IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v32y2007i10p1661-1675.html
   My bibliography  Save this article

Solar drying in sludge management in Turkey

Author

Listed:
  • Kamil Salihoglu, Nezih
  • Pinarli, Vedat
  • Salihoglu, Guray

Abstract

Two main wastewater treatment plants in Bursa city in Turkey will start to operate and produce at least 27,000 tons of dry solids per year by the end of 2006. The purpose of this study was to investigate an economical solution to the sludge management problem that Bursa city would encounter. The general trend in Turkey is mechanical dewatering to obtain a dry solid (DS) content of 20%, and liming the mechanically dewatered sludge to reach the legal landfilling requirement, 35% DS content. This study recommends limited liming & solar drying as an alternative to only-liming the mechanically dewatered sludge. Open and covered solar sludge drying plants were constructed in pilot scale for experimental purposes. Dry solids and climatic conditions were constantly measured. Faecal coliform reduction was also monitored. The specially designed covered solar drying plant proved to be more efficient than the open plant in terms of drying and faecal coliform reduction. It was found that, if the limited liming & solar drying method was applied after mechanical dewatering instead of only-liming method, the total amount of the sludge to be disposed would be reduced by approximately 40%. This would lead to a reduction in the transportation, handling, and landfilling costs. The covered drying system would amortize itself in 4 years.

Suggested Citation

  • Kamil Salihoglu, Nezih & Pinarli, Vedat & Salihoglu, Guray, 2007. "Solar drying in sludge management in Turkey," Renewable Energy, Elsevier, vol. 32(10), pages 1661-1675.
  • Handle: RePEc:eee:renene:v:32:y:2007:i:10:p:1661-1675
    DOI: 10.1016/j.renene.2006.08.001
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S096014810600228X
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2006.08.001?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Haralambopoulos, D.A & Biskos, G & Halvadakis, C & Lekkas, T.D, 2002. "Dewatering of wastewater sludge through a solar still," Renewable Energy, Elsevier, vol. 26(2), pages 247-256.
    2. Augustus Leon, M. & Kumar, S. & Bhattacharya, S. C., 2002. "A comprehensive procedure for performance evaluation of solar food dryers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 6(4), pages 367-393, August.
    3. Luboschik, Ulrich, 1999. "Solar sludge drying — Based on the IST process," Renewable Energy, Elsevier, vol. 16(1), pages 785-788.
    4. Kürklü, Ahmet & Bilgin, Sefai & Özkan, Burhan, 2003. "A study on the solar energy storing rock-bed to heat a polyethylene tunnel type greenhouse," Renewable Energy, Elsevier, vol. 28(5), pages 683-697.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Seckin, Candeniz & Bayulken, Ahmet R., 2013. "Extended Exergy Accounting (EEA) analysis of municipal wastewater treatment – Determination of environmental remediation cost for municipal wastewater," Applied Energy, Elsevier, vol. 110(C), pages 55-64.
    2. Pirasteh, G. & Saidur, R. & Rahman, S.M.A. & Rahim, N.A., 2014. "A review on development of solar drying applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 31(C), pages 133-148.
    3. Wang, Panli & Mohammed, Danish & Zhou, Pin & Lou, Ziyang & Qian, Pansheng & Zhou, Quanfa, 2019. "Roof solar drying processes for sewage sludge within sandwich-like chamber bed," Renewable Energy, Elsevier, vol. 136(C), pages 1071-1081.
    4. Bennamoun, Lyes & Arlabosse, Patricia & Léonard, Angélique, 2013. "Review on fundamental aspect of application of drying process to wastewater sludge," Renewable and Sustainable Energy Reviews, Elsevier, vol. 28(C), pages 29-43.
    5. VijayaVenkataRaman, S. & Iniyan, S. & Goic, Ranko, 2012. "A review of solar drying technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 2652-2670.
    6. Calise, F. & Di Fraia, S. & Macaluso, A. & Massarotti, N. & Vanoli, L., 2018. "A geothermal energy system for wastewater sludge drying and electricity production in a small island," Energy, Elsevier, vol. 163(C), pages 130-143.
    7. Alice Sorrenti & Santo Fabio Corsino & Francesco Traina & Gaspare Viviani & Michele Torregrossa, 2022. "Enhanced Sewage Sludge Drying with a Modified Solar Greenhouse," Clean Technol., MDPI, vol. 4(2), pages 1-13, May.
    8. Rehl, T. & Müller, J., 2011. "Life cycle assessment of biogas digestate processing technologies," Resources, Conservation & Recycling, Elsevier, vol. 56(1), pages 92-104.
    9. Thirugnanasambandam, Mirunalini & Iniyan, S. & Goic, Ranko, 2010. "A review of solar thermal technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 312-322, January.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Murthy, M.V. Ramana, 2009. "A review of new technologies, models and experimental investigations of solar driers," Renewable and Sustainable Energy Reviews, Elsevier, vol. 13(4), pages 835-844, May.
    2. EL-Mesery, Hany S. & EL-Seesy, Ahmed I. & Hu, Zicheng & Li, Yang, 2022. "Recent developments in solar drying technology of food and agricultural products: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 157(C).
    3. Kurpaska, S. & Latala, H., 2010. "Energy analysis of heat surplus storage systems in plastic tunnels," Renewable Energy, Elsevier, vol. 35(12), pages 2656-2665.
    4. Kareem, M.W. & Habib, Khairul & Ruslan, M.H. & Saha, Bidyut Baran, 2017. "Thermal performance study of a multi-pass solar air heating collector system for drying of Roselle (Hibiscus sabdariffa)," Renewable Energy, Elsevier, vol. 113(C), pages 281-292.
    5. Fudholi, Ahmad & Sopian, Kamaruzzaman & Gabbasa, Mohamed & Bakhtyar, B. & Yahya, M. & Ruslan, Mohd Hafidz & Mat, Sohif, 2015. "Techno-economic of solar drying systems with water based solar collectors in Malaysia: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 809-820.
    6. Boroze, Tchamye & Desmorieux, Hélène & Méot, Jean-Michel & Marouzé, Claude & Azouma, Yaovi & Napo, Kossi, 2014. "Inventory and comparative characteristics of dryers used in the sub-Saharan zone: Criteria influencing dryer choice," Renewable and Sustainable Energy Reviews, Elsevier, vol. 40(C), pages 1240-1259.
    7. Fadhel, M.I. & Sopian, K. & Daud, W.R.W. & Alghoul, M.A., 2011. "Review on advanced of solar assisted chemical heat pump dryer for agriculture produce," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(2), pages 1152-1168, February.
    8. Bhutto, Abdul Waheed & Bazmi, Aqeel Ahmed & Zahedi, Gholamreza, 2012. "Greener energy: Issues and challenges for Pakistan—Solar energy prospective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(5), pages 2762-2780.
    9. Ekka, Jasinta Poonam & Bala, Krishnendu & Muthukumar, P. & Kanaujiya, Dipak Kumar, 2020. "Performance analysis of a forced convection mixed mode horizontal solar cabinet dryer for drying of black ginger (Kaempferia parviflora) using two successive air mass flow rates," Renewable Energy, Elsevier, vol. 152(C), pages 55-66.
    10. Ortiz-Rodríguez, N.M. & Marín-Camacho, J.F. & González, A. Llamas- & García-Valladares, O., 2021. "Drying kinetics of natural rubber sheets under two solar thermal drying systems," Renewable Energy, Elsevier, vol. 165(P1), pages 438-454.
    11. Sabareesh, V. & Milan, K. John & Muraleedharan, C. & Rohinikumar, B., 2021. "Improved solar drying performance by ultrasonic desiccant dehumidification in indirect forced convection solar drying of ginger with phase change material," Renewable Energy, Elsevier, vol. 169(C), pages 1280-1293.
    12. Cresencio P. Genobiagon Jr & Feliciano B. Alagao, 2019. "Performance Of Low-Cost Dual Circuit Solar Assisted Cabinet Dryer For Green Banana," Journal of Mechanical Engineering Research & Developments (JMERD), Zibeline International Publishing, vol. 42(1), pages 42-45, January.
    13. Forson, F.K. & Nazha, M.A.A. & Akuffo, F.O. & Rajakaruna, H., 2007. "Design of mixed-mode natural convection solar crop dryers: Application of principles and rules of thumb," Renewable Energy, Elsevier, vol. 32(14), pages 2306-2319.
    14. El Hage, Hicham & Herez, Amal & Ramadan, Mohamad & Bazzi, Hassan & Khaled, Mahmoud, 2018. "An investigation on solar drying: A review with economic and environmental assessment," Energy, Elsevier, vol. 157(C), pages 815-829.
    15. Sekyere, C.K.K. & Forson, F.K. & Adam, F.W., 2016. "Experimental investigation of the drying characteristics of a mixed mode natural convection solar crop dryer with back up heater," Renewable Energy, Elsevier, vol. 92(C), pages 532-542.
    16. Misha, S. & Mat, S. & Ruslan, M.H. & Sopian, K., 2012. "Review of solid/liquid desiccant in the drying applications and its regeneration methods," Renewable and Sustainable Energy Reviews, Elsevier, vol. 16(7), pages 4686-4707.
    17. Shanmugam, V. & Natarajan, E., 2006. "Experimental investigation of forced convection and desiccant integrated solar dryer," Renewable Energy, Elsevier, vol. 31(8), pages 1239-1251.
    18. Canakci, Murad & Yasemin Emekli, N. & Bilgin, Sefai & Caglayan, Nuri, 2013. "Heating requirement and its costs in greenhouse structures: A case study for Mediterranean region of Turkey," Renewable and Sustainable Energy Reviews, Elsevier, vol. 24(C), pages 483-490.
    19. Ugwu, S.N. & Ugwuishiwu, B.O. & Ekechukwu, O.V. & Njoku, H. & Ani, A.O., 2015. "Design, construction, and evaluation of a mixed mode solar kiln with black-painted pebble bed for timber seasoning in a tropical setting," Renewable and Sustainable Energy Reviews, Elsevier, vol. 41(C), pages 1404-1412.
    20. M. Mofijur & Teuku Meurah Indra Mahlia & Arridina Susan Silitonga & Hwai Chyuan Ong & Mahyar Silakhori & Muhammad Heikal Hasan & Nandy Putra & S.M. Ashrafur Rahman, 2019. "Phase Change Materials (PCM) for Solar Energy Usages and Storage: An Overview," Energies, MDPI, vol. 12(16), pages 1-20, August.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:32:y:2007:i:10:p:1661-1675. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.