IDEAS home Printed from https://ideas.repec.org/a/gam/jsusta/v12y2019i1p18-d299344.html
   My bibliography  Save this article

Experimental Study on the Optimum Preparation of Bentonite–Steel Slag Composite Particles

Author

Listed:
  • Xinhui Zhan

    (School of Mines, Liaoning Technical University, Fuxin 123000, China)

  • Liping Xiao

    (School of Civil Engineering, Liaoning Technical University, Fuxin 123000, China)

  • Bing Liang

    (School of Mechanics and Engineering, Liaoning Technical University, Fuxin 123000, China)

Abstract

Novel multifunctional adsorbent bentonite–steel slag composite particles (BSC) were developed for highly efficient and synergistic treatment of heavy metal ions in acid mine drainage (AMD). Single-factor experiments were performed to examine the influence of different parameters on the adsorption effect, alkalinity release quantity, and loss rate of the composite particles. Based on these results, an L9(4 3 ) orthogonal experiment was carried out, and the optimum levels and order of the factors were determined by range analysis. Finally, the optimum preparation process of the composite particles was determined: a bentonite–steel slag proportion of 5:5, Na 2 CO 3 content of 5%, aging time of 12 h, calcination particle size of 2 mm, calcination temperature of 500 °C, and calcination time of 60 min. The isothermal adsorption of optimum BSC fit well with Langmuir and Brunauer–Emmett–Teller (BET) isotherms ( R 2 R 2 > 0.997). A synergistic adsorption–coagulation effect occurs, leading to the appearance of multiple layers locally on the surface of BSC, which satisfies the BET model. To understand the preparation mechanism of the BSC, bentonite, steel slag, uncalcined BSC, and the optimum BSC were characterized using scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET) surface area analysis, X-ray powder diffraction (XRD), and Fourier-transform infrared spectroscopy (FTIR). The results indicate that calcination led to an increase in the average pore radius, total pore volume, and specific surface area ( S BET ) in the optimum BSC; numerous pores were present on its layered surface. Although the layer spacing increased after calcination, the structure of the dioctahedra remained unchanged. Exchangeable Na + , montmorillonite, and alkaline components were present between the optimum BSC layers. Water and impurities were removed after calcination. The BSC not only released an alkalinity-neutralising acid but also induced a synergistic adsorption–coagulation effect that removed heavy metal ions. It is an excellent multifunctional protective material for the mining environment, that can treat AMD-containing heavy metal ions.

Suggested Citation

  • Xinhui Zhan & Liping Xiao & Bing Liang, 2019. "Experimental Study on the Optimum Preparation of Bentonite–Steel Slag Composite Particles," Sustainability, MDPI, vol. 12(1), pages 1-27, December.
  • Handle: RePEc:gam:jsusta:v:12:y:2019:i:1:p:18-:d:299344
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/2071-1050/12/1/18/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/2071-1050/12/1/18/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Muhammad Tahir Amin & Abdulrahman Ali Alazba & Muhammad Shafiq, 2015. "Adsorptive Removal of Reactive Black 5 from Wastewater Using Bentonite Clay: Isotherms, Kinetics and Thermodynamics," Sustainability, MDPI, vol. 7(11), pages 1-17, November.
    2. Wu, Xuan & Leung, Dennis Y.C., 2011. "Optimization of biodiesel production from camelina oil using orthogonal experiment," Applied Energy, Elsevier, vol. 88(11), pages 3615-3624.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Marcela Bindzarova Gergelova & Zofia Kuzevicova & Slavomir Labant & Stefan Kuzevic & Diana Bobikova & Jozef Mizak, 2020. "Roof’s Potential and Suitability for PV Systems Based on LiDAR: A Case Study of Komárno, Slovakia," Sustainability, MDPI, vol. 12(23), pages 1-22, November.
    2. Talebian-Kiakalaieh, Amin & Amin, Nor Aishah Saidina & Mazaheri, Hossein, 2013. "A review on novel processes of biodiesel production from waste cooking oil," Applied Energy, Elsevier, vol. 104(C), pages 683-710.
    3. Muhammad Tahir Amin & Abdulrahman Ali Alazba & Muhammad Shafiq, 2021. "Successful Application of Eucalyptus Camdulensis Biochar in the Batch Adsorption of Crystal Violet and Methylene Blue Dyes from Aqueous Solution," Sustainability, MDPI, vol. 13(7), pages 1-18, March.
    4. Subramaniam, D. & Murugesan, A. & Avinash, A. & Kumaravel, A., 2013. "Bio-diesel production and its engine characteristics—An expatiate view," Renewable and Sustainable Energy Reviews, Elsevier, vol. 22(C), pages 361-370.
    5. Sendzikiene, Egle & Sinkuniene, Dovile & Kazanceva, Irina & Kazancev, Kiril, 2016. "Optimization of low quality rapeseed oil transesterification with butanol by applying the response surface methodology," Renewable Energy, Elsevier, vol. 87(P1), pages 266-272.
    6. Lian, Shuang & Li, Huijuan & Tang, Jinqiang & Tong, Dongmei & Hu, Changwei, 2012. "Integration of extraction and transesterification of lipid from jatropha seeds for the production of biodiesel," Applied Energy, Elsevier, vol. 98(C), pages 540-547.
    7. Lau, Pak-Chung & Kwong, Tsz-Lung & Yung, Ka-Fu, 2022. "Manganese glycerolate catalyzed simultaneous esterification and transesterification: The kinetic and mechanistic study, and application in biodiesel and bio-lubricants synthesis," Renewable Energy, Elsevier, vol. 189(C), pages 549-558.
    8. Lam, Man Kee & Lee, Keat Teong, 2012. "Potential of using organic fertilizer to cultivate Chlorella vulgaris for biodiesel production," Applied Energy, Elsevier, vol. 94(C), pages 303-308.
    9. Lim, Steven & Lee, Keat Teong, 2013. "Process intensification for biodiesel production from Jatropha curcas L. seeds: Supercritical reactive extraction process parameters study," Applied Energy, Elsevier, vol. 103(C), pages 712-720.
    10. Talebian-Kiakalaieh, Amin & Amin, Nor Aishah Saidina & Zarei, Alireza & Noshadi, Iman, 2013. "Transesterification of waste cooking oil by heteropoly acid (HPA) catalyst: Optimization and kinetic model," Applied Energy, Elsevier, vol. 102(C), pages 283-292.
    11. Nayak, Milap G. & Vyas, Amish P., 2019. "Optimization of microwave-assisted biodiesel production from Papaya oil using response surface methodology," Renewable Energy, Elsevier, vol. 138(C), pages 18-28.
    12. Muhammad Hazwan Hamzah & Muhammad Fitri Ahmad Asri & Hasfalina Che Man & Abdulsalam Mohammed, 2019. "Prospective Application of Palm Oil Mill Boiler Ash as a Biosorbent: Effect of Microwave Irradiation and Palm Oil Mill Effluent Decolorization by Adsorption," IJERPH, MDPI, vol. 16(18), pages 1-18, September.
    13. Zhao, Peitao & Ge, Shifu & Yoshikawa, Kunio, 2013. "An orthogonal experimental study on solid fuel production from sewage sludge by employing steam explosion," Applied Energy, Elsevier, vol. 112(C), pages 1213-1221.
    14. Long, Yun-Duo & Fang, Zhen & Su, Tong-Chao & Yang, Qing, 2014. "Co-production of biodiesel and hydrogen from rapeseed and Jatropha oils with sodium silicate and Ni catalysts," Applied Energy, Elsevier, vol. 113(C), pages 1819-1825.
    15. Bin Li & Zheng Cui & Qun Cao & Wei Shao, 2021. "Increasing Efficiency of a Finned Heat Sink Using Orthogonal Analysis," Energies, MDPI, vol. 14(3), pages 1-15, February.
    16. Xinhui Zhan & Liping Xiao & Bing Liang, 2019. "Removal of Pb(II) from Acid Mine Drainage with Bentonite-Steel Slag Composite Particles," Sustainability, MDPI, vol. 11(16), pages 1-17, August.
    17. Zou, Shuzhen & Wang, Hui & Wang, Xiaojiao & Zhou, Sha & Li, Xue & Feng, Yongzhong, 2016. "Application of experimental design techniques in the optimization of the ultrasonic pretreatment time and enhancement of methane production in anaerobic co-digestion," Applied Energy, Elsevier, vol. 179(C), pages 191-202.
    18. Yan, Zhipei & Li, Jihong & Li, Shizhong & Chang, Sandra & Cui, Ting & Jiang, Yan & Cong, Guangtao & Yu, Menghui & Zhang, Lei, 2015. "Impact of lignin removal on the enzymatic hydrolysis of fermented sweet sorghum bagasse," Applied Energy, Elsevier, vol. 160(C), pages 641-647.
    19. Jahirul, M.I. & Rasul, M.G. & Brown, R.J. & Senadeera, W. & Hosen, M.A. & Haque, R. & Saha, S.C. & Mahlia, T.M.I., 2021. "Investigation of correlation between chemical composition and properties of biodiesel using principal component analysis (PCA) and artificial neural network (ANN)," Renewable Energy, Elsevier, vol. 168(C), pages 632-646.
    20. Ngaosuwan, Kanokwan & Goodwin, James G. & Prasertdham, Piyasan, 2016. "A green sulfonated carbon-based catalyst derived from coffee residue for esterification," Renewable Energy, Elsevier, vol. 86(C), pages 262-269.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jsusta:v:12:y:2019:i:1:p:18-:d:299344. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.