IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v12y2019i8p1538-d225341.html
   My bibliography  Save this article

Experimental Study on Fast and Energy-Efficient Direct Driven Hydraulic Actuator Unit

Author

Listed:
  • Teemu Koitto

    (Department of Mechanical Engineering, Aalto University, 02150 Espoo, Finland)

  • Heikki Kauranne

    (Fiellberg Oy, FI-01720 Vantaa, Finland)

  • Olof Calonius

    (Department of Mechanical Engineering, Aalto University, 02150 Espoo, Finland)

  • Tatiana Minav

    (Department of Mechanical Engineering, Aalto University, 02150 Espoo, Finland)

  • Matti Pietola

    (Department of Mechanical Engineering, Aalto University, 02150 Espoo, Finland)

Abstract

In this experimental study, a Direct Driven Hydraulics (DDH) system of the closed circuit type was utilized for cyclic vertical actuation in heavy load material handling. The actuator was controlled by a speed-controlled fixed displacement pump. The high energy saving potential of this system has been demonstrated in previous studies by the authors, but the dynamic characteristics of the ramped and P-controlled base system were considered unsatisfactory. Therefore, the system was implemented with an open-loop S-curve control that utilized a pre-calculated RPM (revolutions per minute) profile for the electric motor in order to realize a smooth actuator and load transition as a function of time. The results indicate that S-curve control is exceptionally well suited for producing a controlled lifting–lowering rapid motion with a heavy load, while still keeping the actuator chamber pressures within acceptable limits. In comparison, the motion produced by P-control was characterized by large unwanted pressure peaks together with velocity fluctuations and vibrations at the end of the stroke. Using a combination of S-curve control and hydraulic load compensation, a mass of 1325 kg could be moved 0.26 m in less than 0.5 s. The load compensation reduced the energy consumption by 64%, which would allow downsizing the electric motor and enable cost-efficient DDH implementation.

Suggested Citation

  • Teemu Koitto & Heikki Kauranne & Olof Calonius & Tatiana Minav & Matti Pietola, 2019. "Experimental Study on Fast and Energy-Efficient Direct Driven Hydraulic Actuator Unit," Energies, MDPI, vol. 12(8), pages 1-17, April.
    • Handle: RePEc:gam:jeners:v:12:y:2019:i:8:p:1538-:d:225341
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/12/8/1538/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/12/8/1538/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Quan, Zhongyi & Quan, Long & Zhang, Jinman, 2014. "Review of energy efficient direct pump controlled cylinder electro-hydraulic technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 35(C), pages 336-346.
    2. Damiano Padovani & Søren Ketelsen & Daniel Hagen & Lasse Schmidt, 2019. "A Self-Contained Electro-Hydraulic Cylinder with Passive Load-Holding Capability," Energies, MDPI, vol. 12(2), pages 1-21, January.
    3. Abinab Niraula & Shuzhong Zhang & Tatiana Minav & Matti Pietola, 2018. "Effect of Zonal Hydraulics on Energy Consumption and Boom Structure of a Micro-Excavator," Energies, MDPI, vol. 11(8), pages 1-22, August.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lukasz Stawinski & Jakub Zaczynski & Adrian Morawiec & Justyna Skowronska & Andrzej Kosucki, 2021. "Energy Consumption Structure and Its Improvement of Low-Lifting Capacity Scissor Lift," Energies, MDPI, vol. 14(5), pages 1-14, March.
    2. Mustafa Karamuk & Orhan Behic Alankus, 2023. "Direct Tilt Controller Design with Disturbance Compensation and Implementation for a Narrow Tilting Electric Vehicle," Energies, MDPI, vol. 16(15), pages 1-28, July.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Søren Ketelsen & Damiano Padovani & Torben O. Andersen & Morten Kjeld Ebbesen & Lasse Schmidt, 2019. "Classification and Review of Pump-Controlled Differential Cylinder Drives," Energies, MDPI, vol. 12(7), pages 1-27, April.
    2. Paolo Casoli & Fabio Scolari & Carlo Maria Vescovini & Massimo Rundo, 2022. "Energy Comparison between a Load Sensing System and Electro-Hydraulic Solutions Applied to a 9-Ton Excavator," Energies, MDPI, vol. 15(7), pages 1-15, April.
    3. Chen, Qihuai & Lin, Tianliang & Ren, Haoling & Fu, Shengjie, 2019. "Novel potential energy regeneration systems for hybrid hydraulic excavators," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 163(C), pages 130-145.
    4. Wang, Feng & Wu, Jiaming & Lin, Zichang & Zhang, Haoxiang & Xu, Bing, 2023. "A power-sharing electro-hydraulic actuator system to downsize electric motors for electric mobile machines," Energy, Elsevier, vol. 284(C).
    5. Konrad Johan Jensen & Morten Kjeld Ebbesen & Michael Rygaard Hansen, 2021. "Novel Concept for Electro-Hydrostatic Actuators for Motion Control of Hydraulic Manipulators," Energies, MDPI, vol. 14(20), pages 1-27, October.
    6. Lin, Tianliang & Chen, Qiang & Ren, Haoling & Huang, Weiping & Chen, Qihuai & Fu, Shengjie, 2017. "Review of boom potential energy regeneration technology for hydraulic construction machinery," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 358-371.
    7. Xiangyang Li & Yiting Xi & Dunhui Xiao & Jiaxin Tao, 2021. "Valve Plate Structural Optimal Design and Flow Field Analysis for the Aviation Bidirectional Three-Port Piston Pump," Energies, MDPI, vol. 14(11), pages 1-14, June.
    8. Wang, He & Chen, Zhen & Huang, Jiahai, 2021. "Improvement of vibration frequency and energy efficiency in the uniaxial electro-hydraulic shaking tables for sinusoidal vibration waveform," Energy, Elsevier, vol. 218(C).
    9. Wu, Wei & Hu, Jibin & Yuan, Shihua & Di, Chongfeng, 2016. "A hydraulic hybrid propulsion method for automobiles with self-adaptive system," Energy, Elsevier, vol. 114(C), pages 683-692.
    10. Qu, Shaoyang & Fassbender, David & Vacca, Andrea & Busquets, Enrique, 2021. "A high-efficient solution for electro-hydraulic actuators with energy regeneration capability," Energy, Elsevier, vol. 216(C).
    11. Lasse Schmidt & Kenneth Vorbøl Hansen, 2022. "Electro-Hydraulic Variable-Speed Drive Networks—Idea, Perspectives, and Energy Saving Potentials," Energies, MDPI, vol. 15(3), pages 1-33, February.
    12. Pugi, L. & Pagliai, M. & Nocentini, A. & Lutzemberger, G. & Pretto, A., 2017. "Design of a hydraulic servo-actuation fed by a regenerative braking system," Applied Energy, Elsevier, vol. 187(C), pages 96-115.
    13. Lukasz Stawinski & Justyna Skowronska & Andrzej Kosucki, 2021. "Energy Efficiency and Limitations of the Methods of Controlling the Hydraulic Cylinder Piston Rod under Various Load Conditions," Energies, MDPI, vol. 14(23), pages 1-20, November.
    14. Jun-hui Zhang & Gan Liu & Ruqi Ding & Kun Zhang & Min Pan & Shihao Liu, 2019. "3D Printing for Energy-Saving: Evidence from Hydraulic Manifolds Design," Energies, MDPI, vol. 12(13), pages 1-21, June.
    15. Lasse Schmidt & Søren Ketelsen & Morten Helms Brask & Kasper Aastrup Mortensen, 2019. "A Class of Energy Efficient Self-Contained Electro-Hydraulic Drives with Self-Locking Capability," Energies, MDPI, vol. 12(10), pages 1-26, May.
    16. Søren Ketelsen & Sebastian Michel & Torben O. Andersen & Morten Kjeld Ebbesen & Jürgen Weber & Lasse Schmidt, 2021. "Thermo-Hydraulic Modelling and Experimental Validation of an Electro-Hydraulic Compact Drive," Energies, MDPI, vol. 14(9), pages 1-29, April.
    17. Mingkun Yang & Xianhang Liu & Guishan Yan & Chao Ai & Cong Yu, 2024. "Research on Variable Speed Variable Displacement Power Unit with High Efficiency and High Dynamic Optimized Matching," Energies, MDPI, vol. 17(13), pages 1-22, July.
    18. Xuefei Li & Chao Duan & Kun Bai & Zongwei Yao, 2021. "Operating Performance of Pure Electric Loaders with Different Types of Motors Based on Simulation Analysis," Energies, MDPI, vol. 14(3), pages 1-19, January.
    19. Damiano Padovani & Søren Ketelsen & Daniel Hagen & Lasse Schmidt, 2019. "A Self-Contained Electro-Hydraulic Cylinder with Passive Load-Holding Capability," Energies, MDPI, vol. 12(2), pages 1-21, January.
    20. Juraj Benić & Juraj Karlušić & Željko Šitum & Mihael Cipek & Danijel Pavković, 2022. "Direct Driven Hydraulic System for Skidders," Energies, MDPI, vol. 15(7), pages 1-13, March.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:12:y:2019:i:8:p:1538-:d:225341. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.