IDEAS home Printed from https://ideas.repec.org/a/eee/appene/v207y2017icp604-612.html
   My bibliography  Save this article

Experimental validation and numeric optimization of a resonance tube-coupled duplex Stirling cooler

Author

Listed:
  • Li, Xiaowei
  • Liu, Bin
  • Yu, Guoyao
  • Dai, Wei
  • Hu, Jianying
  • Luo, Ercang
  • Li, Haibing

Abstract

Combining thermoacoustic concepts with free piston Stirling systems, this paper puts forward a resonance tube-coupled duplex Stirling cooler which is thermally driven. The novel configuration consists of a free piston Stirling engine, a free piston Stirling cooler and a resonance tube to couple them. Possessing advantages of high exergy efficiency, high reliability and simple structure, it serves as a promising candidate for small scale natural gas liquefaction by burning a small part of natural gas to liquefy the rest and long lifetime space coolers. Using the off-the-shelf components in our laboratory, an experimental setup has been built and a no-load temperature of 110Khas been achieved. As the feasibility of the concept has been verified experimentally, further calculation was done to explore the potential of the configuration. Based on Sage software, the engine and the cooler subsystem were optimized respectively, then a system level numeric model was established and the performance of the system was studied. Among the numeric results, a heat-to-cooling-power exergy efficiency of 26.8% and a cooling power of 2.4kW were obtained at 110K with an inner diameter 60mm resonance tube, charging pressure of 6MPa, hot temperature of 923K, ambient temperature of 303K, working frequency of 75Hz.

Suggested Citation

  • Li, Xiaowei & Liu, Bin & Yu, Guoyao & Dai, Wei & Hu, Jianying & Luo, Ercang & Li, Haibing, 2017. "Experimental validation and numeric optimization of a resonance tube-coupled duplex Stirling cooler," Applied Energy, Elsevier, vol. 207(C), pages 604-612.
    • Handle: RePEc:eee:appene:v:207:y:2017:i:c:p:604-612
    DOI: 10.1016/j.apenergy.2017.05.123
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0306261917306633
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.apenergy.2017.05.123?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Xu, Jingyuan & Hu, Jianying & Zhang, Limin & Dai, Wei & Luo, Ercang, 2015. "Effect of coupling position on a looped three-stage thermoacoustically-driven pulse tube cryocooler," Energy, Elsevier, vol. 93(P1), pages 994-998.
    2. Li, Linyu & Wu, Zhanghua & Hu, Jianying & Yu, Guoyao & Luo, Ercang & Dai, Wei, 2016. "A novel heat-driven thermoacoustic natural gas liquefaction system. Part I: Coupling between refrigerator and linear motor," Energy, Elsevier, vol. 117(P2), pages 523-529.
    3. Hu, J.Y. & Luo, E.C. & Dai, W. & Zhang, L.M., 2017. "Parameter sensitivity analysis of duplex Stirling coolers," Applied Energy, Elsevier, vol. 190(C), pages 1039-1046.
    4. Hu, J.Y. & Chen, S. & Zhu, J. & Zhang, L.M. & Luo, E.C. & Dai, W. & Li, H.B., 2016. "An efficient pulse tube cryocooler for boil-off gas reliquefaction in liquid natural gas tanks," Applied Energy, Elsevier, vol. 164(C), pages 1012-1018.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Sun, Haojie & Yu, Guoyao & Dai, Wei & Zhang, Limin & Luo, Ercang, 2022. "Dynamic and thermodynamic characterization of a resonance tube-coupled free-piston Stirling engine-based combined cooling and power system," Applied Energy, Elsevier, vol. 322(C).
    2. Xiao, Lei & Luo, Kaiqi & Chi, Jiaxin & Chen, Geng & Wu, Zhanghua & Luo, Ercang & Xu, Jingyuan, 2023. "Study on a direct-coupling thermoacoustic refrigerator using time-domain acoustic-electrical analogy method," Applied Energy, Elsevier, vol. 339(C).
    3. Xiao, Lei & Luo, Kaiqi & Zhao, Dan & Chen, Geng & Bi, Tianjiao & Xu, Jingyuan & Luo, Ercang, 2023. "Time-domain acoustic-electrical analogy investigation on a high-power traveling-wave thermoacoustic electric generator," Energy, Elsevier, vol. 263(PE).
    4. Armando Di Meglio & Nicola Massarotti, 2022. "CFD Modeling of Thermoacoustic Energy Conversion: A Review," Energies, MDPI, vol. 15(10), pages 1-38, May.
    5. Yang, Rui & Wang, Junxiang & Luo, Ercang, 2023. "Revisiting the evaporative Stirling engine: The mechanism and a case study via thermoacoustic theory," Energy, Elsevier, vol. 273(C).
    6. Luo, Kaiqi & Luo, Ercang & Xie, Xiaoyun & Jiang, Yi, 2024. "A highly efficient heat-driven thermoacoustic system for room-temperature refrigeration by using novel configuration," Applied Energy, Elsevier, vol. 357(C).
    7. Wang, Xin & Xu, Jingyuan & Wu, Zhanghua & Luo, Ercang, 2022. "A thermoacoustic refrigerator with multiple-bypass expansion cooling configuration for natural gas liquefaction," Applied Energy, Elsevier, vol. 313(C).
    8. Chang, Depeng & Hu, Jianying & Sun, Yanlei & Zhang, Limin & Chen, Yanyan & Luo, Ercang, 2023. "Numerical investigation on key parameters of a double-acting free piston Stirling generator," Energy, Elsevier, vol. 278(PB).
    9. Cao, Qiang & Sun, Zheng & Li, Zimu & Luan, Mingkai & Tang, Xiao & Li, Peng & Jiang, Zhenhua & Wei, Li, 2019. "Reduction of real gas losses with a DC flow in the regenerator of the refrigeration cycle," Applied Energy, Elsevier, vol. 235(C), pages 139-146.
    10. Xu, Jingyuan & Luo, Ercang & Hochgreb, Simone, 2021. "A thermoacoustic combined cooling, heating, and power (CCHP) system for waste heat and LNG cold energy recovery," Energy, Elsevier, vol. 227(C).
    11. Xu, Jingyuan & Luo, Ercang & Hochgreb, Simone, 2020. "Study on a heat-driven thermoacoustic refrigerator for low-grade heat recovery," Applied Energy, Elsevier, vol. 271(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Hu, J.Y. & Luo, E.C. & Zhang, L.M. & Chen, Y.Y. & Wu, Z.H. & Gao, B., 2018. "Analysis of a displacer-coupled multi-stage thermoacoustic-Stirling engine," Energy, Elsevier, vol. 145(C), pages 507-514.
    2. Sun, Haojie & Yu, Guoyao & Dai, Wei & Zhang, Limin & Luo, Ercang, 2022. "Dynamic and thermodynamic characterization of a resonance tube-coupled free-piston Stirling engine-based combined cooling and power system," Applied Energy, Elsevier, vol. 322(C).
    3. Wang, Xin & Xu, Jingyuan & Wu, Zhanghua & Luo, Ercang, 2022. "A thermoacoustic refrigerator with multiple-bypass expansion cooling configuration for natural gas liquefaction," Applied Energy, Elsevier, vol. 313(C).
    4. Ahmed Hamood & Artur J. Jaworski & Xiaoan Mao, 2019. "Development and Assessment of Two-Stage Thermoacoustic Electricity Generator," Energies, MDPI, vol. 12(9), pages 1-18, May.
    5. Xu, Jingyuan & Zhang, Limin & Hu, Jianying & Wu, Zhanghua & Bi, Tianjiao & Dai, Wei & Luo, Ercang, 2016. "An efficient looped multiple-stage thermoacoustically-driven cryocooler for liquefaction and recondensation of natural gas," Energy, Elsevier, vol. 101(C), pages 427-433.
    6. Liu, Shaoshuai & Chen, Xi & Zhang, Ankuo & Jiang, Zhenhua & Wu, Yinong & Zhang, Hua, 2017. "Investigation of the inertance tube of a pulse tube refrigerator operating at high temperatures," Energy, Elsevier, vol. 123(C), pages 378-385.
    7. Wang, Cheng & Ju, Yonglin & Fu, Yunzhun, 2021. "Comparative life cycle cost analysis of low pressure fuel gas supply systems for LNG fueled ships," Energy, Elsevier, vol. 218(C).
    8. Cao, Qiang, 2018. "Attainability of the Carnot efficiency with real gases in the regenerator of the refrigeration cycle," Applied Energy, Elsevier, vol. 220(C), pages 705-712.
    9. Saechan, Patcharin & Jaworski, Artur J., 2019. "Numerical studies of co-axial travelling-wave thermoacoustic cooler powered by standing-wave thermoacoustic engine," Renewable Energy, Elsevier, vol. 139(C), pages 600-610.
    10. Li, Xuerong & Shang, Wei & Wang, Shouyang, 2019. "Text-based crude oil price forecasting: A deep learning approach," International Journal of Forecasting, Elsevier, vol. 35(4), pages 1548-1560.
    11. Cao, Qiang & Sun, Zheng & Li, Zimu & Luan, Mingkai & Tang, Xiao & Li, Peng & Jiang, Zhenhua & Wei, Li, 2019. "Reduction of real gas losses with a DC flow in the regenerator of the refrigeration cycle," Applied Energy, Elsevier, vol. 235(C), pages 139-146.
    12. Chang, Depeng & Hu, Jianying & Sun, Yanlei & Zhang, Limin & Chen, Yanyan & Luo, Ercang, 2023. "Numerical investigation on key parameters of a double-acting free piston Stirling generator," Energy, Elsevier, vol. 278(PB).
    13. Hinze, Jacob F. & Nellis, Gregory F. & Anderson, Mark H., 2017. "Cost comparison of printed circuit heat exchanger to low cost periodic flow regenerator for use as recuperator in a s-CO2 Brayton cycle," Applied Energy, Elsevier, vol. 208(C), pages 1150-1161.
    14. Al-Kayiem, Ali & Yu, Zhibin, 2016. "Numerical investigation of a looped-tube travelling-wave thermoacoustic engine with a bypass pipe," Energy, Elsevier, vol. 112(C), pages 111-120.
    15. Wang, Kai & Dubey, Swapnil & Choo, Fook Hoong & Duan, Fei, 2017. "Thermoacoustic Stirling power generation from LNG cold energy and low-temperature waste heat," Energy, Elsevier, vol. 127(C), pages 280-290.
    16. Xu, Jingyuan & Luo, Ercang & Hochgreb, Simone, 2021. "A thermoacoustic combined cooling, heating, and power (CCHP) system for waste heat and LNG cold energy recovery," Energy, Elsevier, vol. 227(C).
    17. Chen, Geng & Tang, Lihua & Mace, Brian & Yu, Zhibin, 2021. "Multi-physics coupling in thermoacoustic devices: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 146(C).
    18. Xu, Jingyuan & Yu, Guoyao & Zhang, Limin & Dai, Wei & Luo, Ercang, 2017. "Theoretical analysis of two coupling modes of a 300-Hz three-stage thermoacoustically driven cryocooler system at liquid nitrogen temperature range," Applied Energy, Elsevier, vol. 185(P2), pages 2134-2141.
    19. Xu, Jingyuan & Luo, Ercang & Hochgreb, Simone, 2020. "Study on a heat-driven thermoacoustic refrigerator for low-grade heat recovery," Applied Energy, Elsevier, vol. 271(C).
    20. Biglia, Alessandro & Bilardo, Matteo & Comba, Lorenzo & Ricauda Aimonino, Davide & Grella, Marco & Fabrizio, Enrico & Gay, Paolo, 2024. "Performance analysis of a nitrogen-based Brayton cryocooler prototype," Energy, Elsevier, vol. 290(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:appene:v:207:y:2017:i:c:p:604-612. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.