IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v55y2016icp674-686.html
   My bibliography  Save this article

Short overview on the jetting-fountain fluidized bed (JFFB) combustor

Author

Listed:
  • Okasha, Farouk M.

Abstract

The jetting-fountain fluidized bed (JFFB) is a novel configuration for fluidized bed. It is basically a bubbling fluidized bed equipped with a spouted jet in the upper part of the bed. A part of gases is fed through the distributor to fluidize bed solids while the remaining part is fed through a vertical pipe creating a jet-fountain zone. A distinct feature of JFFB different from previous spouted bed configurations is that the jet spout height is independent of the bed height. This feature makes the design more flexible and the flow regimes more extendable. The JFFB is characterized by excellent gas–solids contact that is expected to result in high heat and mass transfer both in bed and freeboard zones.

Suggested Citation

  • Okasha, Farouk M., 2016. "Short overview on the jetting-fountain fluidized bed (JFFB) combustor," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 674-686.
    • Handle: RePEc:eee:rensus:v:55:y:2016:i:c:p:674-686
    DOI: 10.1016/j.rser.2015.11.004
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S136403211501254X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2015.11.004?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Martínez, Juan Daniel & Pineda, Tatiana & López, Juan Pablo & Betancur, Mariluz, 2011. "Assessment of the rice husk lean-combustion in a bubbling fluidized bed for the production of amorphous silica-rich ash," Energy, Elsevier, vol. 36(6), pages 3846-3854.
    2. Kuprianov, Vladimir I. & Kaewklum, Rachadaporn & Chakritthakul, Songpol, 2011. "Effects of operating conditions and fuel properties on emission performance and combustion efficiency of a swirling fluidized-bed combustor fired with a biomass fuel," Energy, Elsevier, vol. 36(4), pages 2038-2048.
    3. Vamvuka, Despina & Sfakiotakis, Stelios & Kotronakis, Manolis, 2012. "Fluidized bed combustion of residues from oranges’ plantations and processing," Renewable Energy, Elsevier, vol. 44(C), pages 231-237.
    4. Jain, Vijay & Groulx, Dominic & Basu, Prabir, 2010. "Study of heat transfer between an over-bed oil burner flame and a fluidized bed during start-up: Determination of the flame to bed convection coefficient," Applied Energy, Elsevier, vol. 87(8), pages 2605-2614, August.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Francesco Miccio & Federica Raganati & Paola Ammendola & Farouk Okasha & Michele Miccio, 2021. "Fluidized Bed Combustion and Gasification of Fossil and Renewable Slurry Fuels," Energies, MDPI, vol. 14(22), pages 1-16, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hung-Ta Wen & Jau-Huai Lu & Mai-Xuan Phuc, 2021. "Applying Artificial Intelligence to Predict the Composition of Syngas Using Rice Husks: A Comparison of Artificial Neural Networks and Gradient Boosting Regression," Energies, MDPI, vol. 14(10), pages 1-18, May.
    2. Hu, Ming-Che & Huang, An-Lei & Wen, Tzai-Hung, 2013. "GIS-based biomass resource utilization for rice straw cofiring in the Taiwanese power market," Energy, Elsevier, vol. 55(C), pages 354-360.
    3. Germán Álvarez-López & Alejandra María Múnera & Juan G. Villegas, 2023. "Multicriteria Decision-Making Tools for the Selection of Biomasses as Supplementary Cementitious Materials," Sustainability, MDPI, vol. 15(13), pages 1-17, June.
    4. Díaz-Ramírez, Maryori & Sebastián, Fernando & Royo, Javier & Rezeau, Adeline, 2012. "Combustion requirements for conversion of ash-rich novel energy crops in a 250 kWth multifuel grate fired system," Energy, Elsevier, vol. 46(1), pages 636-643.
    5. Cong, Kunlin & Zhang, Yanguo & Han, Feng & Li, Qinghai, 2019. "Influence of particle sizes on combustion characteristics of coal particles in oxygen-deficient atmosphere," Energy, Elsevier, vol. 170(C), pages 840-848.
    6. Li, Pin-Wei & Chyang, Chien-Song & Ni, Hung-Wen, 2018. "An experimental study of the effect of nitrogen origin on the formation and reduction of NOx in fluidized-bed combustion," Energy, Elsevier, vol. 154(C), pages 319-327.
    7. Duan, Feng & Liu, Jian & Chyang, Chien-Song & Hu, Chun-Hsuan & Tso, Jim, 2013. "Combustion behavior and pollutant emission characteristics of RDF (refuse derived fuel) and sawdust in a vortexing fluidized bed combustor," Energy, Elsevier, vol. 57(C), pages 421-426.
    8. Guo, Feihong & Liu, Weizhen & He, Yi & Li, Xinjun & Zhang, Houhu, 2024. "Study on the combustion characteristics and pollutant emissions of cold-pressed pellets and pellet powders in fluidized-bed," Renewable Energy, Elsevier, vol. 220(C).
    9. Vamvuka, Despina & Sfakiotakis, Stelios & Kotronakis, Manolis, 2012. "Fluidized bed combustion of residues from oranges’ plantations and processing," Renewable Energy, Elsevier, vol. 44(C), pages 231-237.
    10. Cao, Songshan & Duan, Feng & Zhang, Lihui & Chyang, ChienSong & Yang, ChihYun, 2017. "Application of response surface methodology to determine effects of operational conditions on in-bed combustion fraction in vortexing fluidized-bed combustor using different fuels," Energy, Elsevier, vol. 139(C), pages 862-870.
    11. Vamvuka, Despina & Trikouvertis, Marios & Pentari, Despina & Alevizos, George, 2014. "Evaluation of ashes produced from fluidized bed combustion of residues from oranges' plantations and processing," Renewable Energy, Elsevier, vol. 72(C), pages 336-343.
    12. Garcia, Eduardo & Liu, Hao, 2022. "Ilmenite as alternative bed material for the combustion of coal and biomass blends in a fluidised bed combustor to improve combustion performance and reduce agglomeration tendency," Energy, Elsevier, vol. 239(PA).
    13. Sher, Farooq & Pans, Miguel A. & Afilaka, Daniel T. & Sun, Chenggong & Liu, Hao, 2017. "Experimental investigation of woody and non-woody biomass combustion in a bubbling fluidised bed combustor focusing on gaseous emissions and temperature profiles," Energy, Elsevier, vol. 141(C), pages 2069-2080.
    14. Steven, Soen & Restiawaty, Elvi & Bindar, Yazid, 2021. "Routes for energy and bio-silica production from rice husk: A comprehensive review and emerging prospect," Renewable and Sustainable Energy Reviews, Elsevier, vol. 149(C).
    15. Kim, Young Doo & Yang, Chang Won & Kim, Beom Jong & Kim, Kwang Su & Lee, Jeung Woo & Moon, Ji Hong & Yang, Won & Yu, Tae U & Lee, Uen Do, 2013. "Air-blown gasification of woody biomass in a bubbling fluidized bed gasifier," Applied Energy, Elsevier, vol. 112(C), pages 414-420.
    16. Bessa, Larissa C.B.A. & Ferreira, M.C. & Batista, Eduardo A.C. & Meirelles, Antonio J.A., 2013. "Performance and cost evaluation of a new double-effect integration of multicomponent bioethanol distillation," Energy, Elsevier, vol. 63(C), pages 1-9.
    17. Zhang, Li-hui & Chyang, Chien-Song & Duan, Feng & Li, Pin-Wei & Chen, Sing-Yu, 2016. "Comparison of the thermal behaviors and pollutant emissions of pelletized bamboo combustion in a fluidized bed combustor at different secondary gas injection modes," Energy, Elsevier, vol. 116(P1), pages 306-316.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:55:y:2016:i:c:p:674-686. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.