IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v266y2023ics0360544222033199.html
   My bibliography  Save this article

Experimental and numerical investigation of an innovative non-combustion impulse gas turbine for micro-scale electricity generation

Author

Listed:
  • Liaw, Kim Leong
  • Ong, Khai Chuin
  • Mohd Ali Zar, Muhammad Aliff B.
  • Lai, Wen Kang
  • Muhammad, M. Fadhli B.
  • Firmansyah,
  • Kurnia, Jundika C.

Abstract

Fulfilling electricity demand in a remote platform has been a great challenge for oil and gas industry. With only pressurized gas line available, the choice of technology that can be implemented is limited; one of it is impulse gas turbine. At the moment, no studies investigating the performance of a compact impulse gas turbine which utilizes pressurized gas line has been reported, hindering the wide adoption of this technology. This study is therefore conducted with the main objective to investigate the performance of small scale impulse gas turbine for electricity generation by using computational fluid dynamics (CFD) approach in tandem with experimental validation. Three-dimensional computational model for the turbine is developed. Concurrently, an experimental set-up, consisting of micro impulse gas turbine, electric generator, flow loop and control system, is prepared to validate the model prediction. The effect of several key parameters, such as working fluid, rotational speed, mass flow rate and input pressure are evaluated to obtain operating envelope of the turbine. Overall, good agreement is achieved between numerical model prediction and experimental measured value. On the effect of working fluid, the results indicate that the impulse gas turbine driven by natural gas at 69 bar produce maximum power output of 1743.81 W at lower speed of 4500 RPM while maximum power of 1084.04 W can be achieved when driven by compressed air at 19 bar at rotational speed of 7000 RPM. In addition, a complete operating envelope for the turbine operating with either compressed air or natural gas has been developed. Furthermore, the effect of distance between nozzle outlet and turbine blade has been evaluated for which the optimum distance within studied range is obtained: 49.62 mm for one with compressed air and 54.62 mm for one with natural gas. The result from this study is expected to serve as a guideline in designing micro impulse gas turbine for electricity generation especially for remote offshore platform.

Suggested Citation

  • Liaw, Kim Leong & Ong, Khai Chuin & Mohd Ali Zar, Muhammad Aliff B. & Lai, Wen Kang & Muhammad, M. Fadhli B. & Firmansyah, & Kurnia, Jundika C., 2023. "Experimental and numerical investigation of an innovative non-combustion impulse gas turbine for micro-scale electricity generation," Energy, Elsevier, vol. 266(C).
    • Handle: RePEc:eee:energy:v:266:y:2023:i:c:s0360544222033199
    DOI: 10.1016/j.energy.2022.126433
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544222033199
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2022.126433?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Fuhaid Alshammari & Apostolos Karvountzis-Kontakiotis & Apostolos Pesyridis & Muhammad Usman, 2018. "Expander Technologies for Automotive Engine Organic Rankine Cycle Applications," Energies, MDPI, vol. 11(7), pages 1-36, July.
    2. Nguyen, Tuong-Van & Barbosa, Yuri M. & da Silva, Julio A.M. & de Oliveira Junior, Silvio, 2019. "A novel methodology for the design and optimisation of oil and gas offshore platforms," Energy, Elsevier, vol. 185(C), pages 158-175.
    3. Kang, Seok Hun, 2016. "Design and preliminary tests of ORC (organic Rankine cycle) with two-stage radial turbine," Energy, Elsevier, vol. 96(C), pages 142-154.
    4. Wang, Jiangfeng & Yan, Zhequan & Wang, Man & Ma, Shaolin & Dai, Yiping, 2013. "Thermodynamic analysis and optimization of an (organic Rankine cycle) ORC using low grade heat source," Energy, Elsevier, vol. 49(C), pages 356-365.
    5. Meroni, Andrea & Andreasen, Jesper Graa & Persico, Giacomo & Haglind, Fredrik, 2018. "Optimization of organic Rankine cycle power systems considering multistage axial turbine design," Applied Energy, Elsevier, vol. 209(C), pages 339-354.
    6. Pashchenko, Dmitry, 2022. "Natural gas reforming in thermochemical waste-heat recuperation systems: A review," Energy, Elsevier, vol. 251(C).
    7. Yu, Xiao & Sandhu, Navjot S. & Yang, Zhenyi & Zheng, Ming, 2020. "Suitability of energy sources for automotive application – A review," Applied Energy, Elsevier, vol. 271(C).
    8. Pashchenko, Dmitry & Mustafin, Ravil & Karpilov, Igor, 2022. "Ammonia-fired chemically recuperated gas turbine: Thermodynamic analysis of cycle and recuperation system," Energy, Elsevier, vol. 252(C).
    9. Kadhim, Hakim T. & Rona, Aldo, 2018. "Off-design performance of a liquefied natural gas plant with an axial turbine of novel endwall design," Applied Energy, Elsevier, vol. 222(C), pages 830-839.
    10. Sun, Hongchuang & Qin, Jiang & Hung, Tzu-Chen & Huang, Hongyan & Yan, Peigang, 2019. "Performance analysis of low speed axial impulse turbine using two type nozzles for small-scale organic Rankine cycle," Energy, Elsevier, vol. 169(C), pages 1139-1152.
    11. Huang, Guangdai & Shu, Gequn & Tian, Hua & Shi, Lingfeng & Zhuge, Weilin & Tao, Lin, 2019. "Experiments on a small-scale axial turbine expander used in CO2 transcritical power cycle," Applied Energy, Elsevier, vol. 255(C).
    12. Sauret, Emilie & Gu, Yuantong, 2014. "Three-dimensional off-design numerical analysis of an organic Rankine cycle radial-inflow turbine," Applied Energy, Elsevier, vol. 135(C), pages 202-211.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liaw, Kim Leong & Kurnia, Jundika C. & Lai, Wen Kang & Ong, Khai Chuin & Zar, Muhammad Aliff B. Mohd Ali & Muhammad, M. Fadhli B. & Firmansyah,, 2023. "Optimization of a novel impulse gas turbine nozzle and blades design utilizing Taguchi method for micro-scale power generation," Energy, Elsevier, vol. 282(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Meroni, Andrea & Robertson, Miles & Martinez-Botas, Ricardo & Haglind, Fredrik, 2018. "A methodology for the preliminary design and performance prediction of high-pressure ratio radial-inflow turbines," Energy, Elsevier, vol. 164(C), pages 1062-1078.
    2. Pashchenko, Dmitry, 2023. "Hydrogen-rich gas as a fuel for the gas turbines: A pathway to lower CO2 emission," Renewable and Sustainable Energy Reviews, Elsevier, vol. 173(C).
    3. Bai, Zhang & Yuan, Yu & Kong, Debin & Zhou, Shengdong & Li, Qi & Wang, Shuoshuo, 2023. "Potential of applying the thermochemical recuperation in combined cooling, heating and power generation: Off-design operation performance," Applied Energy, Elsevier, vol. 348(C).
    4. Da Lio, Luca & Manente, Giovanni & Lazzaretto, Andrea, 2017. "A mean-line model to predict the design efficiency of radial inflow turbines in organic Rankine cycle (ORC) systems," Applied Energy, Elsevier, vol. 205(C), pages 187-209.
    5. Kaczmarczyk, Tomasz Z. & Żywica, Grzegorz & Ihnatowicz, Eugeniusz, 2017. "The impact of changes in the geometry of a radial microturbine stage on the efficiency of the micro CHP plant based on ORC," Energy, Elsevier, vol. 137(C), pages 530-543.
    6. Pashchenko, Dmitry & Mustafin, Ravil & Karpilov, Igor, 2022. "Thermochemical recuperation by steam methane reforming as an efficient alternative to steam injection in the gas turbines," Energy, Elsevier, vol. 258(C).
    7. Liaw, Kim Leong & Kurnia, Jundika C. & Lai, Wen Kang & Ong, Khai Chuin & Zar, Muhammad Aliff B. Mohd Ali & Muhammad, M. Fadhli B. & Firmansyah,, 2023. "Optimization of a novel impulse gas turbine nozzle and blades design utilizing Taguchi method for micro-scale power generation," Energy, Elsevier, vol. 282(C).
    8. Peng, Ningjian & Wang, Enhua & Wang, Wenli, 2023. "Design and analysis of a 1.5 kW single-stage partial-admission impulse turbine for low-grade energy utilization," Energy, Elsevier, vol. 268(C).
    9. Al Jubori, Ayad M. & Al-Dadah, Raya K. & Mahmoud, Saad & Daabo, Ahmed, 2017. "Modelling and parametric analysis of small-scale axial and radial-outflow turbines for Organic Rankine Cycle applications," Applied Energy, Elsevier, vol. 190(C), pages 981-996.
    10. He, W.F. & Ji, C. & Han, D. & Wu, Y.K. & Huang, L. & Zhang, X.K., 2017. "Performance analysis of the mechanical vapor compression desalination system driven by an organic Rankine cycle," Energy, Elsevier, vol. 141(C), pages 1177-1186.
    11. Du, Yang & Dai, Yiping, 2018. "Off-design performance analysis of a power-cooling cogeneration system combining a Kalina cycle with an ejector refrigeration cycle," Energy, Elsevier, vol. 161(C), pages 233-250.
    12. He, Chao & Liu, Chao & Zhou, Mengtong & Xie, Hui & Xu, Xiaoxiao & Wu, Shuangying & Li, Yourong, 2014. "A new selection principle of working fluids for subcritical organic Rankine cycle coupling with different heat sources," Energy, Elsevier, vol. 68(C), pages 283-291.
    13. Maksymilian Mądziel, 2024. "Quantifying Emissions in Vehicles Equipped with Energy-Saving Start–Stop Technology: THC and NOx Modeling Insights," Energies, MDPI, vol. 17(12), pages 1-25, June.
    14. Bamorovat Abadi, Gholamreza & Kim, Kyung Chun, 2017. "Investigation of organic Rankine cycles with zeotropic mixtures as a working fluid: Advantages and issues," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 1000-1013.
    15. Luo, Xianglong & Yi, Zhitong & Zhang, Bingjian & Mo, Songping & Wang, Chao & Song, Mengjie & Chen, Ying, 2017. "Mathematical modelling and optimization of the liquid separation condenser used in organic Rankine cycle," Applied Energy, Elsevier, vol. 185(P2), pages 1309-1323.
    16. Adams, Benjamin M. & Kuehn, Thomas H. & Bielicki, Jeffrey M. & Randolph, Jimmy B. & Saar, Martin O., 2015. "A comparison of electric power output of CO2 Plume Geothermal (CPG) and brine geothermal systems for varying reservoir conditions," Applied Energy, Elsevier, vol. 140(C), pages 365-377.
    17. Tang, Yuanyou & Wang, Yang & Long, Wuqiang & Xiao, Ge & Wang, Yongjian & Li, Weixing, 2023. "Analysis and enhancement of methanol reformer performance for online reforming based on waste heat recovery of methanol-diesel dual direct injection engine," Energy, Elsevier, vol. 283(C).
    18. Kim, Dong Kyu & Lee, Ji Sung & Kim, Jinwoo & Kim, Mo Se & Kim, Min Soo, 2017. "Parametric study and performance evaluation of an organic Rankine cycle (ORC) system using low-grade heat at temperatures below 80°C," Applied Energy, Elsevier, vol. 189(C), pages 55-65.
    19. Yang, Min-Hsiung & Yeh, Rong-Hua, 2015. "Thermo-economic optimization of an organic Rankine cycle system for large marine diesel engine waste heat recovery," Energy, Elsevier, vol. 82(C), pages 256-268.
    20. Khaljani, M. & Khoshbakhti Saray, R. & Bahlouli, K., 2015. "Thermodynamic and thermoeconomic optimization of an integrated gas turbine and organic Rankine cycle," Energy, Elsevier, vol. 93(P2), pages 2136-2145.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:266:y:2023:i:c:s0360544222033199. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.