IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v288y2024ics0360544223031213.html
   My bibliography  Save this article

Numerical and experimental analysis on convective heat losses from a fully open cylindrical cascaded cavity receiver

Author

Listed:
  • Wasankar, Kushal S.
  • Gulhane, Nitin P.
  • Taler, Jan
  • Taler, Dawid
  • Ocłoń, Paweł
  • Vallati, Andrea

Abstract

A cavity receiver finds substantial application to improve the thermal performance of a solar parabolic dish collector. However, its limited surface area shortens the scope of utilization and bars thermal efficiency. This research has intercepted such problems by including a cascaded cavity receiver, which offers more surface area and high-temperature distributions, representing more heat absorption and utilization to convert into thermal energy. The crucial design of a cascaded receiver consists of two concentric steel cylinders with different heights attached at one end. The design is tested theoretically with the help of CFD analysis, and the heat loss results are compared with the traditional cavity receiver. Furthermore, according to design, an experimental set-up is fabricated, and experimentations are conducted in off-flux mode using an electric heater. The Pyromark coatings minimize radiation losses and implement the working conditions in the lab testing scenario. The convective heat losses estimated reduction of 4.3 % at 0°–24.8 % at 90° due to the application of coatings in the normal cavity and 3.4 % at 0°–16.4 % at 90° due to the application of coatings in the cascaded cavity. Also, the cascaded cavity receiver minimizes 6.98 %–13.93 % convective heat losses compared to traditional cavity receivers.

Suggested Citation

  • Wasankar, Kushal S. & Gulhane, Nitin P. & Taler, Jan & Taler, Dawid & Ocłoń, Paweł & Vallati, Andrea, 2024. "Numerical and experimental analysis on convective heat losses from a fully open cylindrical cascaded cavity receiver," Energy, Elsevier, vol. 288(C).
  • Handle: RePEc:eee:energy:v:288:y:2024:i:c:s0360544223031213
    DOI: 10.1016/j.energy.2023.129727
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544223031213
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.energy.2023.129727?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. de Beer, J.H. & le Roux, W.G. & Sciacovelli, A. & Meyer, J.P., 2023. "Effect of a novel cooling window on a recuperated solar-dish Brayton cycle," Renewable Energy, Elsevier, vol. 208(C), pages 465-480.
    2. Loni, Reyhaneh & Askari Asli-Areh, E. & Ghobadian, B. & Kasaeian, A.B. & Gorjian, Sh. & Najafi, G. & Bellos, Evangelos, 2020. "Research and review study of solar dish concentrators with different nanofluids and different shapes of cavity receiver: Experimental tests," Renewable Energy, Elsevier, vol. 145(C), pages 783-804.
    3. Venkatachalam, Thirunavukkarasu & Cheralathan, M., 2019. "Effect of aspect ratio on thermal performance of cavity receiver for solar parabolic dish concentrator: An experimental study," Renewable Energy, Elsevier, vol. 139(C), pages 573-581.
    4. Xiao, Lan & Guo, Feng-Wei & Wu, Shuang-Ying & Chen, Zhi-Li, 2020. "A comprehensive simulation on optical and thermal performance of a cylindrical cavity receiver in a parabolic dish collector system," Renewable Energy, Elsevier, vol. 145(C), pages 878-892.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hassan, Atazaz & Quanfang, Chen & Abbas, Sajid & Lu, Wu & Youming, Luo, 2021. "An experimental investigation on thermal and optical analysis of cylindrical and conical cavity copper tube receivers design for solar dish concentrator," Renewable Energy, Elsevier, vol. 179(C), pages 1849-1864.
    2. Wang, Ding & Chen, Yuxuan & Xiao, Hu & Zhang, Yanping, 2022. "Effects of geometric and operating parameters on thermal performance of conical cavity receivers using supercritical CO2 as heat transfer fluid," Renewable Energy, Elsevier, vol. 185(C), pages 804-819.
    3. Kasaeian, Alibakhsh & Kouravand, Amir & Vaziri Rad, Mohammad Amin & Maniee, Siavash & Pourfayaz, Fathollah, 2021. "Cavity receivers in solar dish collectors: A geometric overview," Renewable Energy, Elsevier, vol. 169(C), pages 53-79.
    4. Ang, Daniel & Chinnici, Alfonso & Tian, Zhao F. & Saw, Woei L. & Nathan, Graham J., 2022. "Influence of particle loading, Froude and Stokes number on the global thermal performance of a vortex-based solar particle receiver," Renewable Energy, Elsevier, vol. 184(C), pages 201-214.
    5. Chen, Yuxuan & Wang, Ding & Zou, Chongzhe & Gao, Wei & Zhang, Yanping, 2022. "Thermal performance and thermal stress analysis of a supercritical CO2 solar conical receiver under different flow directions," Energy, Elsevier, vol. 246(C).
    6. Zhang, Xueyan & Gao, Teng & Liu, Yang & Chen, Fei, 2023. "Construction and concentrating performance of a critically truncated compound parabolic concentrator without light escape," Energy, Elsevier, vol. 269(C).
    7. Li, Xueling & Li, Renfu & Chang, Huawei & Zeng, Lijian & Xi, Zhaojun & Li, Yichao, 2022. "Numerical simulation of a cavity receiver enhanced with transparent aerogel for parabolic dish solar power generation," Energy, Elsevier, vol. 246(C).
    8. Shoeibi, Shahin & Rahbar, Nader & Esfahlani, Ahad Abedini & Kargarsharifabad, Hadi, 2021. "Energy matrices, exergoeconomic and enviroeconomic analysis of air-cooled and water-cooled solar still: Experimental investigation and numerical simulation," Renewable Energy, Elsevier, vol. 171(C), pages 227-244.
    9. Rajan, Abhinav & Reddy, K.S., 2023. "Integrated optical and thermal model to investigate the performance of a solar parabolic dish collector coupled with a cavity receiver," Renewable Energy, Elsevier, vol. 219(P1).
    10. Chen, Jinli & Xiao, Gang & Xu, Haoran & Zhou, Xin & Yang, Jiamin & Ni, Mingjiang & Cen, Kefa, 2022. "Experiment and dynamic simulation of a solar tower collector system for power generation," Renewable Energy, Elsevier, vol. 196(C), pages 946-958.
    11. Fang, Shibiao & Mu, Lin & Tu, Wenrong, 2021. "Application design and assessment of a novel small-decentralized solar distillation device based on energy, exergy, exergoeconomic, and enviroeconomic parameters," Renewable Energy, Elsevier, vol. 164(C), pages 1350-1363.
    12. Zuo, Hongyan & Tan, Jiqiu & Wei, Kexiang & Huang, Zhonghua & Zhong, Dingqing & Xie, Fuchun, 2021. "Effects of different poses and wind speeds on wind-induced vibration characteristics of a dish solar concentrator system," Renewable Energy, Elsevier, vol. 168(C), pages 1308-1326.
    13. Gharzi, Mostafa & Kermani, Ali M. & Tash Shamsabadi, Hosseinali, 2023. "Experimental investigation of a parabolic trough collector-thermoelectric generator (PTC-TEG) hybrid solar system with a pressurized heat transfer fluid," Renewable Energy, Elsevier, vol. 202(C), pages 270-279.
    14. Amir Hossein Arkian & Gholamhassan Najafi & Shiva Gorjian & Reyhaneh Loni & Evangelos Bellos & Talal Yusaf, 2019. "Performance Assessment of a Solar Dryer System Using Small Parabolic Dish and Alumina/Oil Nanofluid: Simulation and Experimental Study," Energies, MDPI, vol. 12(24), pages 1-22, December.
    15. Okonkwo, Eric C. & Abdullatif, Yasser M. & AL-Ansari, Tareq, 2021. "A nanomaterial integrated technology approach to enhance the energy-water-food nexus," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    16. Thirunavukkarasu, V. & Cheralathan, M., 2020. "An experimental study on energy and exergy performance of a spiral tube receiver for solar parabolic dish concentrator," Energy, Elsevier, vol. 192(C).
    17. Yan, Jian & Peng, YouDuo & Liu, YongXiang, 2023. "Optical performance evaluation of a large solar dish/Stirling power generation system under self-weight load based on optical-mechanical integration method," Energy, Elsevier, vol. 264(C).
    18. Martínez-Manuel, Leopoldo & Wang, Wujun & Laumert, Björn & Peña-Cruz, Manuel I., 2021. "Numerical analysis on the optical geometrical optimization for an axial type impinging solar receiver," Energy, Elsevier, vol. 216(C).
    19. Vaziri Rad, Mohammad Amin & Kasaeian, Alibakhsh & Mousavi, Soroush & Rajaee, Fatemeh & Kouravand, Amir, 2021. "Empirical investigation of a photovoltaic-thermal system with phase change materials and aluminum shavings porous media," Renewable Energy, Elsevier, vol. 167(C), pages 662-675.
    20. Rostami, Mohsen & Pirvaram, Atousa & Talebzadeh, Nima & O’Brien, Paul G., 2021. "Numerical evaluation of one-dimensional transparent photonic crystal heat mirror coatings for parabolic dish concentrator receivers," Renewable Energy, Elsevier, vol. 171(C), pages 1202-1212.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:288:y:2024:i:c:s0360544223031213. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.