IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v235y2019icp473-479.html
   My bibliography  Save this article

PdCu/C anode catalysts for the alkaline ascorbate fuel cell

Author

Listed:
  • Muneeb, Omar
  • Do, Emily
  • Boyd, Desiree
  • Perez, Josh
  • Haan, John L.

Abstract

In this work, PdCu/C catalysts are used to increase the power output of an alkaline ascorbate fuel cell using an alkaline anion exchange membrane. The alkaline ascorbate fuel cell produces significantly more power than a direct ascorbic acid fuel cell using an acidic cation exchange membrane. However, that alkaline ascorbate fuel cell employs Pd catalyst at the anode. Since addition of Cu to a Pd catalyst results in higher oxidation rates for polyalcohol oxidation in alkaline media, we add Cu to this Pd catalyst to study its impact on ascorbate oxidation in alkaline media. The ascorbate fuel cell maximum power density increases from 53 mW cm−2 when Pd/C is used at the anode to 89 mW cm−2 when Pd28Cu72/C is used. Per mass of Pd, the Pd/C anode produces only 32 mW mg−1 while the Pd28Cu72/C anode produces 194 mW mg−1. Electrochemical analysis of various PdCu/C catalysts shows that the current density after oxidation at −0.4 V for 1 h increases with the addition of greater quantities of Cu to the Pd catalyst, from 0.111 mA cm−2 on Pd/C to 0.757 mA cm−2 on Pd11Cu89/C. This increase in catalytic efficiency when Cu is added to the Pd catalyst is attributed to a combination of the electronic and bifunctional effects.

Suggested Citation

  • Muneeb, Omar & Do, Emily & Boyd, Desiree & Perez, Josh & Haan, John L., 2019. "PdCu/C anode catalysts for the alkaline ascorbate fuel cell," Applied Energy, Elsevier, vol. 235(C), pages 473-479.
    • Handle: RePEc:eee:appene:v:235:y:2019:i:c:p:473-479
    DOI: 10.1016/j.apenergy.2018.10.073
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261918316416
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2018.10.073?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Wang, L.Q. & Bellini, M. & Filippi, J. & Folliero, M. & Lavacchi, A. & Innocenti, M. & Marchionni, A. & Miller, H.A. & Vizza, F., 2016. "Energy efficiency of platinum-free alkaline direct formate fuel cells," Applied Energy, Elsevier, vol. 175(C), pages 479-487.
    2. Saric, Steven & Biggs, Brenna & Janbahan, Mika & Hamilton, Ryan & Do, Huy K. & Mayoral, Salvador & Haan, John L., 2016. "An integrated device to convert carbon dioxide to energy," Applied Energy, Elsevier, vol. 183(C), pages 1346-1350.
    3. Zeng, L. & Tang, Z.K. & Zhao, T.S., 2014. "A high-performance alkaline exchange membrane direct formate fuel cell," Applied Energy, Elsevier, vol. 115(C), pages 405-410.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chino, Isabel & Hendrix, Kimberly & Keramati, Abtin & Muneeb, Omar & Haan, John L., 2019. "A split pH direct liquid fuel cell powered by propanol or glycerol," Applied Energy, Elsevier, vol. 251(C), pages 1-1.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hamish Andrew Miller & Jacopo Ruggeri & Andrea Marchionni & Marco Bellini & Maria Vincenza Pagliaro & Carlo Bartoli & Andrea Pucci & Elisa Passaglia & Francesco Vizza, 2018. "Improving the Energy Efficiency of Direct Formate Fuel Cells with a Pd/C-CeO 2 Anode Catalyst and Anion Exchange Ionomer in the Catalyst Layer," Energies, MDPI, vol. 11(2), pages 1-12, February.
    2. Zhang, Xiaowen & Zhang, Xin & Liu, Helei & Li, Wensheng & Xiao, Min & Gao, Hongxia & Liang, Zhiwu, 2017. "Reduction of energy requirement of CO2 desorption from a rich CO2-loaded MEA solution by using solid acid catalysts," Applied Energy, Elsevier, vol. 202(C), pages 673-684.
    3. Ghosh, Arpita & Chandran, Priji & Ramaprabhu, S., 2017. "Palladium-nitrogen coordinated cobalt alloy towards hydrogen oxidation and oxygen reduction reactions with high catalytic activity in renewable energy generations of proton exchange membrane fuel cell," Applied Energy, Elsevier, vol. 208(C), pages 37-48.
    4. Ali Saleh Bairq, Zain & Gao, Hongxia & Huang, Yufei & Zhang, Haiyan & Liang, Zhiwu, 2019. "Enhancing CO2 desorption performance in rich MEA solution by addition of SO42−/ZrO2/SiO2 bifunctional catalyst," Applied Energy, Elsevier, vol. 252(C), pages 1-1.
    5. Ba Hung, Nguyen & Jaewon, Sung & Lim, Ocktaeck, 2017. "A study of the effects of input parameters on the dynamics and required power of an electric bicycle," Applied Energy, Elsevier, vol. 204(C), pages 1347-1362.
    6. Chao, Shujun & Zhang, Yatian & Wang, Kui & Bai, Zhengyu & Yang, Lin, 2016. "Flower–like Ni and N codoped hierarchical porous carbon microspheres with enhanced performance for fuel cell storage," Applied Energy, Elsevier, vol. 175(C), pages 421-428.
    7. Anelli, Debora & Tajani, Francesco, 2023. "Spatial decision support systems for effective ex-ante risk evaluation: An innovative model for improving the real estate redevelopment processes," Land Use Policy, Elsevier, vol. 128(C).
    8. Nandan, Ravi & Goswami, Gopal Krishna & Nanda, Karuna Kar, 2017. "Direct synthesis of Pt-free catalyst on gas diffusion layer of fuel cell and usage of high boiling point fuels for efficient utilization of waste heat," Applied Energy, Elsevier, vol. 205(C), pages 1050-1058.
    9. Saric, Steven & Biggs, Brenna & Janbahan, Mika & Hamilton, Ryan & Do, Huy K. & Mayoral, Salvador & Haan, John L., 2016. "An integrated device to convert carbon dioxide to energy," Applied Energy, Elsevier, vol. 183(C), pages 1346-1350.
    10. Chen, S.J. & Zhu, M. & Fu, Y. & Huang, Y.X. & Tao, Z.C. & Li, W.L., 2017. "Using 13X, LiX, and LiPdAgX zeolites for CO2 capture from post-combustion flue gas," Applied Energy, Elsevier, vol. 191(C), pages 87-98.
    11. Yue, Pengtao & Kang, Zhongyin & Fu, Qian & Li, Jun & Zhang, Liang & Zhu, Xun & Liao, Qiang, 2021. "Life cycle and economic analysis of chemicals production via electrolytic (bi)carbonate and gaseous CO2 conversion," Applied Energy, Elsevier, vol. 304(C).
    12. Zhong, Kengqiang & Li, Meng & Yang, Yue & Zhang, Hongguo & Zhang, Bopeng & Tang, Jinfeng & Yan, Jia & Su, Minhua & Yang, Zhiquan, 2019. "Nitrogen-doped biochar derived from watermelon rind as oxygen reduction catalyst in air cathode microbial fuel cells," Applied Energy, Elsevier, vol. 242(C), pages 516-525.
    13. Deng, Hao & Wang, Dawei & Wang, Renfang & Xie, Xu & Yin, Yan & Du, Qing & Jiao, Kui, 2016. "Effect of electrode design and operating condition on performance of hydrogen alkaline membrane fuel cell," Applied Energy, Elsevier, vol. 183(C), pages 1272-1278.
    14. Do-Hyeong Kim & Moon-Sung Kang, 2020. "Pore-Filled Anion-Exchange Membranes with Double Cross-Linking Structure for Fuel Cells and Redox Flow Batteries," Energies, MDPI, vol. 13(18), pages 1-16, September.
    15. Wang, L.Q. & Bellini, M. & Filippi, J. & Folliero, M. & Lavacchi, A. & Innocenti, M. & Marchionni, A. & Miller, H.A. & Vizza, F., 2016. "Energy efficiency of platinum-free alkaline direct formate fuel cells," Applied Energy, Elsevier, vol. 175(C), pages 479-487.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:235:y:2019:i:c:p:473-479. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.