IDEAS home Printed from https://ideas.repec.org/a/eee/phsmap/v537y2020ics0378437119314037.html
   My bibliography  Save this article

Accurate meso-scale simulation of mixed convective heat transfer in a porous media for a vented square with hot elliptic obstacle: An LBM approach

Author

Listed:
  • Javadzadegan, Ashkan
  • Joshaghani, Mohammad
  • Moshfegh, Abouzar
  • Akbari, Omid Ali
  • Afrouzi, Hamid Hassanzadeh
  • Toghraie, Davood

Abstract

In the present study, heat and fluid flow of water in a vented cavity with elliptical hot obstacle is numerically investigated using Lattice Boltzmann Method (LBM). This flow is assumed to be laminar, 2D and incompressible. The main purpose in this work is to investigate the effect of utilizing porous medium on mixed convective heat transfer in an obstructed vented cavity. The simulations are performed for Richardson number of 0.1, 1 and 10, porosity of 0.5, 0.7 and 0.9, and solid-to-fluid conductivity ratios of 10, 33.3, 66.7 and 100. The results are presented by streamlines, temperature contours, and Nusselt number curves. Results show that by increasing Richardson number, due to the dominance of natural convective heat transfer compared with that of the forced case, the heat penetration in fluid layers in all areas of the cavity is increased. Moreover, as the Richardson number increases, due to limitation of forced heat transfer, the temperature gradients in the cavity rise and the growth of thermal boundary layer becomes significant. This behavior has an undesirable effect on heat transfer of hot obstacle especially around the cavity outlet and right side of the obstacle. By decreasing the cavity porosity, the areas around the hot obstacle will experience higher heat penetration into the fluid and consequently the heat transfer is reduced. In this study, the highest Nusselt number is obtained for Richardson number of Ri=0.1 and porosity of Po=0.5 and the increase in Richardson number and porosity coefficient results in reduced Nusselt number in all areas around the hot obstacle. The porosity changes have more significant effect on heat transfer in smaller Richardson numbers. This results in Nusselt number higher about 79% in best condition at conductivity ratio of 33.33 (Ri=0.1) while it changes the Nusselt number about 17.4% at conductivity ratio of 10 (Ri=10).

Suggested Citation

  • Javadzadegan, Ashkan & Joshaghani, Mohammad & Moshfegh, Abouzar & Akbari, Omid Ali & Afrouzi, Hamid Hassanzadeh & Toghraie, Davood, 2020. "Accurate meso-scale simulation of mixed convective heat transfer in a porous media for a vented square with hot elliptic obstacle: An LBM approach," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 537(C).
    • Handle: RePEc:eee:phsmap:v:537:y:2020:i:c:s0378437119314037
    DOI: 10.1016/j.physa.2019.122439
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0378437119314037
    Download Restriction: Full text for ScienceDirect subscribers only. Journal offers the option of making the article available online on Science direct for a fee of $3,000
    File URL: https://libkey.io/10.1016/j.physa.2019.122439?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Ahmadi Balootaki, Azam & Karimipour, Arash & Toghraie, Davood, 2018. "Nano scale lattice Boltzmann method to simulate the mixed convection heat transfer of air in a lid-driven cavity with an endothermic obstacle inside," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 508(C), pages 681-701.
    2. Seta, Takeshi & Takegoshi, Eishun & Okui, Kenichi, 2006. "Lattice Boltzmann simulation of natural convection in porous media," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 72(2), pages 195-200.
    3. Nemati, Maedeh & Shateri Najaf Abady, Ali Reza & Toghraie, Davood & Karimipour, Arash, 2018. "Numerical investigation of the pseudopotential lattice Boltzmann modeling of liquid–vapor for multi-phase flows," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 489(C), pages 65-77.
    4. Hassanzadeh Afrouzi, H. & Moshfegh, Abouzar & Javadzadegan, Ashkan & Mohammadi, Maryam & Farhadi, Mousa, 2018. "Systematic fine-tuning of dissipative particle dynamics for mesoscale semidilute and dense colloidal suspensions," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 510(C), pages 492-506.
    5. Hassanzadeh Afrouzi, Hamid & Moshfegh, Abouzar & Farhadi, Mousa & Sedighi, Kurosh, 2018. "Dissipative particle dynamics: Effects of thermostating schemes on nano-colloid electrophoresis," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 497(C), pages 285-301.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Lioua Kolsi & Fatih Selimefendigil & Mohamed Omri & Hatem Rmili & Badreddine Ayadi & Chemseddine Maatki & Badr M. Alshammari, 2023. "CFD Study of MHD and Elastic Wall Effects on the Nanofluid Convection Inside a Ventilated Cavity Including Perforated Porous Object," Mathematics, MDPI, vol. 11(3), pages 1-21, January.
    2. Liu, Yanhong & Wang, Huimin, 2020. "Simulations of the rectangular wave-guide pattern in the complex Maxwell vorticity equations by lattice Boltzmann method," Mathematics and Computers in Simulation (MATCOM), Elsevier, vol. 173(C), pages 1-15.
    3. Hadipeykani, Majid & Aghadavoudi, Farshid & Toghraie, Davood, 2020. "A molecular dynamics simulation of the glass transition temperature and volumetric thermal expansion coefficient of thermoset polymer based epoxy nanocomposite reinforced by CNT: A statistical study," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 546(C).
    4. Su, Yan, 2024. "A mesoscale non-dimensional lattice Boltzmann model for self-sustained structures of swimming microbial suspensions," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 642(C).
    5. Jourabian, Mahmoud & Rabienataj Darzi, A. Ali & Akbari, Omid Ali & Toghraie, Davood, 2020. "The enthalpy-based lattice Boltzmann method (LBM) for simulation of NePCM melting in inclined elliptical annulus," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 548(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ezzatneshan, Eslam & Vaseghnia, Hamed, 2020. "Evaluation of equations of state in multiphase lattice Boltzmann method with considering surface wettability effects," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 541(C).
    2. Rasti, Ehsan & Talebi, Farhad & Mazaheri, Kiumars, 2019. "Improvement of drag reduction prediction in viscoelastic pipe flows using proper low-Reynolds k-ε turbulence models," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 516(C), pages 412-422.
    3. Afrouzi, Hamid Hassanzadeh & Ahmadian, Majid & Moshfegh, Abouzar & Toghraie, Davood & Javadzadegan, Ashkan, 2019. "Statistical analysis of pulsating non-Newtonian flow in a corrugated channel using Lattice-Boltzmann method," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 535(C).
    4. Jourabian, Mahmoud & Rabienataj Darzi, A. Ali & Akbari, Omid Ali & Toghraie, Davood, 2020. "The enthalpy-based lattice Boltzmann method (LBM) for simulation of NePCM melting in inclined elliptical annulus," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 548(C).
    5. Alipour, Pedram & Toghraie, Davood & Karimipour, Arash, 2019. "Investigation the atomic arrangement and stability of the fluid inside a rough nanochannel in both presence and absence of different roughness by using of accurate nano scale simulation," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 524(C), pages 639-660.
    6. Najafi, Mohammad Javid & Naghavi, Sayed Mahdi & Toghraie, Davood, 2019. "Numerical simulation of flow in hydro turbines channel to improve its efficiency by using of Lattice Boltzmann Method," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 520(C), pages 390-408.
    7. Dolatabadi, Peiman Davari & Khanlari, Karen & Ghafory Ashtiany, Mohsen & Hosseini, Mahmood, 2020. "System identification method by using inverse solution of equations of motion in time domain and noisy condition," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 538(C).
    8. Oleg Ilyin, 2022. "Low Dissipative Entropic Lattice Boltzmann Method," Mathematics, MDPI, vol. 10(21), pages 1-22, October.
    9. Ahmadi Balootaki, Azam & Karimipour, Arash & Toghraie, Davood, 2018. "Nano scale lattice Boltzmann method to simulate the mixed convection heat transfer of air in a lid-driven cavity with an endothermic obstacle inside," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 508(C), pages 681-701.
    10. Safaei, Mohammad Reza & Karimipour, Arash & Abdollahi, Ali & Nguyen, Truong Khang, 2018. "The investigation of thermal radiation and free convection heat transfer mechanisms of nanofluid inside a shallow cavity by lattice Boltzmann method," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 509(C), pages 515-535.
    11. Mahmoudi, Ahmed, 2019. "A scale analysis to study melting process driven by natural convection," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 524(C), pages 430-447.
    12. Alsarraf, Jalal & Moradikazerouni, Alireza & Shahsavar, Amin & Afrand, Masoud & Salehipour, Hamzeh & Tran, Minh Duc, 2019. "Hydrothermal analysis of turbulent boehmite alumina nanofluid flow with different nanoparticle shapes in a minichannel heat exchanger using two-phase mixture model," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 520(C), pages 275-288.
    13. Khaje khabaz, Moahamad & Eftekhari, S. Ali & Hashemian, Mohamad & Toghraie, Davood, 2020. "Optimal vibration control of multi-layer micro-beams actuated by piezoelectric layer based on modified couple stress and surface stress elasticity theories," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 546(C).
    14. Nafchi, Peyman Mirzakhani & Karimipour, Arash & Afrand, Masoud, 2019. "The evaluation on a new non-Newtonian hybrid mixture composed of TiO2/ZnO/EG to present a statistical approach of power law for its rheological and thermal properties," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 516(C), pages 1-18.
    15. Ma, Yuan & Mohebbi, Rasul & Rashidi, M.M. & Yang, Zhigang & Sheremet, Mikhail, 2020. "Nanoliquid thermal convection in I-shaped multiple-pipe heat exchanger under magnetic field influence," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 550(C).
    16. Li, Chengwu & Zhao, Yuechao & Ai, Dihao & Wang, Qifei & Peng, Zhigao & Li, Yingjun, 2020. "Multi-component LBM-LES model of the air and methane flow in tunnels and its validation," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 553(C).
    17. Jahangiri, Ali & Mohammadi, Samira & Akbari, Mohammad, 2019. "Modeling the one-dimensional inverse heat transfer problem using a Haar wavelet collocation approach," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 525(C), pages 13-26.
    18. Afrouzi, Hamid Hassanzadeh & Hosseini, Mirolah & Toghraie, Davood & Mehryaar, Ehsan & Afrand, Masoud, 2020. "Thermo-hydraulic characteristics investigation of nanofluid heat transfer in a microchannel with super hydrophobic surfaces under non-uniform magnetic field using Incompressible Preconditioned Lattice," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 553(C).
    19. Mahyari, Amirhossein Ansari & Karimipour, Arash & Afrand, Masoud, 2019. "Effects of dispersed added Graphene Oxide-Silicon Carbide nanoparticles to present a statistical formulation for the mixture thermal properties," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 521(C), pages 98-112.
    20. Hassanzadeh Afrouzi, Hamid & Moshfegh, Abouzar & Farhadi, Mousa & Sedighi, Kurosh, 2018. "Dissipative particle dynamics: Effects of thermostating schemes on nano-colloid electrophoresis," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 497(C), pages 285-301.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:phsmap:v:537:y:2020:i:c:s0378437119314037. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/physica-a-statistical-mechpplications/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.