IDEAS home Printed from https://ideas.repec.org/a/eee/reensy/v221y2022ics0951832022000497.html
   My bibliography  Save this article

A reliability assessment of the heating from a hybrid energy source based on combined heat and power and wind power plants

Author

Listed:
  • Postnikov, Ivan

Abstract

Nowadays, improvement in fuel economy (efficiency enhancement) and reduction in emissions are pressing issues for many energy systems. One of the most promising solutions is an integration of renewable with conventional energy sources running on fossil fuels. Hybrid energy sources have the advantages of both technologies and can significantly improve the efficiency of energy supply to consumers. At the same time, the non-stationary units operating as part of a hybrid energy source can cause problems with the energy (electrical and thermal energy) supply reliability (when analyzed and ensured). This study focuses on analysis (assessment) of reliability of heat output (supply) from a hybrid energy source based on a wind power plant (WPP) and a combined heat and power plant (CHPP) operating on fossil fuel since the CHPP operates following a thermal energy profile. The essential energy benefit of the proposed technology is the replacement of part of fossil fuel in the efficient heat and power cogeneration cycle at CHPP by energy generated from WPP. The methods proposed to solve reliability problem are based on some laws of the reliability theory, Markov random processes, the graph theory, etc. The reliability analysis also considers the change in heat loads, the heat storage effect (thermal inertia), and the random fluctuations in wind speed. The results of the case example have been analyzed, and some qualitative relationships characterizing general properties for similar objects have been obtained.

Suggested Citation

  • Postnikov, Ivan, 2022. "A reliability assessment of the heating from a hybrid energy source based on combined heat and power and wind power plants," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    • Handle: RePEc:eee:reensy:v:221:y:2022:i:c:s0951832022000497
    DOI: 10.1016/j.ress.2022.108372
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0951832022000497
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.ress.2022.108372?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Artigao, Estefania & Martín-Martínez, Sergio & Honrubia-Escribano, Andrés & Gómez-Lázaro, Emilio, 2018. "Wind turbine reliability: A comprehensive review towards effective condition monitoring development," Applied Energy, Elsevier, vol. 228(C), pages 1569-1583.
    2. Postnikov, Ivan & Stennikov, Valery & Mednikova, Ekaterina & Penkovskii, Andrey, 2018. "Methodology for optimization of component reliability of heat supply systems," Applied Energy, Elsevier, vol. 227(C), pages 365-374.
    3. Eryilmaz, Serkan & Devrim, Yilser, 2019. "Theoretical derivation of wind plant power distribution with the consideration of wind turbine reliability," Reliability Engineering and System Safety, Elsevier, vol. 185(C), pages 192-197.
    4. Eryilmaz, Serkan & Kan, Cihangir, 2020. "Reliability based modeling and analysis for a wind power system integrated by two wind farms considering wind speed dependence," Reliability Engineering and System Safety, Elsevier, vol. 203(C).
    5. Eryilmaz, Serkan & Bulanık, İrem & Devrim, Yilser, 2021. "Reliability based modeling of hybrid solar/wind power system for long term performance assessment," Reliability Engineering and System Safety, Elsevier, vol. 209(C).
    6. Kan, Cihangir & Devrim, Yilser & Eryilmaz, Serkan, 2020. "On the theoretical distribution of the wind farm power when there is a correlation between wind speed and wind turbine availability," Reliability Engineering and System Safety, Elsevier, vol. 203(C).
    7. Guo, Haitao & Watson, Simon & Tavner, Peter & Xiang, Jiangping, 2009. "Reliability analysis for wind turbines with incomplete failure data collected from after the date of initial installation," Reliability Engineering and System Safety, Elsevier, vol. 94(6), pages 1057-1063.
    8. Eryilmaz, Serkan & Navarro, Jorge, 2022. "A decision theoretic framework for reliability-based optimal wind turbine selection," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    9. Lisnianski, Anatoly & Elmakias, David & Laredo, David & Ben Haim, Hanoch, 2012. "A multi-state Markov model for a short-term reliability analysis of a power generating unit," Reliability Engineering and System Safety, Elsevier, vol. 98(1), pages 1-6.
    10. Adedipe, Tosin & Shafiee, Mahmood & Zio, Enrico, 2020. "Bayesian Network Modelling for the Wind Energy Industry: An Overview," Reliability Engineering and System Safety, Elsevier, vol. 202(C).
    11. Slot, René M.M. & Sørensen, John D. & Sudret, Bruno & Svenningsen, Lasse & Thøgersen, Morten L., 2020. "Surrogate model uncertainty in wind turbine reliability assessment," Renewable Energy, Elsevier, vol. 151(C), pages 1150-1162.
    12. Li, Yao & Coolen, Frank P.A. & Zhu, Caichao & Tan, Jianjun, 2020. "Reliability assessment of the hydraulic system of wind turbines based on load-sharing using survival signature," Renewable Energy, Elsevier, vol. 153(C), pages 766-776.
    13. Pliego Marugán, Alberto & Peco Chacón, Ana María & García Márquez, Fausto Pedro, 2019. "Reliability analysis of detecting false alarms that employ neural networks: A real case study on wind turbines," Reliability Engineering and System Safety, Elsevier, vol. 191(C).
    14. Gvozdenac, Dušan & Urošević, Branka Gvozdenac & Menke, Christoph & Urošević, Dragan & Bangviwat, Athikom, 2017. "High efficiency cogeneration: CHP and non-CHP energy," Energy, Elsevier, vol. 135(C), pages 269-278.
    15. Wang, Feng & Chen, Jincheng & Xu, Bing & Stelson, Kim A., 2019. "Improving the reliability and energy production of large wind turbine with a digital hydrostatic drivetrain," Applied Energy, Elsevier, vol. 251(C), pages 1-1.
    16. Shaheen, Abdullah M. & Ginidi, Ahmed R. & El-Sehiemy, Ragab A. & Elattar, Ehab E., 2021. "Optimal economic power and heat dispatch in Cogeneration Systems including wind power," Energy, Elsevier, vol. 225(C).
    17. Harmsen, Robert & Crijns-Graus, Wina, 2021. "Unhiding the role of CHP in power & heat sector decomposition analyses," Energy Policy, Elsevier, vol. 152(C).
    18. Leimeister, Mareike & Kolios, Athanasios, 2021. "Reliability-based design optimization of a spar-type floating offshore wind turbine support structure," Reliability Engineering and System Safety, Elsevier, vol. 213(C).
    19. Eryilmaz, Serkan, 2018. "Reliability analysis of multi-state system with three-state components and its application to wind energy," Reliability Engineering and System Safety, Elsevier, vol. 172(C), pages 58-63.
    20. Shu, Liwei & Chen, Lingen & Jin, Jiashan & Yu, Jun & Sun, Fengrui & Wu, Chih, 2005. "Functional reliability simulation for a power-station's steam-turbine," Applied Energy, Elsevier, vol. 80(1), pages 61-66, January.
    21. Wang, Jiang-Jiang & Fu, Chao & Yang, Kun & Zhang, Xu-Tao & Shi, Guo-hua & Zhai, John, 2013. "Reliability and availability analysis of redundant BCHP (building cooling, heating and power) system," Energy, Elsevier, vol. 61(C), pages 531-540.
    22. Habibi, Hamed & Howard, Ian & Simani, Silvio, 2019. "Reliability improvement of wind turbine power generation using model-based fault detection and fault tolerant control: A review," Renewable Energy, Elsevier, vol. 135(C), pages 877-896.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Zeng, Ying & Huang, Tudi & Li, Yan-Feng & Huang, Hong-Zhong, 2023. "Reliability modeling for power converter in satellite considering periodic phased mission," Reliability Engineering and System Safety, Elsevier, vol. 232(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Eryilmaz, Serkan & Bulanık, İrem & Devrim, Yilser, 2021. "Reliability based modeling of hybrid solar/wind power system for long term performance assessment," Reliability Engineering and System Safety, Elsevier, vol. 209(C).
    2. Eryilmaz, Serkan & Navarro, Jorge, 2022. "A decision theoretic framework for reliability-based optimal wind turbine selection," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    3. Postnikov, Ivan & Stennikov, Valery & Mednikova, Ekaterina & Penkovskii, Andrey, 2018. "Methodology for optimization of component reliability of heat supply systems," Applied Energy, Elsevier, vol. 227(C), pages 365-374.
    4. Jorge Maldonado-Correa & Sergio Martín-Martínez & Estefanía Artigao & Emilio Gómez-Lázaro, 2020. "Using SCADA Data for Wind Turbine Condition Monitoring: A Systematic Literature Review," Energies, MDPI, vol. 13(12), pages 1-21, June.
    5. Jiang, Zhiyuan & Huang, Xianzhen & Wang, Bingxiang & Liao, Xin & Liu, Huizhen & Ding, Pengfei, 2024. "Time-dependent reliability-based design optimization of main shaft bearings in wind turbines involving mixed-integer variables," Reliability Engineering and System Safety, Elsevier, vol. 243(C).
    6. Zhang, Cai Wen & Zhang, Tieling & Chen, Nan & Jin, Tongdan, 2013. "Reliability modeling and analysis for a novel design of modular converter system of wind turbines," Reliability Engineering and System Safety, Elsevier, vol. 111(C), pages 86-94.
    7. Lin, Zi & Cevasco, Debora & Collu, Maurizio, 2020. "A methodology to develop reduced-order models to support the operation and maintenance of offshore wind turbines," Applied Energy, Elsevier, vol. 259(C).
    8. Beyza, Jesus & Yusta, Jose M., 2021. "The effects of the high penetration of renewable energies on the reliability and vulnerability of interconnected electric power systems," Reliability Engineering and System Safety, Elsevier, vol. 215(C).
    9. Kan, Cihangir & Devrim, Yilser & Eryilmaz, Serkan, 2020. "On the theoretical distribution of the wind farm power when there is a correlation between wind speed and wind turbine availability," Reliability Engineering and System Safety, Elsevier, vol. 203(C).
    10. Kong, Yun & Qin, Zhaoye & Wang, Tianyang & Han, Qinkai & Chu, Fulei, 2021. "An enhanced sparse representation-based intelligent recognition method for planet bearing fault diagnosis in wind turbines," Renewable Energy, Elsevier, vol. 173(C), pages 987-1004.
    11. Eryilmaz, Serkan & Devrim, Yilser, 2019. "Theoretical derivation of wind plant power distribution with the consideration of wind turbine reliability," Reliability Engineering and System Safety, Elsevier, vol. 185(C), pages 192-197.
    12. Li, He & Guedes Soares, C, 2022. "Assessment of failure rates and reliability of floating offshore wind turbines," Reliability Engineering and System Safety, Elsevier, vol. 228(C).
    13. Ivan Postnikov & Ekaterina Samarkina & Andrey Penkovskii & Vladimir Kornev & Denis Sidorov, 2023. "Modeling Unpredictable Behavior of Energy Facilities to Ensure Reliable Operation in a Cyber-Physical System," Energies, MDPI, vol. 16(19), pages 1-11, October.
    14. Wei Li & Shinai Xu & Baiyun Qian & Xiaoxia Gao & Xiaoxun Zhu & Zeqi Shi & Wei Liu & Qiaoliang Hu, 2022. "Large-Scale Wind Turbine’s Load Characteristics Excited by the Wind and Grid in Complex Terrain: A Review," Sustainability, MDPI, vol. 14(24), pages 1-29, December.
    15. Wang, Jian & Gao, Shibin & Yu, Long & Zhang, Dongkai & Ding, Chugang & Chen, Ke & Kou, Lei, 2022. "Predicting wind-caused floater intrusion risk for overhead contact lines based on Bayesian neural network with spatiotemporal correlation analysis," Reliability Engineering and System Safety, Elsevier, vol. 225(C).
    16. Afef Fekih & Hamed Habibi & Silvio Simani, 2022. "Fault Diagnosis and Fault Tolerant Control of Wind Turbines: An Overview," Energies, MDPI, vol. 15(19), pages 1-21, September.
    17. Hariri, Ali-Mohammad & Hashemi-Dezaki, Hamed & A. Hejazi, Maryam, 2020. "A novel generalized analytical reliability assessment method of smart grids including renewable and non-renewable distributed generations and plug-in hybrid electric vehicles," Reliability Engineering and System Safety, Elsevier, vol. 196(C).
    18. Kristjanpoller, Fredy & Cárdenas-Pantoja, Nicolás & Viveros, Pablo & Pascual, Rodrigo, 2023. "Wind farm life cycle cost modelling based on oversizing capacity under load sharing configuration," Reliability Engineering and System Safety, Elsevier, vol. 236(C).
    19. Thapa, Mishal & Missoum, Samy, 2022. "Uncertainty quantification and global sensitivity analysis of composite wind turbine blades," Reliability Engineering and System Safety, Elsevier, vol. 222(C).
    20. Shulin Li & Fuqiang Tian & Haitao He & Hongqi Liu & Shifu Zhang & Yudi Li, 2024. "Investigation on Overvoltage Distribution in Stator Windings of Permanent Magnet Synchronous Wind Turbines," Energies, MDPI, vol. 17(17), pages 1-15, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:reensy:v:221:y:2022:i:c:s0951832022000497. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: https://www.journals.elsevier.com/reliability-engineering-and-system-safety .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.