IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v61y2013icp531-540.html
   My bibliography  Save this article

Reliability and availability analysis of redundant BCHP (building cooling, heating and power) system

Author

Listed:
  • Wang, Jiang-Jiang
  • Fu, Chao
  • Yang, Kun
  • Zhang, Xu-Tao
  • Shi, Guo-hua
  • Zhai, John

Abstract

Failure of a component in BCHP (building cooling, heating and power) system may result in failure of a sub-system or of the whole system. The reliability and availability analysis of BCHP system is helpful to the designer to decide the redundancy in case of equipment failure. This paper presents the redundant design of BCHP system and its operation mode. The SSM (state-space method) combined to the probabilistic analysis of Markov model, is employed to analyze the reliabilities of three forms of energy supply including electricity, heat and cool in BCHP system. The failure rate, the repair rate, the availability and the MTBF (mean time to failure) of the redundant and non-redundant BCHP systems are deduced and analyzed respectively. Then, a numerical case for the reliability analysis of the redundant and non-redundant BCHP systems is compared to the SP (separation production) system. Finally, the calculation results indicate that the reliability of the redundant BCHP system compared to the SP system obviously increases, and the failure rates of the electricity, heat and cool supplies decrease 99.63%, 94.30% and 99.97% respectively.

Suggested Citation

  • Wang, Jiang-Jiang & Fu, Chao & Yang, Kun & Zhang, Xu-Tao & Shi, Guo-hua & Zhai, John, 2013. "Reliability and availability analysis of redundant BCHP (building cooling, heating and power) system," Energy, Elsevier, vol. 61(C), pages 531-540.
    • Handle: RePEc:eee:energy:v:61:y:2013:i:c:p:531-540
    DOI: 10.1016/j.energy.2013.09.018
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S036054421300769X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2013.09.018?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wang, Jiang-Jiang & Jing, You-Yin & Zhang, Chun-Fa, 2010. "Optimization of capacity and operation for CCHP system by genetic algorithm," Applied Energy, Elsevier, vol. 87(4), pages 1325-1335, April.
    2. Wang, Jiang-Jiang & Jing, You-Yin & Zhang, Chun-Fa & Zhai, Zhiqiang (John), 2011. "Performance comparison of combined cooling heating and power system in different operation modes," Applied Energy, Elsevier, vol. 88(12), pages 4621-4631.
    3. Jing, You-Yin & Bai, He & Wang, Jiang-Jiang, 2012. "Multi-objective optimization design and operation strategy analysis of BCHP system based on life cycle assessment," Energy, Elsevier, vol. 37(1), pages 405-416.
    4. Hao, Xiaoli & Zhang, Guoqiang & Chen, Youming, 2007. "Role of BCHP in energy and environmental sustainable development and its prospects in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 11(8), pages 1827-1842, October.
    5. Wang, Jiangjiang & Zhai, Zhiqiang John & Zhang, Chunfa & Jing, Youyin, 2010. "Environmental impact analysis of BCHP system in different climate zones in China," Energy, Elsevier, vol. 35(10), pages 4208-4216.
    6. Wu, Jing-yi & Wang, Jia-long & Li, Sheng, 2012. "Multi-objective optimal operation strategy study of micro-CCHP system," Energy, Elsevier, vol. 48(1), pages 472-483.
    7. Wang, Jiangjiang & Zhai, Zhiqiang (John) & Jing, Youyin & Zhang, Chunfa, 2010. "Optimization design of BCHP system to maximize to save energy and reduce environmental impact," Energy, Elsevier, vol. 35(8), pages 3388-3398.
    8. Frangopoulos, Christos A. & Dimopoulos, George G., 2004. "Effect of reliability considerations on the optimal synthesis, design and operation of a cogeneration system," Energy, Elsevier, vol. 29(3), pages 309-329.
    9. Ebrahimi, Masood & Keshavarz, Ali, 2013. "Sizing the prime mover of a residential micro-combined cooling heating and power (CCHP) system by multi-criteria sizing method for different climates," Energy, Elsevier, vol. 54(C), pages 291-301.
    10. Xu, Jianzhong & Sui, Jun & Li, Bingyu & Yang, Minlin, 2010. "Research, development and the prospect of combined cooling, heating, and power systems," Energy, Elsevier, vol. 35(11), pages 4361-4367.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Li, Gengfeng & Bie, Zhaohong & Kou, Yu & Jiang, Jiangfeng & Bettinelli, Mattia, 2016. "Reliability evaluation of integrated energy systems based on smart agent communication," Applied Energy, Elsevier, vol. 167(C), pages 397-406.
    2. Ren, Hongbo & Jiang, Zipei & Wu, Qiong & Li, Qifen & Yang, Yongwen, 2022. "Integrated optimization of a regional integrated energy system with thermal energy storage considering both resilience and reliability," Energy, Elsevier, vol. 261(PB).
    3. Li, Minzhi & Jiang, Xi Zhuo & Zheng, Danxing & Zeng, Guangbiao & Shi, Lin, 2016. "Thermodynamic boundaries of energy saving in conventional CCHP (Combined Cooling, Heating and Power) systems," Energy, Elsevier, vol. 94(C), pages 243-249.
    4. Juanwei, Chen & Tao, Yu & Yue, Xu & Xiaohua, Cheng & Bo, Yang & Baomin, Zhen, 2019. "Fast analytical method for reliability evaluation of electricity-gas integrated energy system considering dispatch strategies," Applied Energy, Elsevier, vol. 242(C), pages 260-272.
    5. Haibin Cao & Peng Jiang & Ming Zeng, 2021. "A Novel Comprehensive Benefit Evaluation of IEGES Based on the TOPSIS Optimized by MEE Method," Energies, MDPI, vol. 14(3), pages 1-19, February.
    6. Zare, V., 2016. "Exergoeconomic analysis with reliability and availability considerations of a nuclear energy-based combined cycle power plant," Energy, Elsevier, vol. 96(C), pages 187-196.
    7. Yang, Yu & Liu, Zhiqiang & Xie, Nan & Wang, Jiaqiang & Cui, Yanping & Agbodjan, Yawovi Souley, 2023. "Multi-criteria optimization of multi-energy complementary systems considering reliability, economic and environmental effects," Energy, Elsevier, vol. 269(C).
    8. Han, Jie & Ouyang, Leixin & Xu, Yuzhen & Zeng, Rong & Kang, Shushuo & Zhang, Guoqiang, 2016. "Current status of distributed energy system in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 288-297.
    9. Postnikov, Ivan, 2022. "A reliability assessment of the heating from a hybrid energy source based on combined heat and power and wind power plants," Reliability Engineering and System Safety, Elsevier, vol. 221(C).
    10. George-Williams, Hindolo & Patelli, Edoardo, 2016. "A hybrid load flow and event driven simulation approach to multi-state system reliability evaluation," Reliability Engineering and System Safety, Elsevier, vol. 152(C), pages 351-367.
    11. Postnikov, Ivan & Stennikov, Valery & Mednikova, Ekaterina & Penkovskii, Andrey, 2018. "Methodology for optimization of component reliability of heat supply systems," Applied Energy, Elsevier, vol. 227(C), pages 365-374.
    12. Kou, Yu & Bie, Zhaohong & Li, Gengfeng & Liu, Fan & Jiang, Jiangfeng, 2021. "Reliability evaluation of multi-agent integrated energy systems with fully distributed communication," Energy, Elsevier, vol. 224(C).
    13. Li, Longxi & Mu, Hailin & Li, Nan & Li, Miao, 2016. "Economic and environmental optimization for distributed energy resource systems coupled with district energy networks," Energy, Elsevier, vol. 109(C), pages 947-960.
    14. Zhang, Jintao & Bagtzoglou, Yiannis & Zhu, Jin & Li, Baikun & Zhang, Wei, 2023. "Fragility-based system performance assessment of critical power infrastructure," Reliability Engineering and System Safety, Elsevier, vol. 232(C).
    15. Yang, Xiaohui & Liu, Kang & Leng, Zhengyang & Liu, Tao & Zhang, Liufang & Mei, Linghao, 2022. "Multi-dimensions analysis of solar hybrid CCHP systems with redundant design," Energy, Elsevier, vol. 253(C).
    16. Jinming Jiang & Xindong Wei & Weijun Gao & Soichiro Kuroki & Zhonghui Liu, 2018. "Reliability and Maintenance Prioritization Analysis of Combined Cooling, Heating and Power Systems," Energies, MDPI, vol. 11(6), pages 1-24, June.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Han, Jie & Ouyang, Leixin & Xu, Yuzhen & Zeng, Rong & Kang, Shushuo & Zhang, Guoqiang, 2016. "Current status of distributed energy system in China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 55(C), pages 288-297.
    2. Cho, Heejin & Smith, Amanda D. & Mago, Pedro, 2014. "Combined cooling, heating and power: A review of performance improvement and optimization," Applied Energy, Elsevier, vol. 136(C), pages 168-185.
    3. Jing, You-Yin & Bai, He & Wang, Jiang-Jiang, 2012. "Multi-objective optimization design and operation strategy analysis of BCHP system based on life cycle assessment," Energy, Elsevier, vol. 37(1), pages 405-416.
    4. Chen, Ke & Pan, Ming, 2021. "Operation optimization of combined cooling, heating, and power superstructure system for satisfying demand fluctuation," Energy, Elsevier, vol. 237(C).
    5. Wei, Dajun & Chen, Alian & Sun, Bo & Zhang, Chenghui, 2016. "Multi-objective optimal operation and energy coupling analysis of combined cooling and heating system," Energy, Elsevier, vol. 98(C), pages 296-307.
    6. Miao Li & Yiran Feng & Maojun Zhou & Hailin Mu & Longxi Li & Yajun Wang, 2019. "Economic and Environmental Optimization for Distributed Energy System Integrated with District Energy Network," Energies, MDPI, vol. 12(10), pages 1-19, May.
    7. Li, Miao & Mu, Hailin & Li, Nan & Ma, Baoyu, 2016. "Optimal design and operation strategy for integrated evaluation of CCHP (combined cooling heating and power) system," Energy, Elsevier, vol. 99(C), pages 202-220.
    8. Liu, Mingxi & Shi, Yang & Fang, Fang, 2014. "Combined cooling, heating and power systems: A survey," Renewable and Sustainable Energy Reviews, Elsevier, vol. 35(C), pages 1-22.
    9. Wang, Jiangjiang & Yang, Ying & Mao, Tianzhi & Sui, Jun & Jin, Hongguang, 2015. "Life cycle assessment (LCA) optimization of solar-assisted hybrid CCHP system," Applied Energy, Elsevier, vol. 146(C), pages 38-52.
    10. Farahnak, Mehdi & Farzaneh-Gord, Mahmood & Deymi-Dashtebayaz, Mahdi & Dashti, Farshad, 2015. "Optimal sizing of power generation unit capacity in ICE-driven CCHP systems for various residential building sizes," Applied Energy, Elsevier, vol. 158(C), pages 203-219.
    11. Ju, Liwei & Tan, Zhongfu & Li, Huanhuan & Tan, Qingkun & Yu, Xiaobao & Song, Xiaohua, 2016. "Multi-objective operation optimization and evaluation model for CCHP and renewable energy based hybrid energy system driven by distributed energy resources in China," Energy, Elsevier, vol. 111(C), pages 322-340.
    12. Wu, Jing-yi & Wang, Jia-long & Li, Sheng, 2012. "Multi-objective optimal operation strategy study of micro-CCHP system," Energy, Elsevier, vol. 48(1), pages 472-483.
    13. Wang, Jiangjiang & Zhai, Zhiqiang (John) & Jing, Youyin & Zhang, Chunfa, 2010. "Optimization design of BCHP system to maximize to save energy and reduce environmental impact," Energy, Elsevier, vol. 35(8), pages 3388-3398.
    14. Ma, Weiwu & Fang, Song & Liu, Gang, 2017. "Hybrid optimization method and seasonal operation strategy for distributed energy system integrating CCHP, photovoltaic and ground source heat pump," Energy, Elsevier, vol. 141(C), pages 1439-1455.
    15. Li, Minzhi & Jiang, Xi Zhuo & Zheng, Danxing & Zeng, Guangbiao & Shi, Lin, 2016. "Thermodynamic boundaries of energy saving in conventional CCHP (Combined Cooling, Heating and Power) systems," Energy, Elsevier, vol. 94(C), pages 243-249.
    16. Gao, Penghui & Dai, Yanjun & Tong, YenWah & Dong, Pengwei, 2015. "Energy matching and optimization analysis of waste to energy CCHP (combined cooling, heating and power) system with exergy and energy level," Energy, Elsevier, vol. 79(C), pages 522-535.
    17. Wang, Jiang-Jiang & Xu, Zi-Long & Jin, Hong-Guang & Shi, Guo-hua & Fu, Chao & Yang, Kun, 2014. "Design optimization and analysis of a biomass gasification based BCHP system: A case study in Harbin, China," Renewable Energy, Elsevier, vol. 71(C), pages 572-583.
    18. Ershadi, Hamed & Karimipour, Arash, 2018. "Present a multi-criteria modeling and optimization (energy, economic and environmental) approach of industrial combined cooling heating and power (CCHP) generation systems using the genetic algorithm,," Energy, Elsevier, vol. 149(C), pages 286-295.
    19. Jing, You-Yin & Bai, He & Wang, Jiang-Jiang & Liu, Lei, 2012. "Life cycle assessment of a solar combined cooling heating and power system in different operation strategies," Applied Energy, Elsevier, vol. 92(C), pages 843-853.
    20. Wang, Jialong & Wu, Jingyin & Wang, Hongbin, 2015. "Experimental investigation of a dual-source powered absorption chiller based on gas engine waste heat and solar thermal energy," Energy, Elsevier, vol. 88(C), pages 680-689.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:61:y:2013:i:c:p:531-540. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.