IDEAS home Printed from https://ideas.repec.org/a/eee/phsmap/v538y2020ics0378437119315262.html
   My bibliography  Save this article

System identification method by using inverse solution of equations of motion in time domain and noisy condition

Author

Listed:
  • Dolatabadi, Peiman Davari
  • Khanlari, Karen
  • Ghafory Ashtiany, Mohsen
  • Hosseini, Mahmood

Abstract

In direct system identification (DSI) method, inverse solution of the equations of motion is applied to obtain physical parameters of a linear system (structural mass, damping, and stiffness matrices). With the small error in measurement, caused by sensor drift or signal noise, these physical parameters are identified with a significant drift. In this paper, a new simple post-processing method is proposed, for error reduction in DSI in the time domain in a manner that structural properties are identified without applying the optimization process. In noisy condition, baseline correction is applied through a nonic curve-fitting approach. The modified signals are partitioned into a number of sub-signals, and their mean is applied for system identification. The number of sub-signals is optimized so that the root mean square (RMS) of off-diagonal components of the mass matrix becomes near zero. Seeking more precision, the residual force in every time step at all degrees of freedom (DOFs) is minimized. The validity of the proposed method is tested on a multistory structure, subjected to a random force at the foundation level. In terms of incomplete measurement and 5% noise, identified parameters including mass, stiffness and damping matrices, have satisfying mean errors of 0.094%, 0.545%, and 4.42% with the coefficient of variations of 0.35%, 1.38% and 6.98%, respectively. The sensitivity of the proposed method to the noise level is also investigated. It is observed that the baseline slop of velocity and displacement signals are sharply increased when the noise level goes beyond 3%.

Suggested Citation

  • Dolatabadi, Peiman Davari & Khanlari, Karen & Ghafory Ashtiany, Mohsen & Hosseini, Mahmood, 2020. "System identification method by using inverse solution of equations of motion in time domain and noisy condition," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 538(C).
    • Handle: RePEc:eee:phsmap:v:538:y:2020:i:c:s0378437119315262
    DOI: 10.1016/j.physa.2019.122680
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0378437119315262
    Download Restriction: Full text for ScienceDirect subscribers only. Journal offers the option of making the article available online on Science direct for a fee of $3,000
    File URL: https://libkey.io/10.1016/j.physa.2019.122680?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Rezaei, M. & Azimian, A.R. & Toghraie, D., 2015. "Molecular dynamics study of an electro-kinetic fluid transport in a charged nanochannel based on the role of the stern layer," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 426(C), pages 25-34.
    2. Alipour, Pedram & Toghraie, Davood & Karimipour, Arash & Hajian, Mehdi, 2019. "Modeling different structures in perturbed Poiseuille flow in a nanochannel by using of molecular dynamics simulation: Study the equilibrium," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 515(C), pages 13-30.
    3. Jourabian, Mahmoud & Darzi, A. Ali Rabienataj & Toghraie, Davood & Akbari, Omid ali, 2018. "Melting process in porous media around two hot cylinders: Numerical study using the lattice Boltzmann method," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 509(C), pages 316-335.
    4. Ahmadi Balootaki, Azam & Karimipour, Arash & Toghraie, Davood, 2018. "Nano scale lattice Boltzmann method to simulate the mixed convection heat transfer of air in a lid-driven cavity with an endothermic obstacle inside," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 508(C), pages 681-701.
    5. Najafi, Mohammad Javid & Naghavi, Sayed Mahdi & Toghraie, Davood, 2019. "Numerical simulation of flow in hydro turbines channel to improve its efficiency by using of Lattice Boltzmann Method," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 520(C), pages 390-408.
    6. Toghaniyan, Abolfazl & Zarringhalam, Majid & Akbari, Omid Ali & Sheikh Shabani, Gholamreza Ahmadi & Toghraie, Davood, 2018. "Application of lattice Boltzmann method and spinodal decomposition phenomenon for simulating two-phase thermal flows," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 509(C), pages 673-689.
    7. Nemati, Maedeh & Shateri Najaf Abady, Ali Reza & Toghraie, Davood & Karimipour, Arash, 2018. "Numerical investigation of the pseudopotential lattice Boltzmann modeling of liquid–vapor for multi-phase flows," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 489(C), pages 65-77.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Afrouzi, Hamid Hassanzadeh & Ahmadian, Majid & Moshfegh, Abouzar & Toghraie, Davood & Javadzadegan, Ashkan, 2019. "Statistical analysis of pulsating non-Newtonian flow in a corrugated channel using Lattice-Boltzmann method," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 535(C).
    2. Jahangiri, Ali & Mohammadi, Samira & Akbari, Mohammad, 2019. "Modeling the one-dimensional inverse heat transfer problem using a Haar wavelet collocation approach," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 525(C), pages 13-26.
    3. Rasti, Ehsan & Talebi, Farhad & Mazaheri, Kiumars, 2019. "Improvement of drag reduction prediction in viscoelastic pipe flows using proper low-Reynolds k-ε turbulence models," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 516(C), pages 412-422.
    4. Jourabian, Mahmoud & Rabienataj Darzi, A. Ali & Akbari, Omid Ali & Toghraie, Davood, 2020. "The enthalpy-based lattice Boltzmann method (LBM) for simulation of NePCM melting in inclined elliptical annulus," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 548(C).
    5. Oleg Ilyin, 2022. "Low Dissipative Entropic Lattice Boltzmann Method," Mathematics, MDPI, vol. 10(21), pages 1-22, October.
    6. Ezzatneshan, Eslam & Vaseghnia, Hamed, 2020. "Evaluation of equations of state in multiphase lattice Boltzmann method with considering surface wettability effects," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 541(C).
    7. Alsarraf, Jalal & Moradikazerouni, Alireza & Shahsavar, Amin & Afrand, Masoud & Salehipour, Hamzeh & Tran, Minh Duc, 2019. "Hydrothermal analysis of turbulent boehmite alumina nanofluid flow with different nanoparticle shapes in a minichannel heat exchanger using two-phase mixture model," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 520(C), pages 275-288.
    8. Khaje khabaz, Moahamad & Eftekhari, S. Ali & Hashemian, Mohamad & Toghraie, Davood, 2020. "Optimal vibration control of multi-layer micro-beams actuated by piezoelectric layer based on modified couple stress and surface stress elasticity theories," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 546(C).
    9. Ma, Yuan & Mohebbi, Rasul & Rashidi, M.M. & Yang, Zhigang & Sheremet, Mikhail, 2020. "Nanoliquid thermal convection in I-shaped multiple-pipe heat exchanger under magnetic field influence," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 550(C).
    10. Shahsavar, Amin & Bagherzadeh, Seyed Amin & Mahmoudi, Boshra & Hajizadeh, Ahmad & Afrand, Masoud & Nguyen, Truong Khang, 2019. "Robust Weighted Least Squares Support Vector Regression algorithm to estimate the nanofluid thermal properties of water/graphene Oxide–Silicon carbide mixture," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 525(C), pages 1418-1428.
    11. Hassanzadeh Afrouzi, Hamid & Moshfegh, Abouzar & Farhadi, Mousa & Sedighi, Kurosh, 2018. "Dissipative particle dynamics: Effects of thermostating schemes on nano-colloid electrophoresis," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 497(C), pages 285-301.
    12. Karimipour, Arash & D’Orazio, Annunziata & Goodarzi, Marjan, 2018. "Develop the lattice Boltzmann method to simulate the slip velocity and temperature domain of buoyancy forces of FMWCNT nanoparticles in water through a micro flow imposed to the specified heat flux," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 509(C), pages 729-745.
    13. Bagherzadeh, Seyed Amin & D’Orazio, Annunziata & Karimipour, Arash & Goodarzi, Marjan & Bach, Quang-Vu, 2019. "A novel sensitivity analysis model of EANN for F-MWCNTs–Fe3O4/EG nanofluid thermal conductivity: Outputs predicted analytically instead of numerically to more accuracy and less costs," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 521(C), pages 406-415.
    14. Karimipour, Arash & Bagherzadeh, Seyed Amin & Taghipour, Abdolmajid & Abdollahi, Ali & Safaei, Mohammad Reza, 2019. "A novel nonlinear regression model of SVR as a substitute for ANN to predict conductivity of MWCNT-CuO/water hybrid nanofluid based on empirical data," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 521(C), pages 89-97.
    15. Hu, Chunhua & Lai, Shaoyong & Lai, Chong, 2020. "Investigations to the price evolutions of goods exchange with CES utility functions," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 549(C).
    16. Goodarzi, Marjan & D’Orazio, Annunziata & Keshavarzi, Ahmad & Mousavi, Sayedali & Karimipour, Arash, 2018. "Develop the nano scale method of lattice Boltzmann to predict the fluid flow and heat transfer of air in the inclined lid driven cavity with a large heat source inside, Two case studies: Pure natural ," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 509(C), pages 210-233.
    17. Alipour, Pedram & Toghraie, Davood & Karimipour, Arash, 2019. "Investigation the atomic arrangement and stability of the fluid inside a rough nanochannel in both presence and absence of different roughness by using of accurate nano scale simulation," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 524(C), pages 639-660.
    18. Najafi, Mohammad Javid & Naghavi, Sayed Mahdi & Toghraie, Davood, 2019. "Numerical simulation of flow in hydro turbines channel to improve its efficiency by using of Lattice Boltzmann Method," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 520(C), pages 390-408.
    19. Javadzadegan, Ashkan & Joshaghani, Mohammad & Moshfegh, Abouzar & Akbari, Omid Ali & Afrouzi, Hamid Hassanzadeh & Toghraie, Davood, 2020. "Accurate meso-scale simulation of mixed convective heat transfer in a porous media for a vented square with hot elliptic obstacle: An LBM approach," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 537(C).
    20. Tian, Zhe & Arasteh, Hossein & Parsian, Amir & Karimipour, Arash & Safaei, Mohammad Reza & Nguyen, Truong Khang, 2019. "Estimate the shear rate & apparent viscosity of multi-phased non-Newtonian hybrid nanofluids via new developed Support Vector Machine method coupled with sensitivity analysis," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 535(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:phsmap:v:538:y:2020:i:c:s0378437119315262. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/physica-a-statistical-mechpplications/ .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.