IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i3p652-d316076.html
   My bibliography  Save this article

Optimization of Cold Pressing Process Parameters of Chopped Corn Straws for Fuel

Author

Listed:
  • Tianyou Chen

    (School of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China)

  • Honglei Jia

    (School of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China
    Key Laboratory of Bionic Engineering, Ministry of Education, Jilin University, Changchun 130022, China)

  • Shengwei Zhang

    (School of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China)

  • Xumin Sun

    (School of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China)

  • Yuqiu Song

    (College of Engineering, Shenyang Agricultural University, Shenyang 110866, China)

  • Hongfang Yuan

    (School of Biological and Agricultural Engineering, Jilin University, Changchun 130022, China)

Abstract

Pressed condensation is a key process before the reclamation of loose corn straws. In this study, the effects of stabilization time on the relaxation density and dimensional stability of corn straws were studied firstly, and then the stabilization time was determined to be 60 s by comprehensively considering the compression effect, energy consumption, efficiency and significance. On this basis, the effects of the water content (12%, 15%, 18%), ratio of pressure maintenance time to stabilization time (0, 0.5, 1), maximum compression stress (60.4, 120.8, 181.2 kPa) and feeding mass (2.5, 3, 3.5 kg) on the relaxation density, dimensional stability coefficient, and specific energy consumption of post-compression straw blocks were investigated by the Box–Behnken design. It was found that the water content, ratio of pressure maintenance time to stabilization time, maximum compression stress, and feeding mass all very significantly affected the relaxation density, dimensional stability coefficient and specific energy consumption. The interaction between water content and maximum compression stress significantly affected both relaxation density and specific energy consumption. The interaction between the ratio of pressure maintenance time to stabilization time and feeding mass significantly affected the dimensional stability coefficient. The factors and the indices were regressed by quadratic equations, with the coefficients of determination larger than 0.97 in all equations. The optimized process parameters were water content of 13.63%, pressure maintenance time of 22.8 s, strain maintenance time of 37.2 s, maximum compression stress of 109.58 kPa, and raw material feeding mass of 3.5 kg. Under these conditions, the relaxation density of cold-pressed straw blocks was 145.63 kg/m 3 , the dimensional stability coefficient was 86.89%, and specific energy consumption was 245.78 J/kg. The errors between test results and predicted results were less than 2%. The low calorific value of cold-pressed chopped corn straw blocks was 12.8 MJ/kg. Through the situational analysis method based on the internal and external competition environments and competition conditions (SWOT analysis method), the cold-pressed chopped corn straw blocks consumed the lowest forming energy consumption than other forming methods and, thus, are feasible for heating by farmers. Our findings may provide a reference for corn straw bundling, cold-press forming processes and straw bale re-compressing.

Suggested Citation

  • Tianyou Chen & Honglei Jia & Shengwei Zhang & Xumin Sun & Yuqiu Song & Hongfang Yuan, 2020. "Optimization of Cold Pressing Process Parameters of Chopped Corn Straws for Fuel," Energies, MDPI, vol. 13(3), pages 1-21, February.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:3:p:652-:d:316076
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/3/652/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/3/652/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Bogdan Saletnik & Grzegorz Zagula & Marcin Bajcar & Maria Czernicka & Czeslaw Puchalski, 2018. "Biochar and Biomass Ash as a Soil Ameliorant: The Effect on Selected Soil Properties and Yield of Giant Miscanthus (Miscanthus x giganteus)," Energies, MDPI, vol. 11(10), pages 1-24, September.
    2. Ehsan Houshfar & Terese Løvås & Øyvind Skreiberg, 2012. "Experimental Investigation on NO x Reduction by Primary Measures in Biomass Combustion: Straw, Peat, Sewage Sludge, Forest Residues and Wood Pellets," Energies, MDPI, vol. 5(2), pages 1-21, February.
    3. Mostafa, Mohamed E. & Hu, Song & Wang, Yi & Su, Sheng & Hu, Xun & Elsayed, Saad A. & Xiang, Jun, 2019. "The significance of pelletization operating conditions: An analysis of physical and mechanical characteristics as well as energy consumption of biomass pellets," Renewable and Sustainable Energy Reviews, Elsevier, vol. 105(C), pages 332-348.
    4. Grzegorz Zając & Joanna Szyszlak-Bargłowicz & Wojciech Gołębiowski & Małgorzata Szczepanik, 2018. "Chemical Characteristics of Biomass Ashes," Energies, MDPI, vol. 11(11), pages 1-15, October.
    5. Zvicevičius, Egidijus & Raila, Algirdas & Čiplienė, Aušra & Černiauskienė, Živilė & Kadžiulienė, Žydrė & Tilvikienė, Vita, 2018. "Effects of moisture and pressure on densification process of raw material from Artemisia dubia Wall," Renewable Energy, Elsevier, vol. 119(C), pages 185-192.
    6. Brand, Martha Andreia & Jacinto, Rodolfo Cardoso & Antunes, Rodrigo & da Cunha, Alexsandro Bayestorff, 2017. "Production of briquettes as a tool to optimize the use of waste from rice cultivation and industrial processing," Renewable Energy, Elsevier, vol. 111(C), pages 116-123.
    7. Christof Lanzerstorfer, 2019. "Combustion of Miscanthus: Composition of the Ash by Particle Size," Energies, MDPI, vol. 12(1), pages 1-12, January.
    8. Lisowski, Aleksander & Pajor, Małgorzata & Świętochowski, Adam & Dąbrowska, Magdalena & Klonowski, Jacek & Mieszkalski, Leszek & Ekielski, Adam & Stasiak, Mateusz & Piątek, Michał, 2019. "Effects of moisture content, temperature, and die thickness on the compaction process, and the density and strength of walnut shell pellets," Renewable Energy, Elsevier, vol. 141(C), pages 770-781.
    9. Yixiang Zhang & Zongxi Zhang & Yuguang Zhou & Renjie Dong, 2018. "The Influences of Various Testing Conditions on the Evaluation of Household Biomass Pellet Fuel Combustion," Energies, MDPI, vol. 11(5), pages 1-11, May.
    10. Saad A El-Sayed & Mohammed Khairy Elsaid Mohamed, 2018. "Mechanical properties and characteristics of wheat straw and pellets," Energy & Environment, , vol. 29(7), pages 1224-1246, November.
    11. Renata Marks-Bielska & Stanisław Bielski & Anastasija Novikova & Kęstutis Romaneckas, 2019. "Straw Stocks as a Source of Renewable Energy. A Case Study of a District in Poland," Sustainability, MDPI, vol. 11(17), pages 1-18, August.
    12. Jaya Shankar Tumuluru, 2019. "Pelleting of Pine and Switchgrass Blends: Effect of Process Variables and Blend Ratio on the Pellet Quality and Energy Consumption," Energies, MDPI, vol. 12(7), pages 1-26, March.
    13. Giuseppe Toscano & Vincenzo Alfano & Antonio Scarfone & Luigi Pari, 2018. "Pelleting Vineyard Pruning at Low Cost with a Mobile Technology," Energies, MDPI, vol. 11(9), pages 1-17, September.
    14. Andrzej Greinert & Maria Mrówczyńska & Wojciech Szefner, 2019. "Study on the Possibilities of Natural Use of Ash Granulate Obtained from the Combustion of Pellets from Plant Biomass," Energies, MDPI, vol. 12(13), pages 1-19, July.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Shuren Chen & Yunfei Zhao & Zhong Tang & Hantao Ding & Zhan Su & Zhao Ding, 2022. "Structural Model of Straw Briquetting Machine with Vertical Ring Die and Optimization of Briquetting Performance," Agriculture, MDPI, vol. 12(5), pages 1-15, May.
    2. Jun Fu & Jian Li & Xinlong Tang & Ruixue Wang & Zhi Chen, 2021. "Optimization of Structure Parameters of the Grouser Shoes for Adhesion Reduction under Black Soil," Agriculture, MDPI, vol. 11(8), pages 1-13, August.
    3. Rangling Li & Hongying Wang & Enze Duan & Jiayu Fan & Liangju Wang, 2022. "Rabbit Manure Compost for Seedling Nursery Blocks: Suitability and Optimization of the Manufacturing Production Process," Agriculture, MDPI, vol. 12(12), pages 1-17, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Andrzej Greinert & Maria Mrówczyńska & Radosław Grech & Wojciech Szefner, 2020. "The Use of Plant Biomass Pellets for Energy Production by Combustion in Dedicated Furnaces," Energies, MDPI, vol. 13(2), pages 1-17, January.
    2. Andrzej Greinert & Maria Mrówczyńska & Wojciech Szefner, 2019. "Study on the Possibilities of Natural Use of Ash Granulate Obtained from the Combustion of Pellets from Plant Biomass," Energies, MDPI, vol. 12(13), pages 1-19, July.
    3. Izabella Maj & Krzysztof Matus, 2023. "Aluminosilicate Clay Minerals: Kaolin, Bentonite, and Halloysite as Fuel Additives for Thermal Conversion of Biomass and Waste," Energies, MDPI, vol. 16(11), pages 1-17, May.
    4. Wojciech Rzeźnik & Ilona Rzeźnik & Paulina Mielcarek-Bocheńska & Mateusz Urbański, 2023. "Air Pollutants Emission during Co-Combustion of Animal Manure and Wood Pellets in 15 kW Boiler," Energies, MDPI, vol. 16(18), pages 1-17, September.
    5. Sergio Paniagua & Alba Prado-Guerra & Ana Isabel Neto & Teresa Nunes & Luís Tarelho & Célia Alves & Luis Fernando Calvo, 2020. "Influence of Varieties and Organic Fertilizer in the Elaboration of a New Poplar-Straw Pellet and Its Emissions in a Domestic Boiler," Energies, MDPI, vol. 13(23), pages 1-17, November.
    6. Jianbiao Liu & Xuya Jiang & Yanhao Yuan & Huanhuan Chen & Wenbin Zhang & Hongzhen Cai & Feng Gao, 2022. "Densification of Yak Manure Biofuel Pellets and Evaluation of Parameters: Effects on Properties," Energies, MDPI, vol. 15(5), pages 1-14, February.
    7. Elżbieta Jarosz-Krzemińska & Joanna Poluszyńska, 2020. "Repurposing Fly Ash Derived from Biomass Combustion in Fluidized Bed Boilers in Large Energy Power Plants as a Mineral Soil Amendment," Energies, MDPI, vol. 13(18), pages 1-21, September.
    8. Liza Nuriati Lim Kim Choo & Osumanu Haruna Ahmed & Nik Muhamad Nik Majid & Zakry Fitri Abd Aziz, 2021. "Pineapple Residue Ash Reduces Carbon Dioxide and Nitrous Oxide Emissions in Pineapple Cultivation on Tropical Peat Soils at Saratok, Malaysia," Sustainability, MDPI, vol. 13(3), pages 1-23, January.
    9. Pegoretti Leite de Souza, Hector Jesus & Muñoz, Fernando & Mendonça, Regis Teixeira & Sáez, Katia & Olave, Rodrigo & Segura, Cristina & de Souza, Daniel P.L. & de Paula Protásio, Thiago & Rodríguez-So, 2021. "Influence of lignin distribution, physicochemical characteristics and microstructure on the quality of biofuel pellets made from four different types of biomass," Renewable Energy, Elsevier, vol. 163(C), pages 1802-1816.
    10. Yılmaz, Hasan & Çanakcı, Murad & Topakcı, Mehmet & Karayel, Davut & Yiğit, Mete & Ortaçeşme, Derya, 2023. "In-situ pelletization of campus biomass residues: Case study for Akdeniz University," Renewable Energy, Elsevier, vol. 212(C), pages 972-983.
    11. Rodolfo Picchio & Francesco Latterini & Rachele Venanzi & Walter Stefanoni & Alessandro Suardi & Damiano Tocci & Luigi Pari, 2020. "Pellet Production from Woody and Non-Woody Feedstocks: A Review on Biomass Quality Evaluation," Energies, MDPI, vol. 13(11), pages 1-20, June.
    12. Granado, Marcos Paulo Patta & Suhogusoff, Yuri Valentinovich Machado & Santos, Luis Ricardo Oliveira & Yamaji, Fabio Minoru & De Conti, Andrea Cressoni, 2021. "Effects of pressure densification on strength and properties of cassava waste briquettes," Renewable Energy, Elsevier, vol. 167(C), pages 306-312.
    13. Pérez, Alejandro & Ruiz, Begoña & Fuente, Enrique & Calvo, Luis Fernando & Paniagua, Sergio, 2021. "Pyrolysis technology for Cortaderia selloana invasive species. Prospects in the biomass energy sector," Renewable Energy, Elsevier, vol. 169(C), pages 178-190.
    14. Andrzej Greinert & Maria Mrówczyńska & Wojciech Szefner, 2019. "The Use of Waste Biomass from the Wood Industry and Municipal Sources for Energy Production," Sustainability, MDPI, vol. 11(11), pages 1-19, May.
    15. Bruno Rafael de Almeida Moreira & Ronaldo da Silva Viana & Victor Hugo Cruz & Paulo Renato Matos Lopes & Celso Tadao Miasaki & Anderson Chagas Magalhães & Paulo Alexandre Monteiro de Figueiredo & Luca, 2020. "Anti-Thermal Shock Binding of Liquid-State Food Waste to Non-Wood Pellets," Energies, MDPI, vol. 13(12), pages 1-26, June.
    16. Dubis, Bogdan & Jankowski, Krzysztof Józef & Załuski, Dariusz & Sokólski, Mateusz, 2020. "The effect of sewage sludge fertilization on the biomass yield of giant miscanthus and the energy balance of the production process," Energy, Elsevier, vol. 206(C).
    17. Stančin, H. & Mikulčić, H. & Wang, X. & Duić, N., 2020. "A review on alternative fuels in future energy system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 128(C).
    18. Ras Izzati Ismail & Chu Yee Khor & Alina Rahayu Mohamed, 2023. "Pelletization Temperature and Pressure Effects on the Mechanical Properties of Khaya senegalensis Biomass Energy Pellets," Sustainability, MDPI, vol. 15(9), pages 1-12, May.
    19. Mohsen Jamali & Esmaeil Bakhshandeh & Mohammad Yaghoubi Khanghahi & Carmine Crecchio, 2021. "Metadata Analysis to Evaluate Environmental Impacts of Wheat Residues Burning on Soil Quality in Developing and Developed Countries," Sustainability, MDPI, vol. 13(11), pages 1-13, June.
    20. Dan Liu & Da Teng & Yan Zhu & Xingde Wang & Hanyang Wang, 2023. "Optimization of Process Parameters for Pellet Production from Corn Stalk Rinds Using Box–Behnken Design," Energies, MDPI, vol. 16(12), pages 1-20, June.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:3:p:652-:d:316076. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.