IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v163y2021icp2081-2097.html
   My bibliography  Save this article

Active flutter control of the wind turbines using double-pitched blades

Author

Listed:
  • Chen, Bei
  • Hua, Xugang
  • Zhang, Zili
  • Nielsen, Søren R.K.
  • Chen, Zhengqing

Abstract

Classical flutter of a wind turbine blade is a concerned issue to hinder the wind utilization to a large extent. Recent predictions showed a decreasing flutter margin (the ratio of flutter speed to rated rotor speed) with the increase in wind turbine size. To address this issue, a new blade configuration called the double-pitched blade is proposed and analytically investigated for its potential to enhance the flutter suppressing capability of modern large-size wind turbine blades. This new blade comprise an inner part and a tip part, where the tip part can rotate (or pitch) independently with respect to the inner part through a tip actuator commanded by a feedback control law. The aerodynamic loads of blade tip due to the actively controlled rotation of the tip part provide a torque on the inner part, which provides damping for the torsional mode of the wind turbine blade. The effectiveness of this new double-pitched blade for suppressing flutter is verified through a simulation study conducted on a 907-DOF aero-servo-elastic wind turbine model. Parametric studies are performed on two main design parameters, i.e. the length of the tip part and the associated chordwise location of tip shaft with respected to the blade cross section, and flutter control performance are obtained by numerical optimization process. Simulation results show the optimal length of tip part is around 3.3%of blade length, and the associated chordwise location of tip shaft is around 45%of chord length, the flutter amplitude of the conventional blade can be mitigated to around 4%using this double-pitched blade.

Suggested Citation

  • Chen, Bei & Hua, Xugang & Zhang, Zili & Nielsen, Søren R.K. & Chen, Zhengqing, 2021. "Active flutter control of the wind turbines using double-pitched blades," Renewable Energy, Elsevier, vol. 163(C), pages 2081-2097.
    • Handle: RePEc:eee:renene:v:163:y:2021:i:c:p:2081-2097
    DOI: 10.1016/j.renene.2020.10.122
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148120316943
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2020.10.122?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zili Zhang & Søren R. K. Nielsen & Frede Blaabjerg & Dao Zhou, 2014. "Dynamics and Control of Lateral Tower Vibrations in Offshore Wind Turbines by Means of Active Generator Torque," Energies, MDPI, vol. 7(11), pages 1-27, November.
    2. Wang, Lin & Liu, Xiongwei & Renevier, Nathalie & Stables, Matthew & Hall, George M., 2014. "Nonlinear aeroelastic modelling for wind turbine blades based on blade element momentum theory and geometrically exact beam theory," Energy, Elsevier, vol. 76(C), pages 487-501.
    3. Lanzafame, R. & Messina, M., 2009. "Design and performance of a double-pitch wind turbine with non-twisted blades," Renewable Energy, Elsevier, vol. 34(5), pages 1413-1420.
    4. Mo, Wenwei & Li, Deyuan & Wang, Xianneng & Zhong, Cantang, 2015. "Aeroelastic coupling analysis of the flexible blade of a wind turbine," Energy, Elsevier, vol. 89(C), pages 1001-1009.
    5. Yu, Guohua & Shen, Xin & Zhu, Xiaocheng & Du, Zhaohui, 2011. "An insight into the separate flow and stall delay for HAWT," Renewable Energy, Elsevier, vol. 36(1), pages 69-76.
    6. Yang, Hua & Shen, Wenzhong & Xu, Haoran & Hong, Zedong & Liu, Chao, 2014. "Prediction of the wind turbine performance by using BEM with airfoil data extracted from CFD," Renewable Energy, Elsevier, vol. 70(C), pages 107-115.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Azael Duran Castillo & Juan C. Jauregui-Correa & Francisco Herbert & Krystel K. Castillo-Villar & Jesus Alejandro Franco & Quetzalcoatl Hernandez-Escobedo & Alberto-Jesus Perea-Moreno & Alfredo Alcayd, 2021. "The Effect of a Flexible Blade for Load Alleviation in Wind Turbines," Energies, MDPI, vol. 14(16), pages 1-15, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Bai, Chi-Jeng & Wang, Wei-Cheng, 2016. "Review of computational and experimental approaches to analysis of aerodynamic performance in horizontal-axis wind turbines (HAWTs)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 63(C), pages 506-519.
    2. Ebrahimi, Abbas & Sekandari, Mahmood, 2018. "Transient response of the flexible blade of horizontal-axis wind turbines in wind gusts and rapid yaw changes," Energy, Elsevier, vol. 145(C), pages 261-275.
    3. Shafiqur Rehman & Md. Mahbub Alam & Luai M. Alhems & M. Mujahid Rafique, 2018. "Horizontal Axis Wind Turbine Blade Design Methodologies for Efficiency Enhancement—A Review," Energies, MDPI, vol. 11(3), pages 1-34, February.
    4. Li, Zhiguo & Gao, Zhiying & Dai, Yuanjun & Wen, Caifeng & Zhang, Liru & Wang, Jianwen, 2023. "Unsteady aeroelastic performance analysis for large-scale megawatt wind turbines based on a novel aeroelastic coupling model," Renewable Energy, Elsevier, vol. 218(C).
    5. Li, Qing’an & Xu, Jianzhong & Kamada, Yasunari & Takao, Maeda & Nishimura, Shogo & Wu, Guangxing & Cai, Chang, 2020. "Experimental investigations of airfoil surface flow of a horizontal axis wind turbine with LDV measurements," Energy, Elsevier, vol. 191(C).
    6. Tang, Di & Bao, Shiyi & Luo, Lijia & Mao, Jianfeng & Lv, Binbin & Guo, Hongtao, 2017. "Study on the aeroelastic responses of a wind turbine using a coupled multibody-FVW method," Energy, Elsevier, vol. 141(C), pages 2300-2313.
    7. Siddiqui, M. Salman & Rasheed, Adil & Tabib, Mandar & Kvamsdal, Trond, 2019. "Numerical investigation of modeling frameworks and geometric approximations on NREL 5 MW wind turbine," Renewable Energy, Elsevier, vol. 132(C), pages 1058-1075.
    8. Ikeda, Teruaki & Tanaka, Hiroto & Yoshimura, Ryosuke & Noda, Ryusuke & Fujii, Takeo & Liu, Hao, 2018. "A robust biomimetic blade design for micro wind turbines," Renewable Energy, Elsevier, vol. 125(C), pages 155-165.
    9. Imraan, Mustahib & Sharma, Rajnish N. & Flay, Richard G.J., 2013. "Wind tunnel testing of a wind turbine with telescopic blades: The influence of blade extension," Energy, Elsevier, vol. 53(C), pages 22-32.
    10. Jijian Lian & Yue Zhao & Chong Lian & Haijun Wang & Xiaofeng Dong & Qi Jiang & Huan Zhou & Junni Jiang, 2018. "Application of an Eddy Current-Tuned Mass Damper to Vibration Mitigation of Offshore Wind Turbines," Energies, MDPI, vol. 11(12), pages 1-18, November.
    11. Muhammad Moman Shahzad & Xun’an Zhang & Xinwei Wang, 2022. "Identification of Structural Damage and Damping Performance of a Mega-Subcontrolled Structural System (MSCSS) Subjected to Seismic Action," Sustainability, MDPI, vol. 14(19), pages 1-26, September.
    12. Shen, Xin & Chen, Jin-Ge & Zhu, Xiao-Cheng & Liu, Peng-Yin & Du, Zhao-Hui, 2015. "Multi-objective optimization of wind turbine blades using lifting surface method," Energy, Elsevier, vol. 90(P1), pages 1111-1121.
    13. Zhang, Wenguang & Bai, Xuejian & Wang, Yifeng & Han, Yue & Hu, Yong, 2018. "Optimization of sizing parameters and multi-objective control of trailing edge flaps on a smart rotor," Renewable Energy, Elsevier, vol. 129(PA), pages 75-91.
    14. Chen, Peng & Han, Dezhi, 2022. "Effective wind speed estimation study of the wind turbine based on deep learning," Energy, Elsevier, vol. 247(C).
    15. Lanzafame, R. & Mauro, S. & Messina, M., 2013. "Wind turbine CFD modeling using a correlation-based transitional model," Renewable Energy, Elsevier, vol. 52(C), pages 31-39.
    16. Zhang, Zili, 2022. "Vibration suppression of floating offshore wind turbines using electromagnetic shunt tuned mass damper," Renewable Energy, Elsevier, vol. 198(C), pages 1279-1295.
    17. Francesco Mazzeo & Derek Micheletto & Alessandro Talamelli & Antonio Segalini, 2022. "An Experimental Study on a Wind Turbine Rotor Affected by Pitch Imbalance," Energies, MDPI, vol. 15(22), pages 1-16, November.
    18. Wang, Bingkai & Sun, Wenlei & Wang, Hongwei & Xu, Tiantian & Zou, Yi, 2024. "Research on rapid calculation method of wind turbine blade strain for digital twin," Renewable Energy, Elsevier, vol. 221(C).
    19. Wang, H. & Ke, S.T. & Wang, T.G. & Zhu, S.Y., 2020. "Typhoon-induced vibration response and the working mechanism of large wind turbine considering multi-stage effects," Renewable Energy, Elsevier, vol. 153(C), pages 740-758.
    20. Abutunis, Abdulaziz & Hussein, Rafid & Chandrashekhara, K., 2019. "A neural network approach to enhance blade element momentum theory performance for horizontal axis hydrokinetic turbine application," Renewable Energy, Elsevier, vol. 136(C), pages 1281-1293.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:163:y:2021:i:c:p:2081-2097. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.