IDEAS home Printed from https://ideas.repec.org/a/eee/rensus/v27y2013icp258-273.html
   My bibliography  Save this article

State-of-the-art of solar thermal power plants—A review

Author

Listed:
  • Siva Reddy, V.
  • Kaushik, S.C.
  • Ranjan, K.R.
  • Tyagi, S.K.

Abstract

The solar thermal power plant is one of the promising renewable energy options to substitute the increasing demand of conventional energy. The cost per kW of solar power is higher and the overall efficiency of the system is lower. In the present communication, a comprehensive literature review on the scenario of solar thermal power plants and its up-to-date technologies all over the world is presented. Results of the technical and economical feasibility studies by researchers are reported in brief for further reference. It is observed that the solar thermal power plants have come out of the experimental stage to commercial applications. Case studies of typical 50MW solar thermal power plants in the Indian climatic conditions at locations such as Jodhpur and Delhi is highlighted with the help of techno-economic model. Different solar concentrator technologies (parabolic trough, parabolic dish and central power tower) for solar thermal power plants are compared economically. It has been found that the parabolic dish concentrating solar Stirling engine power plant generate electricity at a lower unit cost than the other two solar technologies considering 30 years lifespan and 10% interest rate on investment.

Suggested Citation

  • Siva Reddy, V. & Kaushik, S.C. & Ranjan, K.R. & Tyagi, S.K., 2013. "State-of-the-art of solar thermal power plants—A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 27(C), pages 258-273.
    • Handle: RePEc:eee:rensus:v:27:y:2013:i:c:p:258-273
    DOI: 10.1016/j.rser.2013.06.037
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S1364032113004140
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.rser.2013.06.037?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yu, Qiang & Wang, Zhifeng & Xu, Ershu & Li, Xin & Guo, Minghuan, 2012. "Modeling and dynamic simulation of the collector and receiver system of 1MWe DAHAN solar thermal power tower plant," Renewable Energy, Elsevier, vol. 43(C), pages 18-29.
    2. Sripakagorn, Angkee & Srikam, Chana, 2011. "Design and performance of a moderate temperature difference Stirling engine," Renewable Energy, Elsevier, vol. 36(6), pages 1728-1733.
    3. Gupta, M.K. & Kaushik, S.C., 2010. "Exergy analysis and investigation for various feed water heaters of direct steam generation solar–thermal power plant," Renewable Energy, Elsevier, vol. 35(6), pages 1228-1235.
    4. Wu, Shuang-Ying & Xiao, Lan & Cao, Yiding & Li, You-Rong, 2010. "A parabolic dish/AMTEC solar thermal power system and its performance evaluation," Applied Energy, Elsevier, vol. 87(2), pages 452-462, February.
    5. Collado, Francisco J., 2009. "Preliminary design of surrounding heliostat fields," Renewable Energy, Elsevier, vol. 34(5), pages 1359-1363.
    6. Yao, Zhihao & Wang, Zhifeng & Lu, Zhenwu & Wei, Xiudong, 2009. "Modeling and simulation of the pioneer 1MW solar thermal central receiver system in China," Renewable Energy, Elsevier, vol. 34(11), pages 2437-2446.
    7. Poullikkas, Andreas & Hadjipaschalis, Ioannis & Kourtis, George, 2010. "The cost of integration of parabolic trough CSP plants in isolated Mediterranean power systems," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(5), pages 1469-1476, June.
    8. Singh, Narendra & Kaushik, S.C. & Misra, R.D., 2000. "Exergetic analysis of a solar thermal power system," Renewable Energy, Elsevier, vol. 19(1), pages 135-143.
    9. Yang, Minlin & Yang, Xiaoxi & Yang, Xiaoping & Ding, Jing, 2010. "Heat transfer enhancement and performance of the molten salt receiver of a solar power tower," Applied Energy, Elsevier, vol. 87(9), pages 2808-2811, September.
    10. Vallentin, Daniel & Viebahn, Peter, 2010. "Economic opportunities resulting from a global deployment of concentrated solar power (CSP) technologies--The example of German technology providers," Energy Policy, Elsevier, vol. 38(8), pages 4467-4478, August.
    11. Petrescu, Stoian & Petre, Camelia & Costea, Monica & Malancioiu, Octavian & Boriaru, Nicolae & Dobrovicescu, Alexandru & Feidt, Michel & Harman, Charles, 2010. "A methodology of computation, design and optimization of solar Stirling power plant using hydrogen/oxygen fuel cells," Energy, Elsevier, vol. 35(2), pages 729-739.
    12. Fernández-García, A. & Zarza, E. & Valenzuela, L. & Pérez, M., 2010. "Parabolic-trough solar collectors and their applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(7), pages 1695-1721, September.
    13. Poullikkas, Andreas, 2009. "Economic analysis of power generation from parabolic trough solar thermal plants for the Mediterranean region--A case study for the island of Cyprus," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(9), pages 2474-2484, December.
    14. Kongtragool, Bancha & Wongwises, Somchai, 2003. "A review of solar-powered Stirling engines and low temperature differential Stirling engines," Renewable and Sustainable Energy Reviews, Elsevier, vol. 7(2), pages 131-154, April.
    15. Purohit, Ishan & Purohit, Pallav, 2010. "Techno-economic evaluation of concentrating solar power generation in India," Energy Policy, Elsevier, vol. 38(6), pages 3015-3029, June.
    16. Xu, Ershu & Yu, Qiang & Wang, Zhifeng & Yang, Chenyao, 2011. "Modeling and simulation of 1 MW DAHAN solar thermal power tower plant," Renewable Energy, Elsevier, vol. 36(2), pages 848-857.
    17. Yaqi, Li & Yaling, He & Weiwei, Wang, 2011. "Optimization of solar-powered Stirling heat engine with finite-time thermodynamics," Renewable Energy, Elsevier, vol. 36(1), pages 421-427.
    18. Spelling, James & Favrat, Daniel & Martin, Andrew & Augsburger, Germain, 2012. "Thermoeconomic optimization of a combined-cycle solar tower power plant," Energy, Elsevier, vol. 41(1), pages 113-120.
    19. Horn, Mechthild & Führing, Heiner & Rheinländer, Jürgen, 2004. "Economic analysis of integrated solar combined cycle power plants," Energy, Elsevier, vol. 29(5), pages 935-945.
    20. Hosseini, R. & Soltani, M. & Valizadeh, G., 2005. "Technical and economic assessment of the integrated solar combined cycle power plants in Iran," Renewable Energy, Elsevier, vol. 30(10), pages 1541-1555.
    21. Sharaf, M.A. & Nafey, A.S. & García-Rodríguez, Lourdes, 2011. "Thermo-economic analysis of solar thermal power cycles assisted MED-VC (multi effect distillation-vapor compression) desalination processes," Energy, Elsevier, vol. 36(5), pages 2753-2764.
    22. Naeeni, N. & Yaghoubi, M., 2007. "Analysis of wind flow around a parabolic collector (2) heat transfer from receiver tube," Renewable Energy, Elsevier, vol. 32(8), pages 1259-1272.
    23. Bakos, G. C. & Ioannidis, I. & Tsagas, N. F. & Seftelis, I., 2001. "Design, optimisation and conversion-efficiency determination of a line-focus parabolic-trough solar-collector (PTC)," Applied Energy, Elsevier, vol. 68(1), pages 43-50, January.
    24. Leonardi, Erminia & D’Aguanno, Bruno, 2011. "CRS4-2: A numerical code for the calculation of the solar power collected in a central receiver system," Energy, Elsevier, vol. 36(8), pages 4828-4837.
    25. Montes, M.J. & Rovira, A. & Muñoz, M. & Martínez-Val, J.M., 2011. "Performance analysis of an Integrated Solar Combined Cycle using Direct Steam Generation in parabolic trough collectors," Applied Energy, Elsevier, vol. 88(9), pages 3228-3238.
    26. Reddy, V. Siva & Kaushik, S.C. & Tyagi, S.K., 2012. "Exergetic analysis and performance evaluation of parabolic trough concentrating solar thermal power plant (PTCSTPP)," Energy, Elsevier, vol. 39(1), pages 258-273.
    27. Timoumi, Youssef & Tlili, Iskander & Ben Nasrallah, Sassi, 2008. "Performance optimization of Stirling engines," Renewable Energy, Elsevier, vol. 33(9), pages 2134-2144.
    28. Wu, Zhiyong & Gong, Bo & Wang, Zhifeng & Li, Zhengnong & Zang, Chuncheng, 2010. "An experimental and numerical study of the gap effect on wind load on heliostat," Renewable Energy, Elsevier, vol. 35(4), pages 797-806.
    29. Kerkeni, C & BenJemaa, F & Kooli, S & Farhat, A & Maalej, M, 2002. "Performance evaluation of a thermodynamic solar power plant: fifteen years of operation history," Renewable Energy, Elsevier, vol. 25(3), pages 473-487.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Gupta, M.K. & Kaushik, S.C. & Ranjan, K.R. & Panwar, N.L. & Reddy, V. Siva & Tyagi, S.K., 2015. "Thermodynamic performance evaluation of solar and other thermal power generation systems: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 50(C), pages 567-582.
    2. Okoroigwe, Edmund & Madhlopa, Amos, 2016. "An integrated combined cycle system driven by a solar tower: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 57(C), pages 337-350.
    3. Hernández-Moro, J. & Martínez-Duart, J.M., 2013. "Analytical model for solar PV and CSP electricity costs: Present LCOE values and their future evolution," Renewable and Sustainable Energy Reviews, Elsevier, vol. 20(C), pages 119-132.
    4. Behar, Omar & Khellaf, Abdallah & Mohammedi, Kamal, 2013. "A review of studies on central receiver solar thermal power plants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 23(C), pages 12-39.
    5. Jamel, M.S. & Abd Rahman, A. & Shamsuddin, A.H., 2013. "Advances in the integration of solar thermal energy with conventional and non-conventional power plants," Renewable and Sustainable Energy Reviews, Elsevier, vol. 20(C), pages 71-81.
    6. Malagueta, Diego & Szklo, Alexandre & Borba, Bruno Soares Moreira Cesar & Soria, Rafael & Aragão, Raymundo & Schaeffer, Roberto & Dutra, Ricardo, 2013. "Assessing incentive policies for integrating centralized solar power generation in the Brazilian electric power system," Energy Policy, Elsevier, vol. 59(C), pages 198-212.
    7. Collado, Francisco J. & Guallar, Jesús, 2013. "A review of optimized design layouts for solar power tower plants with campo code," Renewable and Sustainable Energy Reviews, Elsevier, vol. 20(C), pages 142-154.
    8. Patel, Vivek & Savsani, Vimal, 2016. "Multi-objective optimization of a Stirling heat engine using TS-TLBO (tutorial training and self learning inspired teaching-learning based optimization) algorithm," Energy, Elsevier, vol. 95(C), pages 528-541.
    9. Malagueta, Diego & Szklo, Alexandre & Soria, Rafael & Dutra, Ricardo & Schaeffer, Roberto & Moreira Cesar Borba, Bruno Soares, 2014. "Potential and impacts of Concentrated Solar Power (CSP) integration in the Brazilian electric power system," Renewable Energy, Elsevier, vol. 68(C), pages 223-235.
    10. Ahmadi, Mohammad H. & Hosseinzade, Hadi & Sayyaadi, Hoseyn & Mohammadi, Amir H. & Kimiaghalam, Farshad, 2013. "Application of the multi-objective optimization method for designing a powered Stirling heat engine: Design with maximized power, thermal efficiency and minimized pressure loss," Renewable Energy, Elsevier, vol. 60(C), pages 313-322.
    11. Giglio, Andrea & Lanzini, Andrea & Leone, Pierluigi & Rodríguez García, Margarita M. & Zarza Moya, Eduardo, 2017. "Direct steam generation in parabolic-trough collectors: A review about the technology and a thermo-economic analysis of a hybrid system," Renewable and Sustainable Energy Reviews, Elsevier, vol. 74(C), pages 453-473.
    12. Mostafavi Tehrani, S. Saeed & Taylor, Robert A., 2016. "Off-design simulation and performance of molten salt cavity receivers in solar tower plants under realistic operational modes and control strategies," Applied Energy, Elsevier, vol. 179(C), pages 698-715.
    13. Wang, Ruilin & Qu, Wanjun & Hong, Hui & Sun, Jie & Jin, Hongguang, 2018. "Experimental performance of 300 kWth prototype of parabolic trough collector with rotatable axis and irreversibility analysis," Energy, Elsevier, vol. 161(C), pages 595-609.
    14. Bernardos, Eva & López, Ignacio & Rodríguez, Javier & Abánades, Alberto, 2013. "Assessing the potential of hybrid fossil–solar thermal plants for energy policy making: Brayton cycles," Energy Policy, Elsevier, vol. 62(C), pages 99-106.
    15. Cheng, Chin-Hsiang & Yang, Hang-Suin & Keong, Lam, 2013. "Theoretical and experimental study of a 300-W beta-type Stirling engine," Energy, Elsevier, vol. 59(C), pages 590-599.
    16. Ajbar, Wassila & Parrales, A. & Huicochea, A. & Hernández, J.A., 2022. "Different ways to improve parabolic trough solar collectors’ performance over the last four decades and their applications: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 156(C).
    17. Saghafifar, Mohammad & Gadalla, Mohamed, 2016. "Thermo-economic analysis of air bottoming cycle hybridization using heliostat field collector: A comparative analysis," Energy, Elsevier, vol. 112(C), pages 698-714.
    18. Cheng, Chin-Hsiang & Yang, Hang-Suin, 2011. "Analytical model for predicting the effect of operating speed on shaft power output of Stirling engines," Energy, Elsevier, vol. 36(10), pages 5899-5908.
    19. Ranjan, K.R. & Kaushik, S.C., 2014. "Thermodynamic and economic feasibility of solar ponds for various thermal applications: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 32(C), pages 123-139.
    20. El Ghazzani, Badreddine & Martinez Plaza, Diego & Ait El Cadi, Radia & Ihlal, Ahmed & Abnay, Brahim & Bouabid, Khalid, 2017. "Thermal plant based on parabolic trough collectors for industrial process heat generation in Morocco," Renewable Energy, Elsevier, vol. 113(C), pages 1261-1275.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:rensus:v:27:y:2013:i:c:p:258-273. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/wps/find/journaldescription.cws_home/600126/description#description .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.