IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i7p1976-d529422.html
   My bibliography  Save this article

Eccentricity in Induction Machines—A Useful Tool for Assessing Its Level

Author

Listed:
  • Janusz Petryna

    (Department of Electrical Engineering, Polytechnic Faculty, University of Applied Sciences in Tarnow, Mickiewicza 8 Str., 33-100 Tarnow, Poland)

  • Arkadiusz Duda

    (Department of Electrical Engineering, Faculty of Electrical and Computer Engineering, Cracow University of Technology, Warszawska 24 Str., 31-155 Cracow, Poland)

  • Maciej Sułowicz

    (Department of Electrical Engineering, Faculty of Electrical and Computer Engineering, Cracow University of Technology, Warszawska 24 Str., 31-155 Cracow, Poland)

Abstract

In the condition monitoring of induction machines operating in various industry sectors, the assessment of eccentricity is as important as the assessment of the condition of windings, bearings, mechanical vibrations or noise. The reasons for the eccentricity can be various; for example, rotor imbalance, damage or wear of the bearings, improper alignment of the rotor and the load machine and finally, assembly errors after overhaul. Disregard of this phenomenon during routine tests may result in the development of vibrations transmitted to the stator windings, faster wear of the bearings and even, in extreme cases, rubbing of the rotor against the stator surface and damage to the windings and local overheating of the machine core. On the basis of years of experience in the diagnosis of large induction machines operating in various industries, the article deals with the problem of developing reliable indicators for assessing the levels of commonly accepted types of eccentricity. Starting from field calculations and analyzing various cases of eccentricity, the methodology for determining the indicators for evaluation from the stator current spectrum is shown. The changes in the values of these indices for various cases of simultaneous occurrence of static and dynamic eccentricity are shown. The calculation results were verified in the laboratory. Also shown are three interesting cases from diagnostic practice in the evaluation of high-power machines in the industry. It has been shown that the proposed indicators are useful and enable an accurate diagnosis of levels of eccentricity.

Suggested Citation

  • Janusz Petryna & Arkadiusz Duda & Maciej Sułowicz, 2021. "Eccentricity in Induction Machines—A Useful Tool for Assessing Its Level," Energies, MDPI, vol. 14(7), pages 1-26, April.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:7:p:1976-:d:529422
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/7/1976/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/7/1976/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Xueping Xu & Qinkai Han & Fulei Chu, 2018. "Review of Electromagnetic Vibration in Electrical Machines," Energies, MDPI, vol. 11(7), pages 1-33, July.
    2. Arkadiusz Duda & Maciej Sułowicz, 2020. "A New Effective Method of Induction Machine Condition Assessment Based on Zero-Sequence Voltage (ZSV) Symptoms," Energies, MDPI, vol. 13(14), pages 1-26, July.
    3. Arkadiusz Duda & Piotr Drozdowski, 2020. "Induction Motor Fault Diagnosis Based on Zero-Sequence Current Analysis," Energies, MDPI, vol. 13(24), pages 1-25, December.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Marcin Tomczyk & Ryszard Mielnik & Anna Plichta & Iwona Gołdasz & Maciej Sułowicz, 2021. "Application of Genetic Algorithm for Inter-Turn Short Circuit Detection in Stator Winding of Induction Motor," Energies, MDPI, vol. 14(24), pages 1-20, December.
    2. Arkadiusz Duda & Piotr Drozdowski, 2020. "Induction Motor Fault Diagnosis Based on Zero-Sequence Current Analysis," Energies, MDPI, vol. 13(24), pages 1-25, December.
    3. Konstantinos N. Gyftakis & Carlos A. Platero & Yucheng Zhang & Santiago Bernal, 2019. "Diagnosis of Static Eccentricity in 3-Phase Synchronous Machines using a Pseudo Zero-Sequence Current," Energies, MDPI, vol. 12(13), pages 1-16, June.
    4. Abel Sancarlos & Chady Ghnatios & Jean-Louis Duval & Nicolas Zerbib & Elias Cueto & Francisco Chinesta, 2021. "Fast Computation of Multi-Parametric Electromagnetic Fields in Synchronous Machines by Using PGD-Based Fully Separated Representations," Energies, MDPI, vol. 14(5), pages 1-17, March.
    5. Chao Fu & Dong Zhen & Yongfeng Yang & Fengshou Gu & Andrew Ball, 2019. "Effects of Bounded Uncertainties on the Dynamic Characteristics of an Overhung Rotor System with Rubbing Fault," Energies, MDPI, vol. 12(22), pages 1-15, November.
    6. Bon-Gwan Gu, 2022. "Development of Broken Rotor Bar Fault Diagnosis Method with Sum of Weighted Fourier Series Coefficients Square," Energies, MDPI, vol. 15(22), pages 1-12, November.
    7. Edison Gundabattini & Arkadiusz Mystkowski & Adam Idzkowski & Raja Singh R. & Darius Gnanaraj Solomon, 2021. "Thermal Mapping of a High-Speed Electric Motor Used for Traction Applications and Analysis of Various Cooling Methods—A Review," Energies, MDPI, vol. 14(5), pages 1-32, March.
    8. Arkadiusz Duda & Maciej Sułowicz, 2020. "A New Effective Method of Induction Machine Condition Assessment Based on Zero-Sequence Voltage (ZSV) Symptoms," Energies, MDPI, vol. 13(14), pages 1-26, July.
    9. Patxi Gonzalez & Garikoitz Buigues & Angel Javier Mazon, 2023. "Noise in Electric Motors: A Comprehensive Review," Energies, MDPI, vol. 16(14), pages 1-22, July.
    10. Adam Muc & Marcin Morawiec & Filip Wilczyński, 2023. "Steady-State Vibration Level Measurement of the Five-Phase Induction Machine during Third Harmonic Injection or Open-Phase Faults," Energies, MDPI, vol. 16(2), pages 1-16, January.
    11. Marco Antonio Rodriguez-Blanco & Victor Golikov & René Osorio-Sánchez & Oleg Samovarov & Gerardo Ortiz-Torres & Rafael Sanchez-Lara & Jose Luis Vazquez-Avila, 2022. "Fault Diagnosis of Induction Motor Using D-Q Simplified Model and Parity Equations," Energies, MDPI, vol. 15(22), pages 1-19, November.
    12. Artem Ermolaev & Vladimir Erofeev & Aleksandr Plekhov & Dmitry Titov, 2022. "Magnetic Vibration in Induction Motor Caused by Supply Voltage Distortion," Energies, MDPI, vol. 15(24), pages 1-11, December.
    13. Jijian Lian & Hongzhen Wang & Haijun Wang, 2018. "Study on Vibration Transmission among Units in Underground Powerhouse of a Hydropower Station," Energies, MDPI, vol. 11(11), pages 1-22, November.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:7:p:1976-:d:529422. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.