IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v54y2016icp889-917.html
   My bibliography  Save this article

Open solid desiccant cooling air systems: A review and comparative study

Author

Listed:
  • Zouaoui, Ahlem
  • Zili-Ghedira, Leila
  • Ben Nasrallah, Sassi

Abstract

The present work is an overview of new methods aimed to provide air conditioning while avoiding CFC emissions by using low grade energy such as solar energy or waste heat. It deals as well with heat and mass transfers in these installations; the desiccant cooling installations composed mainly of a desiccant bed, a heat exchanger and a humidifier. The ventilated air is cooled through these installations to reduce its temperature and adjust its humidity. In this study a cylindrical fixed bed is used instead of a desiccant wheel. The liability and efficiency of the established numerical tool was tested and validated by comparison against numerical and experimental works from the literature. The aim is to give insight on the different desiccant cooling installations by a general literature survey and also to study numerically different configurations of desiccant cooling systems. The temporal evolution of air temperature and humidity at the exit of each element of the desiccant cooling installations were plotted and analyzed.

Suggested Citation

  • Zouaoui, Ahlem & Zili-Ghedira, Leila & Ben Nasrallah, Sassi, 2016. "Open solid desiccant cooling air systems: A review and comparative study," Renewable and Sustainable Energy Reviews, Elsevier, vol. 54(C), pages 889-917.
    • Handle: RePEc:eee:rensus:v:54:y:2016:i:c:p:889-917
    DOI: 10.1016/j.rser.2015.10.055
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S136403211501134X
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2015.10.055?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Bolaji, B.O. & Huan, Z., 2013. "Ozone depletion and global warming: Case for the use of natural refrigerant – a review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 18(C), pages 49-54.
    2. Barrios, Salvador & Bertinelli, Luisito & Strobl, Eric, 2006. "Climatic change and rural-urban migration: The case of sub-Saharan Africa," Journal of Urban Economics, Elsevier, vol. 60(3), pages 357-371, November.
    3. Mei, Li & Infield, David & Eicker, Ursula & Loveday, Dennis & Fux, Volker, 2006. "Cooling potential of ventilated PV façade and solar air heaters combined with a desiccant cooling machine," Renewable Energy, Elsevier, vol. 31(8), pages 1265-1278.
    4. Stabat, Pascal & Marchio, Dominique, 2009. "Heat and mass transfer modeling in rotary desiccant dehumidifiers," Applied Energy, Elsevier, vol. 86(5), pages 762-771, May.
    5. Green, Chris & Baksi, Soham & Dilmaghani, Maryam, 2007. "Challenges to a climate stabilizing energy future," Energy Policy, Elsevier, vol. 35(1), pages 616-626, January.
    6. Baniyounes, Ali M. & Liu, Gang & Rasul, M.G. & Khan, M.M.K., 2012. "Analysis of solar desiccant cooling system for an institutional building in subtropical Queensland, Australia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(8), pages 6423-6431.
    7. Silveira, Jaylson J. & Espíndola, Aquino L. & Penna, T.J.P., 2006. "Agent-based model to rural–urban migration analysis," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 364(C), pages 445-456.
    8. La, D. & Li, Y. & Dai, Y.J. & Ge, T.S. & Wang, R.Z., 2012. "Development of a novel rotary desiccant cooling cycle with isothermal dehumidification and regenerative evaporative cooling using thermodynamic analysis method," Energy, Elsevier, vol. 44(1), pages 778-791.
    9. Baniyounes, Ali M. & Rasul, M.G. & Khan, M.M.K., 2013. "Assessment of solar assisted air conditioning in Central Queensland's subtropical climate, Australia," Renewable Energy, Elsevier, vol. 50(C), pages 334-341.
    10. Cui, Qun & Chen, Haijun & Tao, Gang & Yao, Huqing, 2005. "Performance study of new adsorbent for solid desiccant cooling," Energy, Elsevier, vol. 30(2), pages 273-279.
    11. Kabeel, A.E., 2009. "Adsorption–desorption operations of multilayer desiccant packed bed for dehumidification applications," Renewable Energy, Elsevier, vol. 34(1), pages 255-265.
    12. Zhang, L.Z & Niu, J.L, 2003. "A pre-cooling Munters environmental control desiccant cooling cycle in combination with chilled-ceiling panels," Energy, Elsevier, vol. 28(3), pages 275-292.
    13. Hamed, Ahmed M., 2005. "Experimental investigation on the adsorption/desorption processes using solid desiccant in an inclined-fluidized bed," Renewable Energy, Elsevier, vol. 30(12), pages 1913-1921.
    14. Nóbrega, C.E.L. & Brum, N.C.L., 2011. "A graphical procedure for desiccant cooling cycle design," Energy, Elsevier, vol. 36(3), pages 1564-1570.
    15. La, D. & Dai, Y.J. & Li, Y. & Wang, R.Z. & Ge, T.S., 2010. "Technical development of rotary desiccant dehumidification and air conditioning: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 130-147, January.
    16. Eicker, Ursula & Schneider, Dietrich & Schumacher, Jürgen & Ge, Tianshu & Dai, Yanjun, 2010. "Operational experiences with solar air collector driven desiccant cooling systems," Applied Energy, Elsevier, vol. 87(12), pages 3735-3747, December.
    17. James Edmonds, 2004. "Climate Change and Energy Technologies," Mitigation and Adaptation Strategies for Global Change, Springer, vol. 9(4), pages 391-416, October.
    18. Enteria, Napoleon & Mizutani, Kunio, 2011. "The role of the thermally activated desiccant cooling technologies in the issue of energy and environment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(4), pages 2095-2122, May.
    19. Maheshwari, G. P. & Al-Ragom, F. & Suri, R. K., 2001. "Energy-saving potential of an indirect evaporative cooler," Applied Energy, Elsevier, vol. 69(1), pages 69-76, May.
    20. Ahmed, M.H. & Kattab, N.M. & Fouad, M., 2005. "Evaluation and optimization of solar desiccant wheel performance," Renewable Energy, Elsevier, vol. 30(3), pages 305-325.
    21. Baniyounes, Ali M. & Liu, Gang & Rasul, M.G. & Khan, M.M.K., 2013. "Comparison study of solar cooling technologies for an institutional building in subtropical Queensland, Australia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 23(C), pages 421-430.
    22. Lee, S.H. & Lee, W.L., 2013. "Site verification and modeling of desiccant-based system as an alternative to conventional air-conditioning systems for wet markets," Energy, Elsevier, vol. 55(C), pages 1076-1083.
    23. Ge, T.S. & Dai, Y.J. & Wang, R.Z., 2014. "Review on solar powered rotary desiccant wheel cooling system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 39(C), pages 476-497.
    24. Panaras, G. & Mathioulakis, E. & Belessiotis, V. & Kyriakis, N., 2010. "Theoretical and experimental investigation of the performance of a desiccant air-conditioning system," Renewable Energy, Elsevier, vol. 35(7), pages 1368-1375.
    25. Panaras, G. & Mathioulakis, E. & Belessiotis, V., 2011. "Solid desiccant air-conditioning systems – Design parameters," Energy, Elsevier, vol. 36(5), pages 2399-2406.
    26. Sultan, Muhammad & El-Sharkawy, Ibrahim I. & Miyazaki, Takahiko & Saha, Bidyut Baran & Koyama, Shigeru, 2015. "An overview of solid desiccant dehumidification and air conditioning systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 46(C), pages 16-29.
    27. Daou, K. & Wang, R.Z. & Xia, Z.Z., 2006. "Desiccant cooling air conditioning: a review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 10(2), pages 55-77, April.
    28. Luken, Ralph & Grof, Tamas, 2006. "The Montreal Protocol's multilateral fund and sustainable development," Ecological Economics, Elsevier, vol. 56(2), pages 241-255, February.
    29. Boopathi Raja, V. & Shanmugam, V., 2012. "A review and new approach to minimize the cost of solar assisted absorption cooling system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(9), pages 6725-6731.
    30. Dai, Y.J. & Wang, R.Z. & Xu, Y.X., 2002. "Study of a solar powered solid adsorption–desiccant cooling system used for grain storage," Renewable Energy, Elsevier, vol. 25(3), pages 417-430.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Abou-Ziyan, H. & Abd El-Raheim, D. & Mahmoud, O. & Fatouh, M., 2017. "Performance characteristics of thin-multilayer activated alumina bed," Applied Energy, Elsevier, vol. 190(C), pages 29-42.
    2. Behnam Roshanzadeh & Levi Reyes Premer & Gowtham Mohan, 2022. "Developing an Advanced PVT System for Sustainable Domestic Hot Water Supply," Energies, MDPI, vol. 15(7), pages 1-17, March.
    3. Zhang, J.Y. & Ge, T.S. & Dai, Y.J. & Zhao, Y. & Wang, R.Z., 2017. "Experimental investigation on solar powered desiccant coated heat exchanger humidification air conditioning system in winter," Energy, Elsevier, vol. 137(C), pages 468-478.
    4. Venegas, Tomas & Qu, Ming & Nawaz, Kashif & Wang, Lingshi, 2021. "Critical review and future prospects for desiccant coated heat exchangers: Materials, design, and manufacturing," Renewable and Sustainable Energy Reviews, Elsevier, vol. 151(C).
    5. Feng, Y.H. & Dai, Y.J. & Wang, R.Z. & Ge, T.S., 2022. "Insights into desiccant-based internally-cooled dehumidification using porous sorbents: From a modeling viewpoint," Applied Energy, Elsevier, vol. 311(C).
    6. Kai-Shing Yang & Jian-Sin Wang & Shih-Kuo Wu & Chih-Yung Tseng & Jin-Cherng Shyu, 2017. "Performance Evaluation of a Desiccant Dehumidifier with a Heat Recovery Unit," Energies, MDPI, vol. 10(12), pages 1-12, December.
    7. Chen, Liu & Tan, Yikun, 2020. "The performance of a desiccant wheel air conditioning system with high-temperature chilled water from natural cold source," Renewable Energy, Elsevier, vol. 146(C), pages 2142-2157.
    8. Saputra, Dendi Adi & Osaka, Yugo & Tsujiguchi, Takuya & Haruki, Masashi & Kumita, Mikio & Kodama, Akio, 2020. "Experimental investigation of desiccant wheel dehumidification control method for changes in regeneration heat input," Energy, Elsevier, vol. 205(C).
    9. Yang, Yifan & Cui, Gary & Lan, Christopher Q., 2019. "Developments in evaporative cooling and enhanced evaporative cooling - A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 113(C), pages 1-1.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Shamim, Jubair A. & Hsu, Wei-Lun & Paul, Soumyadeep & Yu, Lili & Daiguji, Hirofumi, 2021. "A review of solid desiccant dehumidifiers: Current status and near-term development goals in the context of net zero energy buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 137(C).
    2. Sultan, Muhammad & El-Sharkawy, Ibrahim I. & Miyazaki, Takahiko & Saha, Bidyut Baran & Koyama, Shigeru, 2015. "An overview of solid desiccant dehumidification and air conditioning systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 46(C), pages 16-29.
    3. Kojok, Farah & Fardoun, Farouk & Younes, Rafic & Outbib, Rachid, 2016. "Hybrid cooling systems: A review and an optimized selection scheme," Renewable and Sustainable Energy Reviews, Elsevier, vol. 65(C), pages 57-80.
    4. Jani, D.B. & Mishra, Manish & Sahoo, P.K., 2016. "Solid desiccant air conditioning – A state of the art review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 60(C), pages 1451-1469.
    5. Enteria, Napoleon & Mizutani, Kunio, 2011. "The role of the thermally activated desiccant cooling technologies in the issue of energy and environment," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(4), pages 2095-2122, May.
    6. Muhammad Aleem & Ghulam Hussain & Muhammad Sultan & Takahiko Miyazaki & Muhammad H. Mahmood & Muhammad I. Sabir & Abdul Nasir & Faizan Shabir & Zahid M. Khan, 2020. "Experimental Investigation of Desiccant Dehumidification Cooling System for Climatic Conditions of Multan (Pakistan)," Energies, MDPI, vol. 13(21), pages 1-23, October.
    7. Guo, Jinyi & Lin, Simao & Bilbao, Jose I. & White, Stephen D. & Sproul, Alistair B., 2017. "A review of photovoltaic thermal (PV/T) heat utilisation with low temperature desiccant cooling and dehumidification," Renewable and Sustainable Energy Reviews, Elsevier, vol. 67(C), pages 1-14.
    8. Ruivo, Celestino R. & Goldsworthy, Mark & Intini, Manuel, 2014. "Interpolation methods to predict the influence of inlet airflow states on desiccant wheel performance at low regeneration temperature," Energy, Elsevier, vol. 68(C), pages 765-772.
    9. Baniyounes, Ali M. & Ghadi, Yazeed Yasin & Rasul, M.G. & Khan, M.M.K., 2013. "An overview of solar assisted air conditioning in Queensland's subtropical regions, Australia," Renewable and Sustainable Energy Reviews, Elsevier, vol. 26(C), pages 781-804.
    10. Prieto, Alejandro & Knaack, Ulrich & Auer, Thomas & Klein, Tillmann, 2019. "COOLFACADE: State-of-the-art review and evaluation of solar cooling technologies on their potential for façade integration," Renewable and Sustainable Energy Reviews, Elsevier, vol. 101(C), pages 395-414.
    11. Abou-Ziyan, H. & Abd El-Raheim, D. & Mahmoud, O. & Fatouh, M., 2017. "Performance characteristics of thin-multilayer activated alumina bed," Applied Energy, Elsevier, vol. 190(C), pages 29-42.
    12. Rafique, M. Mujahid & Gandhidasan, P. & Bahaidarah, Haitham M.S., 2016. "Liquid desiccant materials and dehumidifiers – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 179-195.
    13. Ruivo, Celestino R. & Angrisani, Giovanni & Minichiello, Francesco, 2015. "Influence of the rotation speed on the effectiveness parameters of a desiccant wheel: An assessment using experimental data and manufacturer software," Renewable Energy, Elsevier, vol. 76(C), pages 484-493.
    14. Zheng, X. & Ge, T.S. & Wang, R.Z., 2014. "Recent progress on desiccant materials for solid desiccant cooling systems," Energy, Elsevier, vol. 74(C), pages 280-294.
    15. Jani, D.B. & Mishra, Manish & Sahoo, P.K., 2017. "Application of artificial neural network for predicting performance of solid desiccant cooling systems – A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 80(C), pages 352-366.
    16. Zu, Kan & Qin, Menghao & Cui, Shuqing, 2020. "Progress and potential of metal-organic frameworks (MOFs) as novel desiccants for built environment control: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    17. Mahmood, Muhammad H. & Sultan, Muhammad & Miyazaki, Takahiko & Koyama, Shigeru & Maisotsenko, Valeriy S., 2016. "Overview of the Maisotsenko cycle – A way towards dew point evaporative cooling," Renewable and Sustainable Energy Reviews, Elsevier, vol. 66(C), pages 537-555.
    18. Sphaier, L.A. & Nóbrega, C.E.L., 2012. "Parametric analysis of components effectiveness on desiccant cooling system performance," Energy, Elsevier, vol. 38(1), pages 157-166.
    19. Kang, Hyungmook & Choi, Sun & Lee, Dae-Young, 2018. "Analytic solution to predict the outlet air states of a desiccant wheel with an arbitrary split ratio," Energy, Elsevier, vol. 153(C), pages 301-310.
    20. Zeyghami, Mehdi & Goswami, D. Yogi & Stefanakos, Elias, 2015. "A review of solar thermo-mechanical refrigeration and cooling methods," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1428-1445.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:54:y:2016:i:c:p:889-917. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.