluctuation in an axial flow pump," Renewable Energy, Elsevier, vol. 163(C), pages 1195-1209.
    17. Muhirwa, Alexis & Cai, Wei-Hua & Su, Wen-Tao & Liu, Quanzhong & Binama, Maxime & Li, Biao & Wu, Jian, 2020. "A review on remedial attempts to counteract the power generation compromise from draft tubes of hydropower plants," Renewable Energy, Elsevier, vol. 150(C), pages 743-764.
    18. Zhou, Xing & Wu, Hegao & Cheng, Li & Huang, Quanshui & Shi, Changzheng, 2023. "A new draft tube shape optimisation methodology of introducing inclined conical diffuser in hydraulic turbine," Energy, Elsevier, vol. 265(C).
    19. Adnan Aslam Noon & Man-Hoe Kim, 2021. "Sediment and Cavitation Erosion in Francis Turbines—Review of Latest Experimental and Numerical Techniques," Energies, MDPI, vol. 14(6), pages 1-19, March.
    20. Zhijian Li & Wei Wang & Xiang Ji & Xiaofang Wang, 2021. "Investigation of Water Injection Influence on Cloud Cavitating Vortical Flow for a NACA66 (MOD) Hydrofoil," Energies, MDPI, vol. 14(18), pages 1-21, September.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:14:p:4244-:d:594024. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.