IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v15y2023i9p7547-d1139449.html
   My bibliography  Save this article

Fuel Gas Production from the Co-Gasification of Coal, Plastic Waste, and Wood in a Fluidized Bed Reactor: Effect of Gasifying Agent and Bed Material

Author

Listed:
  • Lucio Zaccariello

    (Department of Environmental, Biological and Pharmaceutical Sciences and Technologies, University of Campania, Via Antonio Vivaldi 43, 81100 Caserta, Italy)

  • Maria Laura Mastellone

    (Department of Environmental, Biological and Pharmaceutical Sciences and Technologies, University of Campania, Via Antonio Vivaldi 43, 81100 Caserta, Italy)

Abstract

In this study, the effect of gasifying agent and bed material on the performance of the co-gasification of a mixture of coal, plastic waste, and wood was investigated. The experimental runs were carried out in a lab-scale bubbling fluidized bed reactor utilizing air, oxygen-enriched air, a mixture of air and steam, and a mixture of oxygen and carbon dioxide as reactant gases, while silica sand, olivine, and a mixture of olivine and dolomite as bed materials were used. The results indicated that both gasifying agent and bed material strongly affect the gas composition and, as a consequence, the process performance. In particular, the test with oxygen-enriched air and silica sand provided a producer gas with the highest heating value (9.32 MJ/Nm 3 ), while the best performance in terms of gas yield (2.98 Nm 3 /kg) and tar reduction (−94.5%) was obtained by utilizing the air/steam mixture and olivine. As regards tar composition, it was observed that the most abundant and recalcitrant tar substance groups are naphthalenes and PAHs. On the other hand, phenols and furans appear to be the most sensitive groups to the effect of gasifying agent and bed material.

Suggested Citation

  • Lucio Zaccariello & Maria Laura Mastellone, 2023. "Fuel Gas Production from the Co-Gasification of Coal, Plastic Waste, and Wood in a Fluidized Bed Reactor: Effect of Gasifying Agent and Bed Material," Sustainability, MDPI, vol. 15(9), pages 1-19, May.
    • Handle: RePEc:gam:jsusta:v:15:y:2023:i:9:p:7547-:d:1139449
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/15/9/7547/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/2071-1050/15/9/7547/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Wang, Zhiwei & Burra, Kiran G. & Zhang, Mengju & Li, Xueqin & He, Xiaofeng & Lei, Tingzhou & Gupta, Ashwani K., 2020. "Syngas evolution and energy efficiency in CO2-assisted gasification of pine bark," Applied Energy, Elsevier, vol. 269(C).
    2. Han, Si Woo & Lee, Jeong Jae & Tokmurzin, Diyar & Lee, Seok Hyeong & Nam, Ji Young & Park, Sung Jin & Ra, Ho Won & Mun, Tae-Young & Yoon, Sang Jun & Yoon, Sung Min & Moon, Ji Hong & Lee, Jae Goo & Kim, 2022. "Gasification characteristics of waste plastics (SRF) in a bubbling fluidized bed: Effects of temperature and equivalence ratio," Energy, Elsevier, vol. 238(PC).
    3. Lucio Zaccariello & Maria Laura Mastellone & Luisa Ida D’Amelia & Michelina Catauro & Biagio Morrone, 2020. "Assessment of Integration between Lactic Acid, Biogas and Hydrochar Production in OFMSW Plants," Energies, MDPI, vol. 13(24), pages 1-19, December.
    4. Li, Jinhu & Burra, Kiran Raj G. & Wang, Zhiwei & Liu, Xuan & Gupta, Ashwani K., 2021. "Co-gasification of high-density polyethylene and pretreated pine wood," Applied Energy, Elsevier, vol. 285(C).
    5. Nam, Hyungseok & Capareda, Sergio, 2015. "Experimental investigation of torrefaction of two agricultural wastes of different composition using RSM (response surface methodology)," Energy, Elsevier, vol. 91(C), pages 507-516.
    6. Moghadam, Reza Alipour & Yusup, Suzana & Uemura, Yoshimitsu & Chin, Bridgid Lai Fui & Lam, Hon Loong & Al Shoaibi, Ahmed, 2014. "Syngas production from palm kernel shell and polyethylene waste blend in fluidized bed catalytic steam co-gasification process," Energy, Elsevier, vol. 75(C), pages 40-44.
    7. Déparrois, N. & Singh, P. & Burra, K.G. & Gupta, A.K., 2019. "Syngas production from co-pyrolysis and co-gasification of polystyrene and paper with CO2," Applied Energy, Elsevier, vol. 246(C), pages 1-10.
    8. Sahu, Pradeep & Vairakannu, Prabu, 2023. "CO2 based co-gasification of printed circuit board with high ash coal," Energy, Elsevier, vol. 263(PE).
    9. Hernández, J.J. & Ballesteros, R. & Aranda, G., 2013. "Characterisation of tars from biomass gasification: Effect of the operating conditions," Energy, Elsevier, vol. 50(C), pages 333-342.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Montagnaro, Fabio & Zaccariello, Lucio, 2023. "Performance assessment of a demonstration-scale biomass gasification power plant using material and energy flow analyses," Energy, Elsevier, vol. 284(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Li, Jinhu & Ye, Xinhao & Burra, Kiran G. & Lu, Wei & Wang, Zhiwei & Liu, Xuan & Gupta, Ashwani K., 2023. "Synergistic effects during co-pyrolysis and co-gasification of polypropylene and polystyrene," Applied Energy, Elsevier, vol. 336(C).
    2. Ajorloo, Mojtaba & Ghodrat, Maryam & Scott, Jason & Strezov, Vladimir, 2024. "Experimental analysis of the effects of feedstock composition on the plastic and biomass Co-gasification process," Renewable Energy, Elsevier, vol. 231(C).
    3. Li, Jinhu & Burra, Kiran Raj G. & Wang, Zhiwei & Liu, Xuan & Gupta, Ashwani K., 2021. "Co-gasification of high-density polyethylene and pretreated pine wood," Applied Energy, Elsevier, vol. 285(C).
    4. Mariyam, Sabah & Shahbaz, Muhammad & Al-Ansari, Tareq & Mackey, Hamish. R & McKay, Gordon, 2022. "A critical review on co-gasification and co-pyrolysis for gas production," Renewable and Sustainable Energy Reviews, Elsevier, vol. 161(C).
    5. Aktas, Fatih & Mavukwana, Athi-enkosi & Burra, Kiran Raj Goud & Gupta, Ashwani K., 2024. "Role of spent FCC catalyst in pyrolysis and CO2-assisted gasification of pinewood," Applied Energy, Elsevier, vol. 366(C).
    6. Fazil, A. & Kumar, Sandeep & Mahajani, Sanjay M., 2022. "Downdraft co-gasification of high ash biomass and plastics," Energy, Elsevier, vol. 243(C).
    7. Ajorloo, Mojtaba & Ghodrat, Maryam & Scott, Jason & Strezov, Vladimir, 2022. "Modelling and statistical analysis of plastic biomass mixture co-gasification," Energy, Elsevier, vol. 256(C).
    8. Wang, Zhiwei & Burra, Kiran G. & Li, Xueqin & Zhang, Mengju & He, Xiaofeng & Lei, Tingzhou & Gupta, Ashwani K., 2020. "CO2-assisted gasification of polyethylene terephthalate with focus on syngas evolution and solid yield," Applied Energy, Elsevier, vol. 276(C).
    9. Liu, Qian & Sun, Jianguo & Gu, Yonghua & Zhong, Wenqi & Gao, Ke, 2024. "Experimental study on CO2 co-gasification characteristics of biomass and waste plastics: Insight into interaction and targeted regulation method," Energy, Elsevier, vol. 292(C).
    10. Montagnaro, Fabio & Zaccariello, Lucio, 2023. "Performance assessment of a demonstration-scale biomass gasification power plant using material and energy flow analyses," Energy, Elsevier, vol. 284(C).
    11. Yek, Peter Nai Yuh & Cheng, Yoke Wang & Liew, Rock Keey & Wan Mahari, Wan Adibah & Ong, Hwai Chyuan & Chen, Wei-Hsin & Peng, Wanxi & Park, Young-Kwon & Sonne, Christian & Kong, Sieng Huat & Tabatabaei, 2021. "Progress in the torrefaction technology for upgrading oil palm wastes to energy-dense biochar: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 151(C).
    12. Nam, Hyungseok & Kim, Jung Hwan & Kim, Hana & Kim, Min Jae & Jeon, Sang-Goo & Jin, Gyoung-Tae & Won, Yooseob & Hwang, Byung Wook & Lee, Seung-Yong & Baek, Jeom-In & Lee, Doyeon & Seo, Myung Won & Ryu,, 2021. "CO2 methanation in a bench-scale bubbling fluidized bed reactor using Ni-based catalyst and its exothermic heat transfer analysis," Energy, Elsevier, vol. 214(C).
    13. Liu, Zihan & Li, Pan & Chang, Chun & Wang, Xianhua & Song, Jiande & Fang, Shuqi & Pang, Shusheng, 2022. "Influence of metal chloride modified biochar on products characteristics from biomass catalytic pyrolysis," Energy, Elsevier, vol. 250(C).
    14. Patrik Šuhaj & Jakub Husár & Juma Haydary, 2020. "Gasification of RDF and Its Components with Tire Pyrolysis Char as Tar-Cracking Catalyst," Sustainability, MDPI, vol. 12(16), pages 1-14, August.
    15. Zane Vincevica-Gaile & Varvara Sachpazidou & Valdis Bisters & Maris Klavins & Olga Anne & Inga Grinfelde & Emil Hanc & William Hogland & Muhammad Asim Ibrahim & Yahya Jani & Mait Kriipsalu & Divya Pal, 2022. "Applying Macroalgal Biomass as an Energy Source: Utility of the Baltic Sea Beach Wrack for Thermochemical Conversion," Sustainability, MDPI, vol. 14(21), pages 1-18, October.
    16. Berrueco, C. & Montané, D. & Matas Güell, B. & del Alamo, G., 2014. "Effect of temperature and dolomite on tar formation during gasification of torrefied biomass in a pressurized fluidized bed," Energy, Elsevier, vol. 66(C), pages 849-859.
    17. Batidzirai, B. & Mignot, A.P.R. & Schakel, W.B. & Junginger, H.M. & Faaij, A.P.C., 2013. "Biomass torrefaction technology: Techno-economic status and future prospects," Energy, Elsevier, vol. 62(C), pages 196-214.
    18. Tian, Beile & Mao, Songbo & Guo, Feiqiang & Bai, Jiaming & Shu, Rui & Qian, Lin & Liu, Qi, 2022. "Monolithic biochar-supported cobalt-based catalysts with high-activity and superior-stability for biomass tar reforming," Energy, Elsevier, vol. 242(C).
    19. Li, Fenghai & Liu, Quanrun & Li, Meng & Fang, Yitian, 2018. "Understanding fly-ash formation during fluidized-bed gasification of high-silicon-aluminum coal based on its characteristics," Energy, Elsevier, vol. 150(C), pages 142-152.
    20. Monteiro, Eliseu & Ismail, Tamer M. & Ramos, Ana & Abd El-Salam, M. & Brito, Paulo & Rouboa, Abel, 2018. "Experimental and modeling studies of Portuguese peach stone gasification on an autothermal bubbling fluidized bed pilot plant," Energy, Elsevier, vol. 142(C), pages 862-877.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:15:y:2023:i:9:p:7547-:d:1139449. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.