IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v14y2021i13p4006-d587832.html
   My bibliography  Save this article

Hygrothermal and Acoustic Performance of Two Innovative Envelope Renovation Solutions Developed in the e-SAFE Project

Author

Listed:
  • Gianpiero Evola

    (Department of Electric, Electronic and Computer Engineering, University of Catania, 95100 Catania, Italy)

  • Vincenzo Costanzo

    (Department of Civil Engineering and Architecture, University of Catania, 95100 Catania, Italy)

  • Luigi Marletta

    (Department of Electric, Electronic and Computer Engineering, University of Catania, 95100 Catania, Italy)

Abstract

In order to reach the ambitious decarbonizing goals set by the European Union for 2030, deep renovation of the existing European building stock is a key issue. Within this context, the recently funded H2020 project “e-SAFE” is investigating market-ready wooden envelope renovation solutions for non-historic buildings, which encompass both energy and seismic improvement. The research carried out in the project aims at developing, testing and demonstrating these solutions on a real pilot. More specifically, this paper presents preliminary analyses to verify that the solutions satisfy the requisites set by the national regulations in force in most European countries, in terms of hygrothermal and acoustic performance. The analysis, carried out following relevant technical European Standards and based on calculations, considers different climate conditions and existing wall structures, selected amongst those most commonly adopted in Europe. The results show that the addition of a Cross Laminated Timber (CLT) layer with some wooden-based insulation on the outer side allows reaching very good thermal and acoustic performance. However, interstitial condensation may occur in cold climates under high indoor humidity values. This aspect deserves further investigation accounting for the transient behavior of the walls and all vapor transport mechanisms.

Suggested Citation

  • Gianpiero Evola & Vincenzo Costanzo & Luigi Marletta, 2021. "Hygrothermal and Acoustic Performance of Two Innovative Envelope Renovation Solutions Developed in the e-SAFE Project," Energies, MDPI, vol. 14(13), pages 1-19, July.
    • Handle: RePEc:gam:jeners:v:14:y:2021:i:13:p:4006-:d:587832
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/14/13/4006/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/14/13/4006/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Eleftheria Touloupaki & Theodoros Theodosiou, 2017. "Optimization of External Envelope Insulation Thickness: A Parametric Study," Energies, MDPI, vol. 10(3), pages 1-19, February.
    2. David Bienvenido-Huertas & Miguel Oliveira & Carlos Rubio-Bellido & David Marín, 2019. "A Comparative Analysis of the International Regulation of Thermal Properties in Building Envelope," Sustainability, MDPI, vol. 11(20), pages 1-30, October.
    3. Paolo La Greca & Giuseppe Margani, 2018. "Seismic and Energy Renovation Measures for Sustainable Cities: A Critical Analysis of the Italian Scenario," Sustainability, MDPI, vol. 10(1), pages 1-19, January.
    4. Giuseppe Margani & Gianpiero Evola & Carola Tardo & Edoardo Michele Marino, 2020. "Energy, Seismic, and Architectural Renovation of RC Framed Buildings with Prefabricated Timber Panels," Sustainability, MDPI, vol. 12(12), pages 1-18, June.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Alessandra Urso & Vincenzo Costanzo & Francesco Nocera & Gianpiero Evola, 2022. "Moisture-Related Risks in Wood-Based Retrofit Solutions in a Mediterranean Climate: Design Recommendations," Sustainability, MDPI, vol. 14(22), pages 1-18, November.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Luca Pozza & Anna Degli Esposti & Alessandra Bonoli & Diego Talledo & Luca Barbaresi & Giovanni Semprini & Marco Savoia, 2021. "Multidisciplinary Performance Assessment of an Eco-Sustainable RC-Framed Skin for the Integrated Upgrading of Existing Buildings," Sustainability, MDPI, vol. 13(16), pages 1-20, August.
    2. Amedeo Caprino & Filippo Lorenzoni & Laura Carnieletto & Leonardo Feletto & Michele De Carli & Francesca da Porto, 2021. "Integrated Seismic and Energy Retrofit Interventions on a URM Masonry Building: The Case Study of the Former Courthouse in Fabriano," Sustainability, MDPI, vol. 13(17), pages 1-30, August.
    3. Roberta Pernetti & Riccardo Pinotti & Roberto Lollini, 2021. "Repository of Deep Renovation Packages Based on Industrialized Solutions: Definition and Application," Sustainability, MDPI, vol. 13(11), pages 1-18, June.
    4. Emil-Sever Georgescu & Mihaela Stela Georgescu & Zina Macri & Edoardo Michele Marino & Giuseppe Margani & Vasile Meita & Radu Pana & Santi Maria Cascone & Horia Petran & Pier Paolo Rossi & Vincenzo Sa, 2018. "Seismic and Energy Renovation: A Review of the Code Requirements and Solutions in Italy and Romania," Sustainability, MDPI, vol. 10(5), pages 1-36, May.
    5. Antonio Artino & Riccardo Caponetto & Gianpiero Evola & Giuseppe Margani & Edoardo Michele Marino & Emanuele Murgano, 2020. "Decision Support System for the Sustainable Seismic and Energy Renovation of Buildings: Methodological Layout," Sustainability, MDPI, vol. 12(24), pages 1-21, December.
    6. Rayane de Lima Moura Paiva & Lucas Rosse Caldas & Adriana Paiva de Souza Martins & Patricia Brandão de Sousa & Giulia Fea de Oliveira & Romildo Dias Toledo Filho, 2021. "Thermal-Energy Analysis and Life Cycle GHG Emissions Assessments of Innovative Earth-Based Bamboo Plastering Mortars," Sustainability, MDPI, vol. 13(18), pages 1-24, September.
    7. Kaiser Ahmed & Margaux Carlier & Christian Feldmann & Jarek Kurnitski, 2018. "A New Method for Contrasting Energy Performance and Near-Zero Energy Building Requirements in Different Climates and Countries," Energies, MDPI, vol. 11(6), pages 1-22, May.
    8. Giuseppe Margani & Gianpiero Evola & Carola Tardo & Edoardo Michele Marino, 2020. "Energy, Seismic, and Architectural Renovation of RC Framed Buildings with Prefabricated Timber Panels," Sustainability, MDPI, vol. 12(12), pages 1-18, June.
    9. David Bienvenido-Huertas, 2020. "Assessing the Environmental Impact of Thermal Transmittance Tests Performed in Façades of Existing Buildings: The Case of Spain," Sustainability, MDPI, vol. 12(15), pages 1-18, August.
    10. Francesco Smiroldo & Isabella Paviani & Ivan Giongo & Stefano Zanon & Rossano Albatici & Maurizio Piazza, 2021. "An Integrated Approach to Improve Seismic and Energetic Behaviour of RC Framed Buildings Using Timber Panels," Sustainability, MDPI, vol. 13(20), pages 1-27, October.
    11. Samira Rastbod & Farnaz Rahimi & Yara Dehghan & Saeed Kamranfar & Omrane Benjeddou & Moncef L. Nehdi, 2022. "An Optimized Machine Learning Approach for Forecasting Thermal Energy Demand of Buildings," Sustainability, MDPI, vol. 15(1), pages 1-15, December.
    12. Zenonas Turskis & Nikolaj Goranin & Assel Nurusheva & Seilkhan Boranbayev, 2019. "A Fuzzy WASPAS-Based Approach to Determine Critical Information Infrastructures of EU Sustainable Development," Sustainability, MDPI, vol. 11(2), pages 1-25, January.
    13. Riccardo Privitera & Daniele La Rosa, 2018. "Reducing Seismic Vulnerability and Energy Demand of Cities through Green Infrastructure," Sustainability, MDPI, vol. 10(8), pages 1-21, July.
    14. Jacopo Zanni & Stefano Cademartori & Alessandra Marini & Andrea Belleri & Chiara Passoni & Ezio Giuriani & Paolo Riva & Barbara Angi & Giovanni Brumana & Angelo Luigi Marchetti, 2021. "Integrated Deep Renovation of Existing Buildings with Prefabricated Shell Exoskeleton," Sustainability, MDPI, vol. 13(20), pages 1-27, October.
    15. Darija Gajić & Slobodan Peulić & Tim Mavrič & Anna Sandak & Črtomir Tavzes & Milica Malešević & Mladen Slijepčević, 2021. "Energy Retrofitting Opportunities Using Renewable Materials—Comparative Analysis of the Current Frameworks in Bosnia-Herzegovina and Slovenia," Sustainability, MDPI, vol. 13(2), pages 1-19, January.
    16. Chen, Hongyu & Shen, Geoffrey Qiping & Feng, Zongbao & Liu, Yang, 2024. "Optimization of energy-saving retrofit solutions for existing buildings: A multidimensional data fusion approach," Renewable and Sustainable Energy Reviews, Elsevier, vol. 201(C).
    17. Stelladriana Volpe & Valentino Sangiorgio & Andrea Petrella & Armando Coppola & Michele Notarnicola & Francesco Fiorito, 2021. "Building Envelope Prefabricated with 3D Printing Technology," Sustainability, MDPI, vol. 13(16), pages 1-13, August.
    18. Miłosz Raczyński & Radosław Rutkowski, 2020. "How Pro-Environmental Legal Regulations Affect the Design Process and Management of Multi-Family Residential Buildings in Poland," Energies, MDPI, vol. 13(20), pages 1-23, October.
    19. Sebastiano D’Urso & Bruno Cicero, 2019. "From the Efficiency of Nature to Parametric Design. A Holistic Approach for Sustainable Building Renovation in Seismic Regions," Sustainability, MDPI, vol. 11(5), pages 1-20, February.
    20. Tiziana Basiricò & Daniele Enea, 2018. "Seismic and Energy Retrofit of the Historic Urban Fabric of Enna (Italy)," Sustainability, MDPI, vol. 10(4), pages 1-20, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:14:y:2021:i:13:p:4006-:d:587832. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.