IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v11y2018i9p2299-d166983.html
   My bibliography  Save this article

Design of Multilayer Ring Emitter Based on Metamaterial for Thermophotovoltaic Applications

Author

Listed:
  • Fekadu Tolessa Maremi

    (Department of Mechanical Engineering, Yonsei University, Seoul 03722, Korea)

  • Namkyu Lee

    (Department of Mechanical Engineering, Yonsei University, Seoul 03722, Korea)

  • Geehong Choi

    (Department of Mechanical Engineering, Yonsei University, Seoul 03722, Korea)

  • Taehwan Kim

    (Semiconductor R&D Center, Samsung Electronics Inc., Suwon 18448, Korea)

  • Hyung Hee Cho

    (Department of Mechanical Engineering, Yonsei University, Seoul 03722, Korea)

Abstract

The objective of this study is to design a broadband and wide-angle emitter based on metamaterials with a cut-off wavelength of 2.1 µm to improve the spectral efficiency of thermophotovoltaic emitters. To obtain broadband emission, we conducted the geometric parameter optimization of the number of stacked layers, the inner and outer radii of the nano-rings, and the thickness of the nano-rings. The numerical simulation results showed that the proposed emitter had an average emissivity of 0.97 within the targeted wavelength, which ranged from 0.2 µm to 2.1 µm. In addition, the presented multilayer nano-ring emitter obtained 79.6% spectral efficiency with an InGaAs band gap of 0.6 eV at 1400 K.

Suggested Citation

  • Fekadu Tolessa Maremi & Namkyu Lee & Geehong Choi & Taehwan Kim & Hyung Hee Cho, 2018. "Design of Multilayer Ring Emitter Based on Metamaterial for Thermophotovoltaic Applications," Energies, MDPI, vol. 11(9), pages 1-9, August.
  • Handle: RePEc:gam:jeners:v:11:y:2018:i:9:p:2299-:d:166983
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/11/9/2299/pdf
    Download Restriction: no

    File URL: https://www.mdpi.com/1996-1073/11/9/2299/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Ferrari, Claudio & Melino, Francesco & Pinelli, Michele & Spina, Pier Ruggero, 2014. "Thermophotovoltaic energy conversion: Analytical aspects, prototypes and experiences," Applied Energy, Elsevier, vol. 113(C), pages 1717-1730.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chukwuma Ogbonnaya & Chamil Abeykoon & Adel Nasser & Ali Turan, 2020. "Radiation-Thermodynamic Modelling and Simulating the Core of a Thermophotovoltaic System," Energies, MDPI, vol. 13(22), pages 1-15, November.
    2. Zejia Liu & Zigui Zhang & Peifeng Xie & Zibo Miao, 2022. "Design of Selective TPV Thermal Emitters Based on Bayesian Optimization Nesting Simulated Annealing," Energies, MDPI, vol. 16(1), pages 1-16, December.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Tian Zhou & Zhiqiang Sun & Saiwei Li & Huawei Liu & Danqing Yi, 2016. "Design and Optimization of Thermophotovoltaic System Cavity with Mirrors," Energies, MDPI, vol. 9(9), pages 1-11, September.
    2. Hussain, C.M. Iftekhar & Duffy, Aidan & Norton, Brian, 2020. "Thermophotovoltaic systems for achieving high-solar-fraction hybrid solar-biomass power generation," Applied Energy, Elsevier, vol. 259(C).
    3. Peng, Qingguo & Yang, Wenming & E, Jiaqiang & Li, Shaobo & Li, Zhenwei & Xu, Hongpeng & Fu, Guang, 2021. "Effects of propane addition and burner scale on the combustion characteristics and working performance," Applied Energy, Elsevier, vol. 285(C).
    4. Zhu, Shunmin & Yu, Guoyao & O, Jongmin & Xu, Tao & Wu, Zhanghua & Dai, Wei & Luo, Ercang, 2018. "Modeling and experimental investigation of a free-piston Stirling engine-based micro-combined heat and power system," Applied Energy, Elsevier, vol. 226(C), pages 522-533.
    5. Shan, Shiquan & Tian, Jialu & Chen, Binghong & Zhang, Yanwei & Zhou, Zhijun, 2023. "Theoretical and technical analysis of the photo-thermal energy cascade conversion for fuel with high-temperature combustion," Energy, Elsevier, vol. 263(PD).
    6. Qiu, K. & Hayden, A.C.S., 2014. "Implementation of a TPV integrated boiler for micro-CHP in residential buildings," Applied Energy, Elsevier, vol. 134(C), pages 143-149.
    7. Zhang, Chao & Tang, Liangliang & Liu, Yan & Liu, Zhuming & Liu, Wei & Qiu, Kuanrong, 2020. "A novel thermophotovoltaic optical cavity for improved irradiance uniformity and system performance," Energy, Elsevier, vol. 195(C).
    8. Wu, H. & Kaviany, M. & Kwon, O.C., 2018. "Thermophotovoltaic power conversion using a superadiabatic radiant burner," Applied Energy, Elsevier, vol. 209(C), pages 392-399.
    9. Wijewardane, S. & Goswami, Yogi, 2014. "Extended exergy concept to facilitate designing and optimization of frequency-dependent direct energy conversion systems," Applied Energy, Elsevier, vol. 134(C), pages 204-214.
    10. Chukwuma Ogbonnaya & Chamil Abeykoon & Adel Nasser & Ali Turan, 2020. "Radiation-Thermodynamic Modelling and Simulating the Core of a Thermophotovoltaic System," Energies, MDPI, vol. 13(22), pages 1-15, November.
    11. Peng, Qingguo & Yang, Wenming & E, Jiaqiang & Xu, Hongpeng & Li, Zhenwei & Tay, Kunlin & Zeng, Guang & Yu, Wenbin, 2020. "Investigation on premixed H2/C3H8/air combustion in porous medium combustor for the micro thermophotovoltaic application," Applied Energy, Elsevier, vol. 260(C).
    12. Li, Yueh-Heng & Hong, Jing-Ru, 2018. "Performance assessment of catalytic combustion-driven thermophotovoltaic platinum tubular reactor," Applied Energy, Elsevier, vol. 211(C), pages 843-853.
    13. Liu, Z. & Qiu, K., 2017. "A TPV power system consisting of a composite radiant burner and combined cells," Energy, Elsevier, vol. 141(C), pages 892-897.
    14. Wang, Hongyu & Xu, Zhiheng & Wang, Chen & Hou, Zongbin & Bian, Mingxin & Zhuang, Nailiang & Tao, Haijun & Wang, Yuqiao & Tang, Xiaobin, 2024. "Optimized design and application performance analysis of heat recovery hybrid system for radioisotope thermophotovoltaic based on thermoelectric heat dissipation," Applied Energy, Elsevier, vol. 355(C).
    15. Hajialigol, Parisa & Fathi, Amirhossein & Saboohi, Yadollah, 2021. "Modeling and optimization of an integrated multi-generation solar system with variable heat to power ratio for supplying residential and industrial demands," Renewable Energy, Elsevier, vol. 174(C), pages 786-798.
    16. Wang, Hao & Peng, Qingguo & Tian, Xinghua & Yan, Feng & Wei, Depeng & Liu, Hui, 2024. "Experimental and numerical investigation on H2-fueled micro-thermophotovoltaic with CH4 and C3H8 blending in a tube fully/partially inserted porous media," Renewable and Sustainable Energy Reviews, Elsevier, vol. 191(C).
    17. Mustafa, K.F. & Abdullah, S. & Abdullah, M.Z. & Sopian, K., 2017. "A review of combustion-driven thermoelectric (TE) and thermophotovoltaic (TPV) power systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 71(C), pages 572-584.
    18. Daneshvar, Hoofar & Prinja, Rajiv & Kherani, Nazir P., 2015. "Thermophotovoltaics: Fundamentals, challenges and prospects," Applied Energy, Elsevier, vol. 159(C), pages 560-575.
    19. He, Ziqiang & Yan, Yunfei & Zhao, Ting & Zhang, Zhien & Mikulčić, Hrvoje, 2022. "Parametric study of inserting internal spiral fins on the micro combustor performance for thermophotovoltaic systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 165(C).
    20. Gentillon, Philippe & Singh, Siddharth & Lakshman, Suhas & Zhang, Zhaolun & Paduthol, Appu & Ekins-Daukes, N.J. & Chan, Qing N. & Taylor, Robert A., 2019. "A comprehensive experimental characterisation of a novel porous media combustion-based thermophotovoltaic system with controlled emission," Applied Energy, Elsevier, vol. 254(C).

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:11:y:2018:i:9:p:2299-:d:166983. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.