IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i19p6205-d645701.html
   My bibliography  Save this article

Effect of Microwave Pulses on the Morphology and Development of Spark-Ignited Flame Kernel

Author

Listed:
  • Xiaobei Cheng

    (State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan 430074, China
    School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China)

  • Xinhua Zhang

    (State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan 430074, China
    School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China)

  • Zhaowen Wang

    (State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan 430074, China
    School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China)

  • Huimin Wu

    (State Key Laboratory of Coal Combustion, Huazhong University of Science and Technology, Wuhan 430074, China
    School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan 430074, China)

  • Zhaowu Wang

    (Henan Key Laboratory of Photoelectric Energy Storage Materials and Applications, School of Physics and Engineering, Henan University of Science and Technology, Luoyang 471023, China)

  • Jyh-Yuan Chen

    (Department of Mechanical Engineering, University of California—Berkeley, Berkeley, CA 94720, USA)

Abstract

Microwave-assisted spark ignition (MAI) is a promising way to enhance the ignition performance of engines under lean conditions. To understand the effect of microwave-induced flow during MAI, the development and morphology of spark-ignited methane-air flame kernel under various microwave pulse parameters are experimentally studied. Experiments are conducted in a constant volume combustion chamber, and flame development is recorded through a high-speed shadowgraph method. Flame area and deformation index are adopted to evaluate the flame characteristic. Results show that increasing the microwave pulse energy from 0 to 150 mJ exhibits a threshold process for expanding the flame kernel area under 0.2 MPa ambient pressure. When the pulse energy is below the threshold of 90 mJ, the microwave enhancing efficiency is much lower than that beyond the threshold. Increasing microwave pulse repetition frequency (PRF) changes the flow on flame surface and raises the absorption efficiency for microwave energy, and thus helps to improve the MAI performance under higher pressures. Hence, 1 kHz pulses cause more obvious flame deformation than those with higher PRF pulses under 0.2 MPa, while this tendency is reversed as the ambient pressure increases to 0.6 MPa. Besides, microwave pulses of different repetition frequencies lead to different flame kernel morphology, implying the various regimes behind the interaction between a microwave and spark kernel.

Suggested Citation

  • Xiaobei Cheng & Xinhua Zhang & Zhaowen Wang & Huimin Wu & Zhaowu Wang & Jyh-Yuan Chen, 2021. "Effect of Microwave Pulses on the Morphology and Development of Spark-Ignited Flame Kernel," Energies, MDPI, vol. 14(19), pages 1-19, September.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:19:p:6205-:d:645701
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/19/6205/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/19/6205/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Huang, Sheng & Zhang, Yu & Huang, Ronghua & Xu, Shijie & Ma, Yinjie & Wang, Zhaowen & Zhang, Xinhua, 2019. "Quantitative characterization of crack and cell's morphological evolution in premixed expanding spherical flames," Energy, Elsevier, vol. 171(C), pages 161-169.
    2. Yu, Xiumin & Guo, Zezhou & Sun, Ping & Wang, Sen & Li, Anshi & Yang, Hang & Li, Zhe & Liu, Ze & Li, Jingyuan & Shang, Zhen, 2019. "Investigation of combustion and emissions of an SI engine with ethanol port injection and gasoline direct injection under lean burn conditions," Energy, Elsevier, vol. 189(C).
    3. Sergey B. Leonov, 2018. "Electrically Driven Supersonic Combustion," Energies, MDPI, vol. 11(7), pages 1-35, July.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gong, Changming & Yi, Lin & Zhang, Zilei & Sun, Jingzhen & Liu, Fenghua, 2020. "Assessment of ultra-lean burn characteristics for a stratified-charge direct-injection spark-ignition methanol engine under different high compression ratios," Applied Energy, Elsevier, vol. 261(C).
    2. Mendiburu, Andrés Z. & Lauermann, Carlos H. & Hayashi, Thamy C. & Mariños, Diego J. & Rodrigues da Costa, Roberto Berlini & Coronado, Christian J.R. & Roberts, Justo J. & de Carvalho, João A., 2022. "Ethanol as a renewable biofuel: Combustion characteristics and application in engines," Energy, Elsevier, vol. 257(C).
    3. Chaolong Li & Zhixun Xia & Likun Ma & Xiang Zhao & Binbin Chen, 2019. "Numerical Study on the Solid Fuel Rocket Scramjet Combustor with Cavity," Energies, MDPI, vol. 12(7), pages 1-17, March.
    4. Zhao, Haoran & Wang, Jinhua & Cai, Xiao & Dai, Hongchao & Liu, Xiao & Li, Gang & Huang, Zuohua, 2023. "On accelerative propagation of premixed hydrogen/air laminar and turbulent expanding flames," Energy, Elsevier, vol. 283(C).
    5. Lars Zigan, 2018. "Electric Fields in Energy and Process Engineering," Energies, MDPI, vol. 11(9), pages 1-4, August.
    6. Jufang Zhang & Xiumin Yu & Zezhou Guo & Yinan Li & Jiahua Zhang & Dongjie Liu, 2022. "Study on Combustion and Emissions of a Spark Ignition Engine with Gasoline Port Injection Plus Acetone–Butanol–Ethanol (ABE) Direct Injection under Different Speeds and Loads," Energies, MDPI, vol. 15(19), pages 1-22, September.
    7. Huang, Yuhan & Surawski, Nic C. & Zhuang, Yuan & Zhou, John L. & Hong, Guang, 2021. "Dual injection: An effective and efficient technology to use renewable fuels in spark ignition engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 143(C).
    8. Sathish Kumar, T. & Ashok, B. & Saravanan, B., 2023. "Calibration of flex-fuel operating parameters using grey relational analysis to enhance the output characteristics of ethanol powered direct injection SI engine," Energy, Elsevier, vol. 281(C).
    9. Catapano, Francesco & Di Iorio, Silvana & Magno, Agnese & Vaglieco, Bianca Maria, 2022. "Effect of fuel quality on combustion evolution and particle emissions from PFI and GDI engines fueled with gasoline, ethanol and blend, with focus on 10–23 nm particles," Energy, Elsevier, vol. 239(PB).
    10. Ahmed A. Fattah & Tarek M. Aboul-Fotouh & Khaled A. Fattah & Aya H. Mohammed, 2022. "Utilization of Selected Nanoparticles (Ag 2 O and MnO 2 ) for the Production of High-Quality and Environmental-Friendly Gasoline," Sustainability, MDPI, vol. 14(19), pages 1-12, September.
    11. Alexander Firsov & Valentin Bityurin & Dmitriy Tarasov & Anastasia Dobrovolskaya & Roman Troshkin & Aleksey Bocharov, 2022. "Longitudinal DC Discharge in a Supersonic Flow: Numerical Simulation and Experiment," Energies, MDPI, vol. 15(19), pages 1-17, September.
    12. Liu, Shang & Lin, Zhelong & Zhang, Hao & Fan, Qinhao & Lei, Nuo & Wang, Zhi, 2023. "Experimental study on combustion and emission characteristics of ethanol-gasoline blends in a high compression ratio SI engine," Energy, Elsevier, vol. 274(C).
    13. Tadeusz Mączka & Halina Pawlak-Kruczek & Lukasz Niedzwiecki & Edward Ziaja & Artur Chorążyczewski, 2020. "Plasma Assisted Combustion as a Cost-Effective Way for Balancing of Intermittent Sources: Techno-Economic Assessment for 200 MW el Power Unit," Energies, MDPI, vol. 13(19), pages 1-16, September.
    14. Muhammad Yousaf Arshad & Muhammad Azam Saeed & Muhammad Wasim Tahir & Ahsan Raza & Anam Suhail Ahmad & Fasiha Tahir & Bartłomiej Borkowski & Tadeusz Mączka & Lukasz Niedzwiecki, 2023. "Role of Experimental, Modeling, and Simulation Studies of Plasma in Sustainable Green Energy," Sustainability, MDPI, vol. 15(19), pages 1-35, September.
    15. Jeyaseelan, Thangaraja & Ekambaram, Porpatham & Subramanian, Jayagopal & Shamim, Tariq, 2022. "A comprehensive review on the current trends, challenges and future prospects for sustainable mobility," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    16. Xu, Cangsu & Liu, Weinan & Oppong, Francis & Wang, Qianwen & Sun, Zuo-Yu & Li, Xiaolu, 2022. "Investigations on cellularization instability of 2-ethylfuran," Renewable Energy, Elsevier, vol. 191(C), pages 447-458.
    17. Feng, Rong & Zhu, Jiajian & Wang, Zhenguo & Sun, Mingbo & Wang, Hongbo & Cai, Zun & An, Bin & Li, Liang, 2021. "Ignition modes of a cavity-based scramjet combustor by a gliding arc plasma," Energy, Elsevier, vol. 214(C).
    18. Fridrichová, K. & Drápal, L. & Vopařil, J. & Dlugoš, J., 2021. "Overview of the potential and limitations of cylinder deactivation," Renewable and Sustainable Energy Reviews, Elsevier, vol. 146(C).
    19. Meng, Xianglong & Xie, Fangxi & Li, Xiaona & Han, Linghai & Duan, Jiaquan & Gong, Yanfeng & Zhou, You, 2024. "Study on the effects of intake valve timing and lift on the combustion and emission performance of ethanol, N-butanol, and gasoline engine under stoichiometric combustion and lean burn conditions," Energy, Elsevier, vol. 300(C).
    20. Chang, Ke & Ji, Changwei & Wang, Shuofeng & Yang, Jinxin & Wang, Huaiyu & Xin, Gu & Meng, Hao, 2022. "Numerical investigation of the combined effect of injection angle and injection pressure in a gasoline direct injection rotary engine," Energy, Elsevier, vol. 254(PB).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:19:p:6205-:d:645701. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.