IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v44y2012icp231-237.html
   My bibliography  Save this article

Fluidized bed combustion of residues from oranges’ plantations and processing

Author

Listed:
  • Vamvuka, Despina
  • Sfakiotakis, Stelios
  • Kotronakis, Manolis

Abstract

Some of the major agricultural residues of Mediterranean countries, orange tree pruning, leaves and peels and their blends, were evaluated for heat production. The experiments were conducted in a lab-scale fluidized bed facility. Temperature distributions along the reactor and flue gas emissions were measured at different excess air ratios, fuel feed rates and fuel mixing ratios. The combustion performance of the residues was studied in terms of emissions and efficiency. The results showed that a higher excess air ratio or feed rate improved combustion efficiency. Flue gas emissions were not significantly affected, when the excess air factor λ varied between 1.4 and 1.7. CO emissions were found to increase with volatiles and ash contents of the fuels. A large amount of volatiles was burnt in the freeboard. SO2 emissions were negligible, while NOx emissions were generally high. Of the biomass fuels tested, orange tree pruning offered the higher efficiency and was the most environmentally friendly.

Suggested Citation

  • Vamvuka, Despina & Sfakiotakis, Stelios & Kotronakis, Manolis, 2012. "Fluidized bed combustion of residues from oranges’ plantations and processing," Renewable Energy, Elsevier, vol. 44(C), pages 231-237.
    • Handle: RePEc:eee:renene:v:44:y:2012:i:c:p:231-237
    DOI: 10.1016/j.renene.2012.01.083
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148112000948
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2012.01.083?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Van de Velden, Manon & Baeyens, Jan & Brems, Anke & Janssens, Bart & Dewil, Raf, 2010. "Fundamentals, kinetics and endothermicity of the biomass pyrolysis reaction," Renewable Energy, Elsevier, vol. 35(1), pages 232-242.
    2. Sun, Z. & Jin, B. & Zhang, M. & Liu, R. & Zhang, Y., 2008. "Experimental studies on cotton stalk combustion in a fluidized bed," Energy, Elsevier, vol. 33(8), pages 1224-1232.
    3. Kuprianov, Vladimir I. & Kaewklum, Rachadaporn & Chakritthakul, Songpol, 2011. "Effects of operating conditions and fuel properties on emission performance and combustion efficiency of a swirling fluidized-bed combustor fired with a biomass fuel," Energy, Elsevier, vol. 36(4), pages 2038-2048.
    4. Sun, Zhi-Ao & Jin, Bao-Sheng & Zhang, Ming-Yao & Liu, Ren-Ping & Zhang, Yong, 2008. "Experimental study on cotton stalk combustion in a circulating fluidized bed," Applied Energy, Elsevier, vol. 85(11), pages 1027-1040, November.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Vamvuka, Despina & Trikouvertis, Marios & Pentari, Despina & Alevizos, George, 2014. "Evaluation of ashes produced from fluidized bed combustion of residues from oranges' plantations and processing," Renewable Energy, Elsevier, vol. 72(C), pages 336-343.
    2. Okasha, Farouk M., 2016. "Short overview on the jetting-fountain fluidized bed (JFFB) combustor," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 674-686.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Duan, Feng & Liu, Jian & Chyang, Chien-Song & Hu, Chun-Hsuan & Tso, Jim, 2013. "Combustion behavior and pollutant emission characteristics of RDF (refuse derived fuel) and sawdust in a vortexing fluidized bed combustor," Energy, Elsevier, vol. 57(C), pages 421-426.
    2. Kuprianov, Vladimir I. & Kaewklum, Rachadaporn & Chakritthakul, Songpol, 2011. "Effects of operating conditions and fuel properties on emission performance and combustion efficiency of a swirling fluidized-bed combustor fired with a biomass fuel," Energy, Elsevier, vol. 36(4), pages 2038-2048.
    3. Ren, Qiangqiang & Zhao, Changsui, 2015. "Evolution of fuel-N in gas phase during biomass pyrolysis," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 408-418.
    4. Arromdee, Porametr & Kuprianov, Vladimir I., 2012. "Combustion of peanut shells in a cone-shaped bubbling fluidized-bed combustor using alumina as the bed material," Applied Energy, Elsevier, vol. 97(C), pages 470-482.
    5. Tao, Guangcan & Lestander, Torbjörn A. & Geladi, Paul & Xiong, Shaojun, 2012. "Biomass properties in association with plant species and assortments I: A synthesis based on literature data of energy properties," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 3481-3506.
    6. Tripathi, Manoj & Sahu, J.N. & Ganesan, P., 2016. "Effect of process parameters on production of biochar from biomass waste through pyrolysis: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 467-481.
    7. Guo, Feihong & Liu, Weizhen & He, Yi & Li, Xinjun & Zhang, Houhu, 2024. "Study on the combustion characteristics and pollutant emissions of cold-pressed pellets and pellet powders in fluidized-bed," Renewable Energy, Elsevier, vol. 220(C).
    8. Tao, Guangcan & Geladi, Paul & Lestander, Torbjörn A. & Xiong, Shaojun, 2012. "Biomass properties in association with plant species and assortments. II: A synthesis based on literature data for ash elements," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 3507-3522.
    9. Sher, Farooq & Pans, Miguel A. & Afilaka, Daniel T. & Sun, Chenggong & Liu, Hao, 2017. "Experimental investigation of woody and non-woody biomass combustion in a bubbling fluidised bed combustor focusing on gaseous emissions and temperature profiles," Energy, Elsevier, vol. 141(C), pages 2069-2080.
    10. Hung-Ta Wen & Jau-Huai Lu & Mai-Xuan Phuc, 2021. "Applying Artificial Intelligence to Predict the Composition of Syngas Using Rice Husks: A Comparison of Artificial Neural Networks and Gradient Boosting Regression," Energies, MDPI, vol. 14(10), pages 1-18, May.
    11. Primaz, Carmem T. & Ribes-Greus, Amparo & Jacques, Rosângela A., 2021. "Valorization of cotton residues for production of bio-oil and engineered biochar," Energy, Elsevier, vol. 235(C).
    12. Ábrego, J. & Atienza-Martínez, M. & Plou, F. & Arauzo, J., 2019. "Heat requirement for fixed bed pyrolysis of beechwood chips," Energy, Elsevier, vol. 178(C), pages 145-157.
    13. López-González, D. & Puig-Gamero, M. & Acién, F.G. & García-Cuadra, F. & Valverde, J.L. & Sanchez-Silva, L., 2015. "Energetic, economic and environmental assessment of the pyrolysis and combustion of microalgae and their oils," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1752-1770.
    14. Youssef, Mahmoud A. & Wahid, Seddik S. & Mohamed, Maher A. & Askalany, Ahmed A., 2009. "Experimental study on Egyptian biomass combustion in circulating fluidized bed," Applied Energy, Elsevier, vol. 86(12), pages 2644-2650, December.
    15. M. N. Uddin & Kuaanan Techato & Juntakan Taweekun & Md Mofijur Rahman & M. G. Rasul & T. M. I. Mahlia & S. M. Ashrafur, 2018. "An Overview of Recent Developments in Biomass Pyrolysis Technologies," Energies, MDPI, vol. 11(11), pages 1-24, November.
    16. Andrew N. Amenaghawon & Chinedu L. Anyalewechi & Charity O. Okieimen & Heri Septya Kusuma, 2021. "Biomass pyrolysis technologies for value-added products: a state-of-the-art review," Environment, Development and Sustainability: A Multidisciplinary Approach to the Theory and Practice of Sustainable Development, Springer, vol. 23(10), pages 14324-14378, October.
    17. Kartal, Furkan & Dalbudak, Yağmur & Özveren, Uğur, 2023. "Prediction of thermal degradation of biopolymers in biomass under pyrolysis atmosphere by means of machine learning," Renewable Energy, Elsevier, vol. 204(C), pages 774-787.
    18. Mouna Gmar & Hassine Bouafif & Besma Bouslimi & Flavia L. Braghiroli & Ahmed Koubaa, 2022. "Pyrolysis of Chromated Copper Arsenate-Treated Wood: Investigation of Temperature, Granulometry, Biochar Yield, and Metal Pathways," Energies, MDPI, vol. 15(14), pages 1-15, July.
    19. Granada, E. & Eguía, P. & Vilan, J.A. & Comesaña, J.A. & Comesaña, R., 2012. "FTIR quantitative analysis technique for gases. Application in a biomass thermochemical process," Renewable Energy, Elsevier, vol. 41(C), pages 416-421.
    20. Amutio, M. & Lopez, G. & Artetxe, M. & Elordi, G. & Olazar, M. & Bilbao, J., 2012. "Influence of temperature on biomass pyrolysis in a conical spouted bed reactor," Resources, Conservation & Recycling, Elsevier, vol. 59(C), pages 23-31.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:44:y:2012:i:c:p:231-237. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.