IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i14p4146-d591661.html
   My bibliography  Save this article

Life Cycle Assessment of the Use of Phase Change Material in an Evacuated Solar Tube Collector

Author

Listed:
  • Agnieszka Jachura

    (Faculty of Infrastructure and Environment, Czestochowa University of Technology, 42-201 Częstochowa, Poland)

  • Robert Sekret

    (Faculty of Infrastructure and Environment, Czestochowa University of Technology, 42-201 Częstochowa, Poland)

Abstract

This paper presents an environmental impact assessment of the entire cycle of existence of the tube-vacuum solar collector prototype. The innovativeness of the solution involved using a phase change material as a heat-storing material, which was placed inside the collector’s tubes-vacuum. The PCM used in this study was paraffin. The system boundaries contained three phases: production, operation (use phase), and disposal. An ecological life cycle assessment was carried out using the SimaPro software. To compare the environmental impact of heat storage, the amount of heat generated for 15 years, starting from the beginning of a solar installation for preparing domestic hot water for a single-family residential building, was considered the functional unit. Assuming comparable production methods for individual elements of the ETC and waste management scenarios, the reduction in harmful effects on the environment by introducing a PCM that stores heat inside the ETC ranges from 17 to 24%. The performed analyses have also shown that the method itself of manufacturing the materials used for the construction of the solar collector and the choice of the scenario of the disposal of waste during decommissioning the solar collector all play an important role in its environmental assessment. With an increase in the application of the advanced technologies of materials manufacturing and an increase in the amount of waste subjected to recycling, the degree of the solar collector’s environmental impact decreased by 82% compared to its standard manufacture and disposal.

Suggested Citation

  • Agnieszka Jachura & Robert Sekret, 2021. "Life Cycle Assessment of the Use of Phase Change Material in an Evacuated Solar Tube Collector," Energies, MDPI, vol. 14(14), pages 1-18, July.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:14:p:4146-:d:591661
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/14/4146/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/14/4146/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Moss, R.W. & Henshall, P. & Arya, F. & Shire, G.S.F. & Hyde, T. & Eames, P.C., 2018. "Performance and operational effectiveness of evacuated flat plate solar collectors compared with conventional thermal, PVT and PV panels," Applied Energy, Elsevier, vol. 216(C), pages 588-601.
    2. Luca Ciacci & Fabrizio Passarini, 2020. "Life Cycle Assessment (LCA) of Environmental and Energy Systems," Energies, MDPI, vol. 13(22), pages 1-8, November.
    3. Arnaoutakis, Nektarios & Milousi, Maria & Papaefthimiou, Spiros & Fokaides, Paris A. & Caouris, Yannis G. & Souliotis, Manolis, 2019. "Life cycle assessment as a methodological tool for the optimum design of integrated collector storage solar water heaters," Energy, Elsevier, vol. 182(C), pages 1084-1099.
    4. Motte, F. & Notton, G. & Lamnatou, Chr & Cristofari, C. & Chemisana, D., 2019. "Numerical study of PCM integration impact on overall performances of a highly building-integrated solar collector," Renewable Energy, Elsevier, vol. 137(C), pages 10-19.
    5. Chang, Yuan & Ries, Robert J. & Wang, Yaowu, 2013. "Life-cycle energy of residential buildings in China," Energy Policy, Elsevier, vol. 62(C), pages 656-664.
    6. Calise, Francesco & Cappiello, Francesco Liberato & Dentice d’Accadia, Massimo & Vicidomini, Maria, 2020. "Dynamic modelling and thermoeconomic analysis of micro wind turbines and building integrated photovoltaic panels," Renewable Energy, Elsevier, vol. 160(C), pages 633-652.
    7. Ralph Eismann & Sebastian Hummel & Federico Giovannetti, 2021. "A Thermal-Hydraulic Model for the Stagnation of Solar Thermal Systems with Flat-Plate Collector Arrays," Energies, MDPI, vol. 14(3), pages 1-39, January.
    8. Roberta Di Bari & Rafael Horn & Björn Nienborg & Felix Klinker & Esther Kieseritzky & Felix Pawelz, 2020. "The Environmental Potential of Phase Change Materials in Building Applications. A Multiple Case Investigation Based on Life Cycle Assessment and Building Simulation," Energies, MDPI, vol. 13(12), pages 1-30, June.
    9. Lamnatou, Chr. & Chemisana, D., 2017. "Concentrating solar systems: Life Cycle Assessment (LCA) and environmental issues," Renewable and Sustainable Energy Reviews, Elsevier, vol. 78(C), pages 916-932.
    10. Maria Milousi & Manolis Souliotis & George Arampatzis & Spiros Papaefthimiou, 2019. "Evaluating the Environmental Performance of Solar Energy Systems Through a Combined Life Cycle Assessment and Cost Analysis," Sustainability, MDPI, vol. 11(9), pages 1-23, May.
    11. Marrasso, E. & Roselli, C. & Sasso, M. & Tariello, F., 2019. "Comparison of centralized and decentralized air-conditioning systems for a multi-storey/multi users building integrated with electric and diesel vehicles and considering the evolution of the national ," Energy, Elsevier, vol. 177(C), pages 319-333.
    12. Masruroh, Nur Aini & Li, Bo & Klemeš, Jiri, 2006. "Life cycle analysis of a solar thermal system with thermochemical storage process," Renewable Energy, Elsevier, vol. 31(4), pages 537-548.
    13. Martin Beer & Radim Rybár & Michal Cehlár & Sergey Zhironkin & Peter Sivák, 2020. "Design and Numerical Study of the Novel Manifold Header for the Evacuated Tube Solar Collector," Energies, MDPI, vol. 13(10), pages 1-12, May.
    14. Gao, Datong & Gao, Guangtao & Cao, Jingyu & Zhong, Shuai & Ren, Xiao & Dabwan, Yousef N. & Hu, Maobin & Jiao, Dongsheng & Kwan, Trevor Hocksun & Pei, Gang, 2020. "Experimental and numerical analysis of an efficiently optimized evacuated flat plate solar collector under medium temperature," Applied Energy, Elsevier, vol. 269(C).
    15. Zhou, D. & Zhao, C.Y. & Tian, Y., 2012. "Review on thermal energy storage with phase change materials (PCMs) in building applications," Applied Energy, Elsevier, vol. 92(C), pages 593-605.
    16. Maria Leonor Carvalho & Andrea Temporelli & Pierpaolo Girardi, 2021. "Life Cycle Assessment of Stationary Storage Systems within the Italian Electric Network," Energies, MDPI, vol. 14(8), pages 1-19, April.
    17. Cabeza, Luisa F. & Rincón, Lídia & Vilariño, Virginia & Pérez, Gabriel & Castell, Albert, 2014. "Life cycle assessment (LCA) and life cycle energy analysis (LCEA) of buildings and the building sector: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 29(C), pages 394-416.
    18. Sokhansefat, Tahmineh & Kasaeian, Alibakhsh & Rahmani, Kiana & Heidari, Ameneh Haji & Aghakhani, Faezeh & Mahian, Omid, 2018. "Thermoeconomic and environmental analysis of solar flat plate and evacuated tube collectors in cold climatic conditions," Renewable Energy, Elsevier, vol. 115(C), pages 501-508.
    19. Daniele Fiaschi & Giampaolo Manfrida & Karolina Petela & Federico Rossi & Adalgisa Sinicropi & Lorenzo Talluri, 2020. "Exergo-Economic and Environmental Analysis of a Solar Integrated Thermo-Electric Storage," Energies, MDPI, vol. 13(13), pages 1-21, July.
    20. Feliński, P. & Sekret, R., 2016. "Experimental study of evacuated tube collector/storage system containing paraffin as a PCM," Energy, Elsevier, vol. 114(C), pages 1063-1072.
    21. Umara Khan & Ron Zevenhoven & Tor-Martin Tveit, 2020. "Evaluation of the Environmental Sustainability of a Stirling Cycle-Based Heat Pump Using LCA," Energies, MDPI, vol. 13(17), pages 1-16, August.
    22. Federico Rossi & Maria Laura Parisi & Sarah Greven & Riccardo Basosi & Adalgisa Sinicropi, 2020. "Life Cycle Assessment of Classic and Innovative Batteries for Solar Home Systems in Europe," Energies, MDPI, vol. 13(13), pages 1-27, July.
    23. Lamnatou, Chr. & Cristofari, C. & Chemisana, D. & Canaletti, J.L., 2016. "Building-integrated solar thermal systems based on vacuum-tube technology: Critical factors focusing on life-cycle environmental profile," Renewable and Sustainable Energy Reviews, Elsevier, vol. 65(C), pages 1199-1215.
    24. Vincenzo Muteri & Maurizio Cellura & Domenico Curto & Vincenzo Franzitta & Sonia Longo & Marina Mistretta & Maria Laura Parisi, 2020. "Review on Life Cycle Assessment of Solar Photovoltaic Panels," Energies, MDPI, vol. 13(1), pages 1-38, January.
    25. Ardente, Fulvio & Beccali, Giorgio & Cellura, Maurizio & Lo Brano, Valerio, 2005. "Life cycle assessment of a solar thermal collector: sensitivity analysis, energy and environmental balances," Renewable Energy, Elsevier, vol. 30(2), pages 109-130.
    26. Piotr Olczak & Dominika Matuszewska & Jadwiga Zabagło, 2020. "The Comparison of Solar Energy Gaining Effectiveness between Flat Plate Collectors and Evacuated Tube Collectors with Heat Pipe: Case Study," Energies, MDPI, vol. 13(7), pages 1-14, April.
    27. Ardente, Fulvio & Beccali, Giorgio & Cellura, Maurizio & Lo Brano, Valerio, 2005. "Life cycle assessment of a solar thermal collector," Renewable Energy, Elsevier, vol. 30(7), pages 1031-1054.
    28. Sharma, Atul & Tyagi, V.V. & Chen, C.R. & Buddhi, D., 2009. "Review on thermal energy storage with phase change materials and applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(2), pages 318-345, February.
    29. Serik Tokbolat & Farnush Nazipov & Jong R. Kim & Ferhat Karaca, 2019. "Evaluation of the Environmental Performance of Residential Building Envelope Components," Energies, MDPI, vol. 13(1), pages 1-10, December.
    30. Elisabetta Palumbo, 2021. "Effect of LCA Data Sources on GBRS Reference Values: The Envelope of an Italian Passive House," Energies, MDPI, vol. 14(7), pages 1-16, March.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. K. Chopra & V. V. Tyagi & Sudhir Kumar Pathak & Apaar Khajuria & A. K. Pandey & Nazaruddin Abd Rahman & Muhamad Mansor & Ahmet Sari, 2023. "Impact of Stearic Acid as Heat Storage Material on Energy Efficiency and Economic Feasibility of a Vacuum Tube Solar Water Heater," Energies, MDPI, vol. 16(11), pages 1-18, May.
    2. Łukasz Amanowicz, 2021. "Peak Power of Heat Source for Domestic Hot Water Preparation (DHW) for Residential Estate in Poland as a Representative Case Study for the Climate of Central Europe," Energies, MDPI, vol. 14(23), pages 1-15, December.
    3. Chopra, K. & Tyagi, V.V. & Pandey, A.K. & Popli, Sakshi & Singh, Gurjeet & Sharma, R.K. & Sari, Ahmet, 2022. "Effect of simultaneous & consecutive melting/solidification of phase change material on domestic solar water heating system," Renewable Energy, Elsevier, vol. 188(C), pages 329-348.
    4. Colarossi, Daniele & Tagliolini, Eleonora & Amato, Alessia & Principi, Paolo, 2022. "Life cycle assessment and circularity evaluation of a PV panel integrated with phase change material," Renewable Energy, Elsevier, vol. 201(P2), pages 150-156.
    5. Michał Turski & Agnieszka Jachura, 2022. "Life Cycle Assessment of Dispersed Phase Change Material Heat Accumulators for Cooperation with Buildings in the District Heating System," Energies, MDPI, vol. 15(16), pages 1-24, August.
    6. Izabela Samson-Bręk & Marlena Owczuk & Anna Matuszewska & Krzysztof Biernat, 2022. "Environmental Assessment of the Life Cycle of Electricity Generation from Biogas in Polish Conditions," Energies, MDPI, vol. 15(15), pages 1-22, August.
    7. Nektarios Arnaoutakis & Andreas P. Vouros & Maria Milousi & Yannis G. Caouris & Giorgos Panaras & Antonios Tourlidakis & Kyriakos Vafiadis & Giouli Mihalakakou & Christos S. Garoufalis & Zacharias Fro, 2022. "Design, Energy, Environmental and Cost Analysis of an Integrated Collector Storage Solar Water Heater Based on Multi-Criteria Methodology," Energies, MDPI, vol. 15(5), pages 1-21, February.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Motte, F. & Notton, G. & Lamnatou, Chr & Cristofari, C. & Chemisana, D., 2019. "Numerical study of PCM integration impact on overall performances of a highly building-integrated solar collector," Renewable Energy, Elsevier, vol. 137(C), pages 10-19.
    2. Nektarios Arnaoutakis & Andreas P. Vouros & Maria Milousi & Yannis G. Caouris & Giorgos Panaras & Antonios Tourlidakis & Kyriakos Vafiadis & Giouli Mihalakakou & Christos S. Garoufalis & Zacharias Fro, 2022. "Design, Energy, Environmental and Cost Analysis of an Integrated Collector Storage Solar Water Heater Based on Multi-Criteria Methodology," Energies, MDPI, vol. 15(5), pages 1-21, February.
    3. Greening, Benjamin & Azapagic, Adisa, 2014. "Domestic solar thermal water heating: A sustainable option for the UK?," Renewable Energy, Elsevier, vol. 63(C), pages 23-36.
    4. Esteban Zalamea-Leon & Edgar A. Barragán-Escandón & John Calle-Sigüencia & Mateo Astudillo-Flores & Diego Juela-Quintuña, 2021. "Residential Solar Thermal Performance Considering Self-Shading Incidence between Tubes in Evacuated Tube and Flat Plate Collectors," Sustainability, MDPI, vol. 13(24), pages 1-17, December.
    5. Nikolic, D. & Skerlic, J. & Radulovic, J. & Miskovic, A. & Tamasauskas, R. & Sadauskienė, J., 2022. "Exergy efficiency optimization of photovoltaic and solar collectors’ area in buildings with different heating systems," Renewable Energy, Elsevier, vol. 189(C), pages 1063-1073.
    6. Lamnatou, Chr. & Chemisana, D. & Mateus, R. & Almeida, M.G. & Silva, S.M., 2015. "Review and perspectives on Life Cycle Analysis of solar technologies with emphasis on building-integrated solar thermal systems," Renewable Energy, Elsevier, vol. 75(C), pages 833-846.
    7. Allen, S.R. & Hammond, G.P. & Harajli, H.A. & McManus, M.C. & Winnett, A.B., 2010. "Integrated appraisal of a Solar Hot Water system," Energy, Elsevier, vol. 35(3), pages 1351-1362.
    8. Martínez, E. & Jiménez, E. & Blanco, J. & Sanz, F., 2010. "LCA sensitivity analysis of a multi-megawatt wind turbine," Applied Energy, Elsevier, vol. 87(7), pages 2293-2303, July.
    9. Soares, N. & Bastos, J. & Pereira, L. Dias & Soares, A. & Amaral, A.R. & Asadi, E. & Rodrigues, E. & Lamas, F.B. & Monteiro, H. & Lopes, M.A.R. & Gaspar, A.R., 2017. "A review on current advances in the energy and environmental performance of buildings towards a more sustainable built environment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 845-860.
    10. Bouadila, Salwa & Lazaar, Mariem & Skouri, Safa & Kooli, Sami & Farhat, Abdelhamid, 2014. "Assessment of the greenhouse climate with a new packed-bed solar air heater at night, in Tunisia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 35(C), pages 31-41.
    11. Bany Mousa, Osama & Kara, Sami & Taylor, Robert A., 2019. "Comparative energy and greenhouse gas assessment of industrial rooftop-integrated PV and solar thermal collectors," Applied Energy, Elsevier, vol. 241(C), pages 113-123.
    12. Chopra, K. & Tyagi, V.V. & Pandey, A.K. & Sari, Ahmet, 2018. "Global advancement on experimental and thermal analysis of evacuated tube collector with and without heat pipe systems and possible applications," Applied Energy, Elsevier, vol. 228(C), pages 351-389.
    13. Kahwaji, Samer & Johnson, Michel B. & Kheirabadi, Ali C. & Groulx, Dominic & White, Mary Anne, 2018. "A comprehensive study of properties of paraffin phase change materials for solar thermal energy storage and thermal management applications," Energy, Elsevier, vol. 162(C), pages 1169-1182.
    14. Martínez, E. & Sanz, F. & Pellegrini, S. & Jiménez, E. & Blanco, J., 2009. "Life cycle assessment of a multi-megawatt wind turbine," Renewable Energy, Elsevier, vol. 34(3), pages 667-673.
    15. Lamnatou, Chr. & Mondol, J.D. & Chemisana, D. & Maurer, C., 2015. "Modelling and simulation of Building-Integrated solar thermal systems: Behaviour of the coupled building/system configuration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 48(C), pages 178-191.
    16. Mingli Li & Guoqing Gui & Zhibin Lin & Long Jiang & Hong Pan & Xingyu Wang, 2018. "Numerical Thermal Characterization and Performance Metrics of Building Envelopes Containing Phase Change Materials for Energy-Efficient Buildings," Sustainability, MDPI, vol. 10(8), pages 1-23, July.
    17. Lukas Hegner & Stefan Krimmel & Rebecca Ravotti & Dominic Festini & Jörg Worlitschek & Anastasia Stamatiou, 2021. "Experimental Feasibility Study of a Direct Contact Latent Heat Storage Using an Ester as a Bio-Based Storage Material," Energies, MDPI, vol. 14(2), pages 1-26, January.
    18. Gholamibozanjani, Gohar & Farid, Mohammed, 2020. "A comparison between passive and active PCM systems applied to buildings," Renewable Energy, Elsevier, vol. 162(C), pages 112-123.
    19. Tian, Xueyu & You, Fengqi, 2019. "Carbon-neutral hybrid energy systems with deep water source cooling, biomass heating, and geothermal heat and power," Applied Energy, Elsevier, vol. 250(C), pages 413-432.
    20. Carnevale, E. & Lombardi, L. & Zanchi, L., 2014. "Life Cycle Assessment of solar energy systems: Comparison of photovoltaic and water thermal heater at domestic scale," Energy, Elsevier, vol. 77(C), pages 434-446.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:14:p:4146-:d:591661. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.