IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v75y2017icp157-167.html
   My bibliography  Save this article

A review of thermal energy storage designs, heat storage materials and cooking performance of solar cookers with heat storage

Author

Listed:
  • Nkhonjera, Lameck
  • Bello-Ochende, Tunde
  • John, Geoffrey
  • King’ondu, Cecil K.

Abstract

This paper discusses the thermal energy storage units, heat storage materials and cooking performance of solar cookers with heat storage surveyed in literature. It is revealed that rectangular and cylindrical containers are widely used in the heat storage devices of the solar cookers. The geometry of the storage units, however, depended on the mode of heat transport into the storage medium and out to the cooking vessel from which, three categories of solar cookers (2-stage, 3-stage, and 4-stage solar cookers) are identified. Furthermore, oils and organic phase change materials dominated in the sensible and latent heat storage units respectively. Additionally, the inclusion of high thermal conductive material into the storage medium was the principal technique used in enhancing effective thermal conductivity. Besides, it is shown that there is no significant difference between the cooking power of cookers equipped with sensible and latent heat storage units. However, the design parameters of the cookers as well as thermal diffusivity of the storage medium greatly influenced the cooking power. The 3-stage cookers outperformed their 2-stage counterparts whereas cookers with cooking vessels integrated to the thermal storage unit outperformed the ones with non-integrated cooking vessels. On the other hand, lower thermal diffusivity of the storage medium increased cooking power in cookers with sensible heat storage but decreased the cooking power in cookers with latent heat storage. Finally, it is shown that the quest for the development of high temperature thermal storage units, and the optimization of the geometry as well as heat transfer characteristics of thermal energy storage units remain the potential areas of research in heat storage for cooking.

Suggested Citation

  • Nkhonjera, Lameck & Bello-Ochende, Tunde & John, Geoffrey & King’ondu, Cecil K., 2017. "A review of thermal energy storage designs, heat storage materials and cooking performance of solar cookers with heat storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 75(C), pages 157-167.
    • Handle: RePEc:eee:rensus:v:75:y:2017:i:c:p:157-167
    DOI: 10.1016/j.rser.2016.10.059
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032116307043
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2016.10.059?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Regin, A. Felix & Solanki, S.C. & Saini, J.S., 2008. "Heat transfer characteristics of thermal energy storage system using PCM capsules: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 12(9), pages 2438-2458, December.
    2. Cabeza, L.F. & Castell, A. & Barreneche, C. & de Gracia, A. & Fernández, A.I., 2011. "Materials used as PCM in thermal energy storage in buildings: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(3), pages 1675-1695, April.
    3. Nandwani, Shyam S., 1996. "Solar cookers--cheap technology with high ecological benefits," Ecological Economics, Elsevier, vol. 17(2), pages 73-81, May.
    4. Sharma, Atul & Chen, C.R. & Murty, V.V.S. & Shukla, Anant, 2009. "Solar cooker with latent heat storage systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(6-7), pages 1599-1605, August.
    5. Muthusivagami, R.M. & Velraj, R. & Sethumadhavan, R., 2010. "Solar cookers with and without thermal storage--A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(2), pages 691-701, February.
    6. Cuce, Erdem & Cuce, Pinar Mert, 2013. "A comprehensive review on solar cookers," Applied Energy, Elsevier, vol. 102(C), pages 1399-1421.
    7. Prasanna, U.R. & Umanand, L., 2011. "Modeling and design of a solar thermal system for hybrid cooking application," Applied Energy, Elsevier, vol. 88(5), pages 1740-1755, May.
    8. Haraksingh, I. & Mc Doom, I.A. & Headley, O.St.C., 1996. "A natural convection flat-plate collector solar cooker with short term storage," Renewable Energy, Elsevier, vol. 9(1), pages 729-732.
    9. Panwar, N.L. & Kaushik, S.C. & Kothari, Surendra, 2012. "State of the art of solar cooking: An overview," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(6), pages 3776-3785.
    10. Domanski, R. & El-Sebaii, A.A. & Jaworski, M., 1995. "Cooking during off-sunshine hours using PCMs as storage media," Energy, Elsevier, vol. 20(7), pages 607-616.
    11. Lecuona, Antonio & Nogueira, José-Ignacio & Ventas, Rubén & Rodríguez-Hidalgo, María-del-Carmen & Legrand, Mathieu, 2013. "Solar cooker of the portable parabolic type incorporating heat storage based on PCM," Applied Energy, Elsevier, vol. 111(C), pages 1136-1146.
    12. Kenisarin, Murat & Mahkamov, Khamid, 2007. "Solar energy storage using phase change materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 11(9), pages 1913-1965, December.
    13. Agyenim, Francis & Hewitt, Neil & Eames, Philip & Smyth, Mervyn, 2010. "A review of materials, heat transfer and phase change problem formulation for latent heat thermal energy storage systems (LHTESS)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(2), pages 615-628, February.
    14. Chen, C.R. & Sharma, Atul & Tyagi, S.K. & Buddhi, D., 2008. "Numerical heat transfer studies of PCMs used in a box-type solar cooker," Renewable Energy, Elsevier, vol. 33(5), pages 1121-1129.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Hu, Nan & Li, Zi-Rui & Xu, Zhe-Wen & Fan, Li-Wu, 2022. "Rapid charging for latent heat thermal energy storage: A state-of-the-art review of close-contact melting," Renewable and Sustainable Energy Reviews, Elsevier, vol. 155(C).
    2. Herez, Amal & Ramadan, Mohamad & Khaled, Mahmoud, 2018. "Review on solar cooker systems: Economic and environmental study for different Lebanese scenarios," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 421-432.
    3. Li, Min & Yan, Dandan & Shi, Junbing, 2022. "Multi-scale simulation study on the heat transfer characteristics of phase-change walls," Energy, Elsevier, vol. 259(C).
    4. Hosseinzadeh, Mohammad & Faezian, Ali & Mirzababaee, Seyyed Mahdi & Zamani, Hosein, 2020. "Parametric analysis and optimization of a portable evacuated tube solar cooker," Energy, Elsevier, vol. 194(C).
    5. Maarten Vanierschot & Ashmore Mawire, 2023. "Heat-Transfer Mechanisms in a Solar Cooking Pot with Thermal Energy Storage," Energies, MDPI, vol. 16(7), pages 1-12, March.
    6. Aramesh, Mohamad & Ghalebani, Mehdi & Kasaeian, Alibakhsh & Zamani, Hosein & Lorenzini, Giulio & Mahian, Omid & Wongwises, Somchai, 2019. "A review of recent advances in solar cooking technology," Renewable Energy, Elsevier, vol. 140(C), pages 419-435.
    7. Fernando Antonanzas-Torres & Ruben Urraca & Camilo Andres Cortes Guerrero & Julio Blanco-Fernandez, 2021. "Solar E-Cooking with Low-Power Solar Home Systems for Sub-Saharan Africa," Sustainability, MDPI, vol. 13(21), pages 1-19, November.
    8. Wu, Yang & Chen, Changzhong & Jia, Yifan & Wu, Jie & Huang, Yong & Wang, Linge, 2018. "Review on electrospun ultrafine phase change fibers (PCFs) for thermal energy storage," Applied Energy, Elsevier, vol. 210(C), pages 167-181.
    9. Denis Okello & Robinson Omony & Karidewa Nyeinga & Jimmy Chaciga, 2022. "Performance Analysis of Thermal Energy Storage System Integrated with a Cooking Unit," Energies, MDPI, vol. 15(23), pages 1-19, November.
    10. Indora, Sunil & Kandpal, Tara C., 2018. "Institutional cooking with solar energy: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 84(C), pages 131-154.
    11. Saxena, Abhishek & Cuce, Erdem & Tiwari, G.N. & Kumar, Avnish, 2020. "Design and thermal performance investigation of a box cooker with flexible solar collector tubes: An experimental research," Energy, Elsevier, vol. 206(C).
    12. Khatri, Rahul & Goyal, Rahul & Sharma, Ravi Kumar, 2021. "Advances in the developments of solar cooker for sustainable development: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    13. M. Mofijur & Teuku Meurah Indra Mahlia & Arridina Susan Silitonga & Hwai Chyuan Ong & Mahyar Silakhori & Muhammad Heikal Hasan & Nandy Putra & S.M. Ashrafur Rahman, 2019. "Phase Change Materials (PCM) for Solar Energy Usages and Storage: An Overview," Energies, MDPI, vol. 12(16), pages 1-20, August.
    14. Tian, Shen & Ma, Jiahui & Shao, Shuangquan & Tian, Qingfeng & Wang, Zhiqiang & Zhang, Zheyu & Hu, Kaiyong, 2024. "Experimental and analytical study on continuous frozen/melting processes of latent thermal energy storage driven by bubble flow," Energy, Elsevier, vol. 290(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Indora, Sunil & Kandpal, Tara C., 2018. "Institutional cooking with solar energy: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 84(C), pages 131-154.
    2. Khatri, Rahul & Goyal, Rahul & Sharma, Ravi Kumar, 2021. "Advances in the developments of solar cooker for sustainable development: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    3. Lecuona, Antonio & Nogueira, José-Ignacio & Ventas, Rubén & Rodríguez-Hidalgo, María-del-Carmen & Legrand, Mathieu, 2013. "Solar cooker of the portable parabolic type incorporating heat storage based on PCM," Applied Energy, Elsevier, vol. 111(C), pages 1136-1146.
    4. Aramesh, Mohamad & Ghalebani, Mehdi & Kasaeian, Alibakhsh & Zamani, Hosein & Lorenzini, Giulio & Mahian, Omid & Wongwises, Somchai, 2019. "A review of recent advances in solar cooking technology," Renewable Energy, Elsevier, vol. 140(C), pages 419-435.
    5. Cuce, Erdem & Cuce, Pinar Mert, 2013. "A comprehensive review on solar cookers," Applied Energy, Elsevier, vol. 102(C), pages 1399-1421.
    6. Ge, Haoshan & Li, Haiyan & Mei, Shengfu & Liu, Jing, 2013. "Low melting point liquid metal as a new class of phase change material: An emerging frontier in energy area," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 331-346.
    7. Herez, Amal & Ramadan, Mohamad & Khaled, Mahmoud, 2018. "Review on solar cooker systems: Economic and environmental study for different Lebanese scenarios," Renewable and Sustainable Energy Reviews, Elsevier, vol. 81(P1), pages 421-432.
    8. Selvaraj Balachandran & Jose Swaminathan, 2022. "Advances in Indoor Cooking Using Solar Energy with Phase Change Material Storage Systems," Energies, MDPI, vol. 15(22), pages 1-32, November.
    9. Kenisarin, Murat & Mahkamov, Khamid, 2016. "Passive thermal control in residential buildings using phase change materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 371-398.
    10. Rostami, Sara & Afrand, Masoud & Shahsavar, Amin & Sheikholeslami, M. & Kalbasi, Rasool & Aghakhani, Saeed & Shadloo, Mostafa Safdari & Oztop, Hakan F., 2020. "A review of melting and freezing processes of PCM/nano-PCM and their application in energy storage," Energy, Elsevier, vol. 211(C).
    11. Kashyap, S. Rahul & Pramanik, Santanu & Ravikrishna, R.V., 2023. "A review of solar, electric and hybrid cookstoves," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    12. Saxena, Abhishek & Varun & Pandey, S.P. & Srivastav, G., 2011. "A thermodynamic review on solar box type cookers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(6), pages 3301-3318, August.
    13. M. Mofijur & Teuku Meurah Indra Mahlia & Arridina Susan Silitonga & Hwai Chyuan Ong & Mahyar Silakhori & Muhammad Heikal Hasan & Nandy Putra & S.M. Ashrafur Rahman, 2019. "Phase Change Materials (PCM) for Solar Energy Usages and Storage: An Overview," Energies, MDPI, vol. 12(16), pages 1-20, August.
    14. Soares, N. & Bastos, J. & Pereira, L. Dias & Soares, A. & Amaral, A.R. & Asadi, E. & Rodrigues, E. & Lamas, F.B. & Monteiro, H. & Lopes, M.A.R. & Gaspar, A.R., 2017. "A review on current advances in the energy and environmental performance of buildings towards a more sustainable built environment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 77(C), pages 845-860.
    15. Memon, Shazim Ali, 2014. "Phase change materials integrated in building walls: A state of the art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 31(C), pages 870-906.
    16. Mahavar, S. & Sengar, N. & Dashora, P., 2017. "Analytical model for electric back-up power estimation of solar box type cookers," Energy, Elsevier, vol. 134(C), pages 871-881.
    17. Dhaidan, Nabeel S. & Khodadadi, J.M., 2015. "Melting and convection of phase change materials in different shape containers: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 43(C), pages 449-477.
    18. Calvet, Nicolas & Py, Xavier & Olivès, Régis & Bédécarrats, Jean-Pierre & Dumas, Jean-Pierre & Jay, Frédéric, 2013. "Enhanced performances of macro-encapsulated phase change materials (PCMs) by intensification of the internal effective thermal conductivity," Energy, Elsevier, vol. 55(C), pages 956-964.
    19. Seddegh, Saeid & Wang, Xiaolin & Henderson, Alan D. & Xing, Ziwen, 2015. "Solar domestic hot water systems using latent heat energy storage medium: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 49(C), pages 517-533.
    20. Cárdenas, Bruno & León, Noel, 2013. "High temperature latent heat thermal energy storage: Phase change materials, design considerations and performance enhancement techniques," Renewable and Sustainable Energy Reviews, Elsevier, vol. 27(C), pages 724-737.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:75:y:2017:i:c:p:157-167. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.