IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i1p189-d304057.html
   My bibliography  Save this article

Turbulent Flame Geometry Measurements in a Mass-Production Gasoline Direct Injection Engine

Author

Listed:
  • Manfredi Villani

    (Department of Mechanical Engineering, University Niccolò Cusano, via Don Carlo Gnocchi 3, 00166 Rome, Italy)

  • Phillip Aquino

    (Honda R&D Americas Inc., Raymond, OH 43067, USA)

Abstract

Direct optical access to the combustion chamber of a gasoline direct injection (GDI) engine provides extremely valuable information about the combustion process. Experimental measurements of the geometric characteristics of the turbulent flame—such as the flame radius, flame center, flame edges and flame brush thickness—are of fundamental interest in support of the development and validation of any combustion model. To determine the macroscopic properties of sprays and flames, visualization and digital image processing techniques are typically used in controlled experimental setups like single-cylinder optical engines or closed vessels, while optical measurements on mass-production engines are more uncommon. In this paper the optical experimental setup (consisting of a high-speed camera, a laser light source and a data acquisition system) used to characterize the planar turbulent flame propagation in the cylinder of a 3.5 L GDI V6 mass-production engine, is described. The image acquisition process and the image processing that is necessary to evaluate the geometric characteristics of the propagating flame front, which are usually omitted in the referenced literature, are reported in detail to provide a useful guideline to other researchers. The results show that the step-by-step algorithm and the calculation formulae proposed allow to retrieve clear visualizations of the propagating flame front and measurements of its geometrical properties.

Suggested Citation

  • Manfredi Villani & Phillip Aquino, 2020. "Turbulent Flame Geometry Measurements in a Mass-Production Gasoline Direct Injection Engine," Energies, MDPI, vol. 13(1), pages 1-23, January.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:1:p:189-:d:304057
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/1/189/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/1/189/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Hua Tian & Jingchen Cui & Tianhao Yang & Yao Fu & Jiangping Tian & Wuqiang Long, 2019. "Experimental Research on Controllability and Emissions of Jet-Controlled Compression Ignition Engine," Energies, MDPI, vol. 12(15), pages 1-14, July.
    2. S.D. Martinez-Boggio & S.S. Merola & P. Teixeira Lacava & A. Irimescu & P.L. Curto-Risso, 2019. "Effect of Fuel and Air Dilution on Syngas Combustion in an Optical SI Engine," Energies, MDPI, vol. 12(8), pages 1-23, April.
    3. Santiago Martinez & Adrian Irimescu & Simona Silvia Merola & Pedro Lacava & Pedro Curto-Riso, 2017. "Flame Front Propagation in an Optical GDI Engine under Stoichiometric and Lean Burn Conditions," Energies, MDPI, vol. 10(9), pages 1-23, September.
    4. Yuh-Yih Wu & James H. Wang & Faizan Mushtaq Mir, 2018. "Improving the Thermal Efficiency of the Homogeneous Charge Compression Ignition Engine by Using Various Combustion Patterns," Energies, MDPI, vol. 11(11), pages 1-20, November.
    5. Merola, Simona Silvia & Tornatore, Cinzia & Irimescu, Adrian & Marchitto, Luca & Valentino, Gerardo, 2016. "Optical diagnostics of early flame development in a DISI (direct injection spark ignition) engine fueled with n-butanol and gasoline," Energy, Elsevier, vol. 108(C), pages 50-62.
    6. Catapano, Francesco & Sementa, Paolo & Vaglieco, Bianca Maria, 2016. "Air-fuel mixing and combustion behavior of gasoline-ethanol blends in a GDI wall-guided turbocharged multi-cylinder optical engine," Renewable Energy, Elsevier, vol. 96(PA), pages 319-332.
    7. M. Mofijur & M.M. Hasan & T.M.I. Mahlia & S.M. Ashrafur Rahman & A.S. Silitonga & Hwai Chyuan Ong, 2019. "Performance and Emission Parameters of Homogeneous Charge Compression Ignition (HCCI) Engine: A Review," Energies, MDPI, vol. 12(18), pages 1-21, September.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. S.D. Martinez-Boggio & S.S. Merola & P. Teixeira Lacava & A. Irimescu & P.L. Curto-Risso, 2019. "Effect of Fuel and Air Dilution on Syngas Combustion in an Optical SI Engine," Energies, MDPI, vol. 12(8), pages 1-23, April.
    2. Antonio Lecuona & José I. Nogueira & Antonio Famiglietti, 2021. "Open Dual Cycle with Composition Change and Limited Pressure for Prediction of Miller Engines Performance and Its Turbine Temperature," Energies, MDPI, vol. 14(10), pages 1-25, May.
    3. Abd Rashid Abd Aziz & Yohannes Tamirat Anbese & Ftwi Yohaness Hagos & Morgan R. Heikal & Firmansyah, 2017. "Characteristics of Early Flame Development in a Direct-Injection Spark-Ignition CNG Engine Fitted with a Variable Swirl Control Valve," Energies, MDPI, vol. 10(7), pages 1-16, July.
    4. Mahlia, T.M.I. & Syazmi, Z.A.H.S. & Mofijur, M. & Abas, A.E. Pg & Bilad, M.R. & Ong, Hwai Chyuan & Silitonga, A.S., 2020. "Patent landscape review on biodiesel production: Technology updates," Renewable and Sustainable Energy Reviews, Elsevier, vol. 118(C).
    5. Goel, Varun & Kumar, Naresh & Singh, Paramvir, 2018. "Impact of modified parameters on diesel engine characteristics using biodiesel: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2716-2729.
    6. Israel Reyes-Ramírez & Santiago D. Martínez-Boggio & Pedro L. Curto-Risso & Alejandro Medina & Antonio Calvo Hernández & Lev Guzmán-Vargas, 2018. "Symbolic Analysis of the Cycle-to-Cycle Variability of a Gasoline–Hydrogen Fueled Spark Engine Model," Energies, MDPI, vol. 11(4), pages 1-19, April.
    7. Viktor Dilber & Momir Sjerić & Rudolf Tomić & Josip Krajnović & Sara Ugrinić & Darko Kozarac, 2022. "Optimization of Pre-Chamber Geometry and Operating Parameters in a Turbulent Jet Ignition Engine," Energies, MDPI, vol. 15(13), pages 1-21, June.
    8. Duan, Xiongbo & Li, Yangyang & Liu, Jingping & Guo, Genmiao & Fu, Jianqin & Zhang, Quanchang & Zhang, Shiheng & Liu, Weiqiang, 2019. "Experimental study the effects of various compression ratios and spark timing on performance and emission of a lean-burn heavy-duty spark ignition engine fueled with methane gas and hydrogen blends," Energy, Elsevier, vol. 169(C), pages 558-571.
    9. Moradi, Jamshid & Gharehghani, Ayat & Mirsalim, Mostafa, 2020. "Numerical investigation on the effect of oxygen in combustion characteristics and to extend low load operating range of a natural-gas HCCI engine," Applied Energy, Elsevier, vol. 276(C).
    10. Zhang, Mengzhu & Ge, Yunshan & Wang, Xin & Xu, Hongming & Tan, Jianwei & Hao, Lijun, 2021. "Effects of ethanol and aromatic compositions on regulated and unregulated emissions of E10-fuelled China-6 compliant gasoline direct injection vehicles," Renewable Energy, Elsevier, vol. 176(C), pages 322-333.
    11. Ji, Changwei & Shi, Lei & Wang, Shuofeng & Cong, Xiaoyu & Su, Teng & Yu, Menghui, 2017. "Investigation on performance of a spark-ignition engine fueled with dimethyl ether and gasoline mixtures under idle and stoichiometric conditions," Energy, Elsevier, vol. 126(C), pages 335-342.
    12. Rakopoulos, Constantine D. & Rakopoulos, Dimitrios C. & Kosmadakis, George M. & Papagiannakis, Roussos G., 2019. "Experimental comparative assessment of butanol or ethanol diesel-fuel extenders impact on combustion features, cyclic irregularity, and regulated emissions balance in heavy-duty diesel engine," Energy, Elsevier, vol. 174(C), pages 1145-1157.
    13. Tian, Zhi & Zhen, Xudong & Wang, Yang & Liu, Daming & Li, Xiaoyan, 2020. "Combustion and emission characteristics of n-butanol-gasoline blends in SI direct injection gasoline engine," Renewable Energy, Elsevier, vol. 146(C), pages 267-279.
    14. Serdar Halis & Hamit Solmaz & Seyfi Polat & H. Serdar Yücesu, 2023. "Numerical Investigation of a Reactivity-Controlled Compression Ignition Engine Fueled with N-Heptane and Iso-Octane," Sustainability, MDPI, vol. 15(13), pages 1-17, July.
    15. Anmol Singh Kshatriya & Prabhatkumar Tiwari & Sreekanth M & T. M. Yunus Khan & Shaik Dawood Abdul Khadar & Mohamed Mansour & Feroskhan M, 2022. "Investigations into the Combined Effect of Mahua Biodiesel Blends and Biogas in a Dual Fuel Engine," Energies, MDPI, vol. 15(6), pages 1-15, March.
    16. Giovanni Cecere & Adrian Irimescu & Simona Silvia Merola & Luciano Rolando & Federico Millo, 2022. "Lean Burn Flame Kernel Characterization for Different Spark Plug Designs and Orientations in an Optical GDI Engine," Energies, MDPI, vol. 15(9), pages 1-17, May.
    17. Liu, Zengbin & Zhen, Xudong & Tian, Zhi & Liu, Daming & Wang, Yang, 2024. "Study on the effect of injection strategy on the combustion and emission characteristics of direct injection spark ignition bio-butanol engine," Energy, Elsevier, vol. 289(C).
    18. Liu, Xinghua & Ma, Yue & Li, Shuyuan & Yan, Hua & Wang, Daxi & Luo, Yongfeng, 2019. "Study of the reaction mechanism of aluminum based composite fuel and chlorine trifluoride oxide," Energy, Elsevier, vol. 168(C), pages 393-399.
    19. Zhen, Xudong & Wang, Yang & Liu, Daming, 2020. "Bio-butanol as a new generation of clean alternative fuel for SI (spark ignition) and CI (compression ignition) engines," Renewable Energy, Elsevier, vol. 147(P1), pages 2494-2521.
    20. Stefan Posch & Clemens Gößnitzer & Andreas B. Ofner & Gerhard Pirker & Andreas Wimmer, 2022. "Modeling Cycle-to-Cycle Variations of a Spark-Ignited Gas Engine Using Artificial Flow Fields Generated by a Variational Autoencoder," Energies, MDPI, vol. 15(7), pages 1-16, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:1:p:189-:d:304057. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.