IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i7p1661-d340738.html
   My bibliography  Save this article

Heat Sink Shape and Topology Optimization with Pareto-Vector Length Optimization for Air Cooling

Author

Listed:
  • Ferenc Szodrai

    (Department of Building Services and Building Engineering, Faculty of Engineering, University of Debrecen, 4028 Debrecen, Hungary)

Abstract

Localized air cooling can be used for various purposes, e.g.: electronic equipment cooling, and air conditioning. The paper emphasizes that the connection between the air-flow and cooling has to fulfill a contradictory requirement (low pressure loss and effective cooling). The cooling and the pressure loss are dependent on the moisture content of the air flow. In the study, heat sink geometries were examined at various fresh air relative humidity, temperature and flowrates with commercially available simulation software (Ansys Fluent). The most favorable option was chosen by Pareto-vector length optimization. For optimization, head loss coefficient and temperature coefficient were used. Firstly, 108 cases were made to evaluate the sensitivity of the optimization parameters. Secondly, on 40 finned heat sinks with different fin width and quantity optimization were made. Thirdly, a prototype was made from the favorite solution where the performance was evaluated. For the measurement two type: TEC1-12706 thermoelectric cooling devices (TEC) were used for cooling. The difference between the measured and the modelled cooled air temperatures was 3%.

Suggested Citation

  • Ferenc Szodrai, 2020. "Heat Sink Shape and Topology Optimization with Pareto-Vector Length Optimization for Air Cooling," Energies, MDPI, vol. 13(7), pages 1-15, April.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:7:p:1661-:d:340738
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/7/1661/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/7/1661/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Zhe Xu & Yingqing Guo & Huarui Yang & Haotian Mao & Zongling Yu & Rui Li, 2020. "One Convenient Method to Calculate Performance and Optimize Configuration for Annular Radiator Using Heat Transfer Unit Simulation," Energies, MDPI, vol. 13(1), pages 1-19, January.
    2. Jiawei Ye & Wei Zeng & Zhigao Zhao & Jiebin Yang & Jiandong Yang, 2020. "Optimization of Pump Turbine Closing Operation to Minimize Water Hammer and Pulsating Pressures During Load Rejection," Energies, MDPI, vol. 13(4), pages 1-18, February.
    3. Pengxiang Song & Yulong Lei & Yao Fu, 2020. "Multi-Objective Optimization and Matching of Power Source for PHEV Based on Genetic Algorithm," Energies, MDPI, vol. 13(5), pages 1-20, March.
    4. Dan A. Iancu & Nikolaos Trichakis, 2014. "Pareto Efficiency in Robust Optimization," Management Science, INFORMS, vol. 60(1), pages 130-147, January.
    5. Mohammed Al-Azba & Zhaohui Cen & Yves Remond & Said Ahzi, 2020. "An Optimal Air-Conditioner On-Off Control Scheme under Extremely Hot Weather Conditions," Energies, MDPI, vol. 13(5), pages 1-21, February.
    6. Yuta Susowake & Hasan Masrur & Tetsuya Yabiku & Tomonobu Senjyu & Abdul Motin Howlader & Mamdouh Abdel-Akher & Ashraf M. Hemeida, 2019. "A Multi-Objective Optimization Approach towards a Proposed Smart Apartment with Demand-Response in Japan," Energies, MDPI, vol. 13(1), pages 1-14, December.
    7. Joas, Fabian & Pahle, Michael & Flachsland, Christian & Joas, Amani, 2016. "Which goals are driving the Energiewende? Making sense of the German Energy Transformation," Energy Policy, Elsevier, vol. 95(C), pages 42-51.
    8. Hui, Hongxun & Ding, Yi & Liu, Weidong & Lin, You & Song, Yonghua, 2017. "Operating reserve evaluation of aggregated air conditioners," Applied Energy, Elsevier, vol. 196(C), pages 218-228.
    9. Jochen Conrad & Simon Greif, 2019. "Modelling Load Profiles of Heat Pumps," Energies, MDPI, vol. 12(4), pages 1-11, February.
    10. He, Wei & Wang, Shixue & Yue, Like, 2017. "High net power output analysis with changes in exhaust temperature in a thermoelectric generator system," Applied Energy, Elsevier, vol. 196(C), pages 259-267.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Aidan Robinson & Prodip K. Das, 2022. "Biomimetic and Constructal Design of Alveolus-Inspired Extended Surfaces for Heat Dispersion," Energies, MDPI, vol. 16(1), pages 1-16, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tobias Hübner, 2020. "Small-Scale Modelling of Individual Greenhouse Gas Abatement Measures in Industry," Energies, MDPI, vol. 13(7), pages 1-43, April.
    2. Olatz Azurza-Zubizarreta & Izaro Basurko-PerezdeArenaza & Eñaut Zelarain & Estitxu Villamor & Ortzi Akizu-Gardoki & Unai Villena-Camarero & Alvaro Campos-Celador & Iñaki Barcena-Hinojal, 2021. "Urban Energy Transitions in Europe, towards Low-Socio-Environmental Impact Cities," Sustainability, MDPI, vol. 13(21), pages 1-29, October.
    3. Yassine Chemingui & Adel Gastli & Omar Ellabban, 2020. "Reinforcement Learning-Based School Energy Management System," Energies, MDPI, vol. 13(23), pages 1-21, December.
    4. Aljaghtham, Mutabe & Celik, Emrah, 2020. "Design optimization of oil pan thermoelectric generator to recover waste heat from internal combustion engines," Energy, Elsevier, vol. 200(C).
    5. Dehler-Holland, Joris & Schumacher, Kira & Fichtner, Wolf, 2021. "Topic Modeling Uncovers Shifts in Media Framing of the German Renewable Energy Act," EconStor Open Access Articles and Book Chapters, ZBW - Leibniz Information Centre for Economics, vol. 2(1).
    6. Ahmad, Tanveer & Chen, Huanxin, 2019. "Deep learning for multi-scale smart energy forecasting," Energy, Elsevier, vol. 175(C), pages 98-112.
    7. Shan, Kui & Wang, Shengwei, 2017. "Energy efficient design and control of cleanroom environment control systems in subtropical regions – A comparative analysis and on-site validation," Applied Energy, Elsevier, vol. 204(C), pages 582-595.
    8. Krzysztof Nowak & Sławomir Rabczak, 2020. "Technical and Economic Analysis of the External Surface Heating System on the Example of a Car Park," Energies, MDPI, vol. 13(24), pages 1-15, December.
    9. Groh, Elke D. & Möllendorff, Charlotte v., 2020. "What shapes the support of renewable energy expansion? Public attitudes between policy goals and risk, time, and social preferences," Energy Policy, Elsevier, vol. 137(C).
    10. Huang, Bin & Shen, Zu-Guo, 2022. "Performance assessment of annular thermoelectric generators for automobile exhaust waste heat recovery," Energy, Elsevier, vol. 246(C).
    11. Aliakbari Sani, Sajad & Bahn, Olivier & Delage, Erick, 2022. "Affine decision rule approximation to address demand response uncertainty in smart Grids’ capacity planning," European Journal of Operational Research, Elsevier, vol. 303(1), pages 438-455.
    12. He, Xianghui & Yang, Jiandong & Yang, Jiebin & Zhao, Zhigao & Hu, Jinhong & Peng, Tao, 2023. "Evolution mechanism of water column separation in pump turbine: Model experiment and occurrence criterion," Energy, Elsevier, vol. 265(C).
    13. Asimit, Alexandru V. & Bignozzi, Valeria & Cheung, Ka Chun & Hu, Junlei & Kim, Eun-Seok, 2017. "Robust and Pareto optimality of insurance contracts," European Journal of Operational Research, Elsevier, vol. 262(2), pages 720-732.
    14. Leipprand, Anna & Flachsland, Christian & Pahle, Michael, 2017. "Advocates or cartographers? Scientific advisors and the narratives of German energy transition," Energy Policy, Elsevier, vol. 102(C), pages 222-236.
    15. Alexander Engau, 2017. "Proper Efficiency and Tradeoffs in Multiple Criteria and Stochastic Optimization," Mathematics of Operations Research, INFORMS, vol. 42(1), pages 119-134, January.
    16. Henni, Sarah & Staudt, Philipp & Kandiah, Balendra & Weinhardt, Christof, 2021. "Infrastructural coupling of the electricity and gas distribution grid to reduce renewable energy curtailment," Applied Energy, Elsevier, vol. 288(C).
    17. Jonglak Pahasa & Potejanasak Potejana & Issarachai Ngamroo, 2021. "Multi-Objective Decentralized Model Predictive Control for Inverter Air Conditioner Control of Indoor Temperature and Frequency Stabilization in Microgrid," Energies, MDPI, vol. 14(21), pages 1-22, October.
    18. Liu, Baonan & Zhou, Jianzhong & Xu, Yanhe & Lai, Xinjie & Shi, Yousong & Li, Mengyao, 2022. "An optimization decision-making framework for the optimal operation strategy of pumped storage hydropower system under extreme conditions," Renewable Energy, Elsevier, vol. 182(C), pages 254-273.
    19. Martí Comamala & Ivan Ruiz Cózar & Albert Massaguer & Eduard Massaguer & Toni Pujol, 2018. "Effects of Design Parameters on Fuel Economy and Output Power in an Automotive Thermoelectric Generator," Energies, MDPI, vol. 11(12), pages 1-28, November.
    20. Young Hoo Cho & Jaehyun Park & Naehyuck Chang & Jaemin Kim, 2020. "Comparison of Cooling Methods for a Thermoelectric Generator with Forced Convection," Energies, MDPI, vol. 13(12), pages 1-19, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:7:p:1661-:d:340738. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.