IDEAS home Printed from https://ideas.repec.org/a/bla/inecol/v25y2021i4p1009-1020.html
   My bibliography  Save this article

Material flow analysis of zinc during the manufacturing process in integrated steel mills in China

Author

Listed:
  • Yuhua Guo
  • Junmao Qie
  • Chunxia Zhang
  • Yuantao Yang

Abstract

The steel manufacturing process involves not only the substance flow of iron from iron‐bearing materials to steel products but also the circulation and movement of many additional elements. In this study, the flow and circulation of zinc during coking, sintering, blast furnace (BF) ironmaking, basic oxygen furnace (BOF) steelmaking, and continuous casting processes, which has been neglected, was analyzed in an integrated iron and steel mill throughout 2013. The results indicated that approximately 2,317 tonnes (t) of zinc from steelmaking raw materials were input into the studied steel mill in 2013, of which 58.8% originated from iron ore fines, 22.3% from pellets, and 8.8% from lumps. Although 1,212 t of zinc was discharged along with coking chemical products and steel slag after magnetic separation or iron‐bearing dust and sludge, 1,105 t of zinc remained within the circulation. According to this research, we inferred that approximately 142 kilotonnes of zinc, 2.7% of China's zinc production in 2013, and approximately 1.5 million tonnes in total from 2000 to 2017 were concentrated in BF and BOF dust or sludge. This large amount of zinc has been ignored by Chinese steelmakers and zinc producers, although it should be used as a resource for zinc recycling. Thus, integrated steel mills should develop pertinent treatments targeting these fractions to prevent and handle the hazards from the circulation and concentration of zinc inside their premises. This article met the requirements for a silver–silver JIE data openness badge described at http://jie.click/badges.

Suggested Citation

  • Yuhua Guo & Junmao Qie & Chunxia Zhang & Yuantao Yang, 2021. "Material flow analysis of zinc during the manufacturing process in integrated steel mills in China," Journal of Industrial Ecology, Yale University, vol. 25(4), pages 1009-1020, August.
    • Handle: RePEc:bla:inecol:v:25:y:2021:i:4:p:1009-1020
    DOI: 10.1111/jiec.13096
    as

    Download full text from publisher

    File URL: https://doi.org/10.1111/jiec.13096
    Download Restriction: no
    File URL: https://libkey.io/10.1111/jiec.13096?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    References listed on IDEAS

    as
    1. Carl W. Lam & Seong‐Rin Lim & Julie M. Schoenung, 2013. "Linking Material Flow Analysis with Environmental Impact Potential," Journal of Industrial Ecology, Yale University, vol. 17(2), pages 299-309, April.
    2. Matsuno, Yasunari & Hur, Tak & Fthenakis, Vasilis, 2012. "Dynamic modeling of cadmium substance flow with zinc and steel demand in Japan," Resources, Conservation & Recycling, Elsevier, vol. 61(C), pages 83-90.
    3. T. E. Graedel & Dick van Beers & Marlen Bertram & Kensuke Fuse & Robert B. Gordon & Alexander Gritsinin & Ermelinda M. Harper & Amit Kapur & Robert J. Klee & Reid Lifset & Laiq Memon & Sabrina Spatari, 2005. "The Multilevel Cycle of Anthropogenic Zinc," Journal of Industrial Ecology, Yale University, vol. 9(3), pages 67-90, July.
    4. T.E. Graedel & Marlen Bertram & Barbara Reck, 2005. "Exploratory Data Analysis of the Multilevel Anthropogenic Zinc Cycle," Journal of Industrial Ecology, Yale University, vol. 9(3), pages 91-108, July.
    5. Heinz Schandl & James West, 2012. "Material Flows and Material Productivity in China, Australia, and Japan," Journal of Industrial Ecology, Yale University, vol. 16(3), pages 352-364, June.
    6. Kyaw Nyunt Maung & Cherry Myo Lwin & Seiji Hashimoto, 2019. "Assessment of secondary zinc reserves of nations," Journal of Industrial Ecology, Yale University, vol. 23(5), pages 1109-1120, October.
    7. Wei‐Qiang Chen, 2013. "Recycling Rates of Aluminum in the United States," Journal of Industrial Ecology, Yale University, vol. 17(6), pages 926-938, December.
    8. Daigo, Ichiro & Osako, Shun & Adachi, Yoshihiro & Matsuno, Yasunari, 2014. "Time-series analysis of global zinc demand associated with steel," Resources, Conservation & Recycling, Elsevier, vol. 82(C), pages 35-40.
    9. Meylan, Grégoire & Reck, Barbara K., 2017. "The anthropogenic cycle of zinc: Status quo and perspectives," Resources, Conservation & Recycling, Elsevier, vol. 123(C), pages 1-10.
    10. Jeong, Yong-Soo & Matsubae-Yokoyama, Kazuyo & Kubo, Hironari & Pak, Jong-Jin & Nagasaka, Tetsuya, 2009. "Substance flow analysis of phosphorus and manganese correlated with South Korean steel industry," Resources, Conservation & Recycling, Elsevier, vol. 53(9), pages 479-489.
    11. Mutha, Nitin H. & Patel, Martin & Premnath, V., 2006. "Plastics materials flow analysis for India," Resources, Conservation & Recycling, Elsevier, vol. 47(3), pages 222-244.
    12. Huang, Chu-Long & Vause, Jonathan & Ma, Hwong-Wen & Yu, Chang-Ping, 2012. "Using material/substance flow analysis to support sustainable development assessment: A literature review and outlook," Resources, Conservation & Recycling, Elsevier, vol. 68(C), pages 104-116.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ren, Lei & Zhou, Sheng & Ou, Xunmin, 2023. "The carbon reduction potential of hydrogen in the low carbon transition of the iron and steel industry: The case of China," Renewable and Sustainable Energy Reviews, Elsevier, vol. 171(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Huang, Chu-Long & Vause, Jonathan & Ma, Hwong-Wen & Yu, Chang-Ping, 2012. "Using material/substance flow analysis to support sustainable development assessment: A literature review and outlook," Resources, Conservation & Recycling, Elsevier, vol. 68(C), pages 104-116.
    2. Gsodam, Petra & Lassnig, Melanie & Kreuzeder, Andreas & Mrotzek, Maximilian, 2014. "The Austrian silver cycle: A material flow analysis," Resources, Conservation & Recycling, Elsevier, vol. 88(C), pages 76-84.
    3. Daigo, Ichiro & Osako, Shun & Adachi, Yoshihiro & Matsuno, Yasunari, 2014. "Time-series analysis of global zinc demand associated with steel," Resources, Conservation & Recycling, Elsevier, vol. 82(C), pages 35-40.
    4. Klinglmair, Manfred & Fellner, Johann, 2011. "Historical iron and steel recovery in times of raw material shortage: The case of Austria during World War I," Ecological Economics, Elsevier, vol. 72(C), pages 179-187.
    5. Christoph Helbig & Yasushi Kondo & Shinichiro Nakamura, 2022. "Simultaneously tracing the fate of seven metals at a global level with MaTrace‐multi," Journal of Industrial Ecology, Yale University, vol. 26(3), pages 923-936, June.
    6. Choi, Chul Hun & Cao, Jinjian & Zhao, Fu, 2016. "System Dynamics Modeling of Indium Material Flows under Wide Deployment of Clean Energy Technologies," Resources, Conservation & Recycling, Elsevier, vol. 114(C), pages 59-71.
    7. Meylan, Grégoire & Reck, Barbara K., 2017. "The anthropogenic cycle of zinc: Status quo and perspectives," Resources, Conservation & Recycling, Elsevier, vol. 123(C), pages 1-10.
    8. Cha, Kyounghoon & Son, Minjung & Matsuno, Yasunari & Fthenakis, Vasilis & Hur, Tak, 2013. "Substance flow analysis of cadmium in Korea," Resources, Conservation & Recycling, Elsevier, vol. 71(C), pages 31-39.
    9. Rupert J. Myers & Tomer Fishman & Barbara K. Reck & T. E. Graedel, 2019. "Unified Materials Information System (UMIS): An Integrated Material Stocks and Flows Data Structure," Journal of Industrial Ecology, Yale University, vol. 23(1), pages 222-240, February.
    10. Yang, Honghua & Ma, Linwei & Li, Zheng, 2023. "Tracing China's steel use from steel flows in the production system to steel footprints in the consumption system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 172(C).
    11. Martinico-Perez, Marianne Faith G. & Schandl, Heinz & Fishman, Tomer & Tanikawa, Hiroki, 2018. "The Socio-Economic Metabolism of an Emerging Economy: Monitoring Progress of Decoupling of Economic Growth and Environmental Pressures in the Philippines," Ecological Economics, Elsevier, vol. 147(C), pages 155-166.
    12. Bain, Ariana & Shenoy, Megha & Ashton, Weslynne & Chertow, Marian, 2010. "Industrial symbiosis and waste recovery in an Indian industrial area," Resources, Conservation & Recycling, Elsevier, vol. 54(12), pages 1278-1287.
    13. Miguel Vigil & Maria Pedrosa-Laza & JV Alvarez Cabal & Francisco Ortega-Fernández, 2020. "Sustainability Analysis of Active Packaging for the Fresh Cut Vegetable Industry by Means of Attributional & Consequential Life Cycle Assessment," Sustainability, MDPI, vol. 12(17), pages 1-18, September.
    14. Matsuno, Yasunari & Hur, Tak & Fthenakis, Vasilis, 2012. "Dynamic modeling of cadmium substance flow with zinc and steel demand in Japan," Resources, Conservation & Recycling, Elsevier, vol. 61(C), pages 83-90.
    15. Singh, Simron J & Talwar, Simran & Shenoy, Megha, 2021. "Why Socio-metabolic Studies are Central to Ecological Economics," Ecology, Economy and Society - the INSEE Journal, Indian Society of Ecological Economics (INSEE), vol. 4(02), July.
    16. Dhiya Durani Sofian Azizi & Marlia M. Hanafiah & Kok Sin Woon, 2023. "Material Flow Analysis in WEEE Management for Circular Economy: A Content Review on Applications, Limitations, and Future Outlook," Sustainability, MDPI, vol. 15(4), pages 1-22, February.
    17. Kassouri, Yacouba & Alola, Andrew Adewale & Savaş, Savaş, 2021. "The dynamics of material consumption in phases of the economic cycle for selected emerging countries," Resources Policy, Elsevier, vol. 70(C).
    18. Yoshida, Keisuke & Fishman, Tomer & Okuoka, Keijiro & Tanikawa, Hiroki, 2017. "Material stock's overburden: Automatic spatial detection and estimation of domestic extraction and hidden material flows," Resources, Conservation & Recycling, Elsevier, vol. 123(C), pages 165-175.
    19. Sohani Vihanga Withanage & Komal Habib, 2021. "Life Cycle Assessment and Material Flow Analysis: Two Under-Utilized Tools for Informing E-Waste Management," Sustainability, MDPI, vol. 13(14), pages 1-21, July.
    20. Chen, Wu & Wang, Minxi & Li, Xin, 2016. "Analysis of copper flows in the United States: 1975–2012," Resources, Conservation & Recycling, Elsevier, vol. 111(C), pages 67-76.

    More about this item

    Statistics

    Access and download statistics

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:bla:inecol:v:25:y:2021:i:4:p:1009-1020. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Wiley Content Delivery (email available below). General contact details of provider: http://www.blackwellpublishing.com/journal.asp?ref=1088-1980 .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.