IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v194y2022icp195-210.html
   My bibliography  Save this article

Influence of external clamping pressure on nanoscopic mechanical deformation and catalyst utilization of quaternion PtC catalyst layers for PEMFCs

Author

Listed:
  • Akbar, Ali
  • Um, Sukkee

Abstract

The external clamping pressure (CP) has a significant influence on the morphology, transport characteristics, and performance of catalyst layers (CLs) of the proton exchange membrane fuel cells (PEMFCs). Therefore, comprehensive understanding the nanoscale mechanical deformation and its impact on the utilization of precious platinum catalysts are extremely important for designing effective CLs. In this study, the effect of external CP on the morphology, interconnectivity and electrochemical catalyst utilization of CLs is explored. The quaternion carbon-supported platinum (PtC) CL agglomerate nanostructures are reconstructed for the predetermined fuel cell catalyst compositions containing platinum (Pts) supported on carbon black, ionomers, and pores. The compression model is developed using an effective medium theory based on a unit cell and implemented on the reconstructed CL domain with a 98% confidence level. The results of CL compression model are validated based on the experimental data from previous studies. The effect of compression on the thickness, porosity, local pore size distribution, electron-conducting PtC, and proton-conducting electrolyte are investigated in detail because these parameters are critical for the transport properties and performance of the CLs. Moreover, the numerical experiments are repeated for a range of CL compositions by varying the ionomer-to-carbon weight ratio (I/C) from 0.5 to 1.2 for different CPs (0, 1, and 2 MPa). The numerical results show that the interconnectivities of PtC, ionomer, and pore phases are strongly dependent on the applied CPs. Finally, the electrochemical performance of the CLs is compared for the maximum electrochemical catalyst utilization factor (ECUF) to enhance overall fuel cell performance. Insights gathered from this modeling study can be used for further investigation of mass transfer in compressed PtC CLs for better understanding fuel cell performance.

Suggested Citation

  • Akbar, Ali & Um, Sukkee, 2022. "Influence of external clamping pressure on nanoscopic mechanical deformation and catalyst utilization of quaternion PtC catalyst layers for PEMFCs," Renewable Energy, Elsevier, vol. 194(C), pages 195-210.
    • Handle: RePEc:eee:renene:v:194:y:2022:i:c:p:195-210
    DOI: 10.1016/j.renene.2022.05.112
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148122007637
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2022.05.112?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Mu, Yu-Tong & Weber, Adam Z. & Gu, Zhao-Lin & Tao, Wen-Quan, 2019. "Mesoscopic modeling of transport resistances in a polymer-electrolyte fuel-cell catalyst layer: Analysis of hydrogen limiting currents," Applied Energy, Elsevier, vol. 255(C).
    2. Akbar, Ali & Liu, Jiawen & Chung, Sung-Jae & Um, Sukkee, 2021. "Statistical characterization of non-linear microscopic mechanical deformation through randomly oriented fibrous porous transport layers for advanced electrochemical energy systems," Renewable Energy, Elsevier, vol. 178(C), pages 1106-1118.
    3. Bouziane, Khadidja & Khetabi, El Mahdi & Lachat, Rémy & Zamel, Nada & Meyer, Yann & Candusso, Denis, 2020. "Impact of cyclic mechanical compression on the electrical contact resistance between the gas diffusion layer and the bipolar plate of a polymer electrolyte membrane fuel cell," Renewable Energy, Elsevier, vol. 153(C), pages 349-361.
    4. Huang, Xudong & Yang, Dong & Kang, Zhiqin, 2021. "Impact of pore distribution characteristics on percolation threshold based on site percolation theory," Physica A: Statistical Mechanics and its Applications, Elsevier, vol. 570(C).
    5. Aldakheel, F. & Ismail, M.S. & Hughes, K.J. & Ingham, D.B. & Ma, L. & Pourkashanian, M. & Cumming, D. & Smith, R., 2020. "Gas permeability, wettability and morphology of gas diffusion layers before and after performing a realistic ex-situ compression test," Renewable Energy, Elsevier, vol. 151(C), pages 1082-1091.
    6. Liu, Jiawen & Shin, Seungho & Um, Sukkee, 2019. "Comprehensive statistical analysis of heterogeneous transport characteristics in multifunctional porous gas diffusion layers using lattice Boltzmann method for fuel cell applications," Renewable Energy, Elsevier, vol. 139(C), pages 279-291.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Akbar, Ali & Liu, Jiawen & Chung, Sung-Jae & Um, Sukkee, 2021. "Statistical characterization of non-linear microscopic mechanical deformation through randomly oriented fibrous porous transport layers for advanced electrochemical energy systems," Renewable Energy, Elsevier, vol. 178(C), pages 1106-1118.
    2. Saeidfar, Asal & Yesilyurt, Serhat, 2023. "Numerical investigation of the effects of catalyst layer composition and channel to rib width ratios for low platinum loaded PEMFCs," Applied Energy, Elsevier, vol. 339(C).
    3. Zhang, Ruiyuan & Min, Ting & Chen, Li & Li, Hailong & Yan, Jinyue & Tao, Wen-Quan, 2022. "Pore-scale study of effects of relative humidity on reactive transport processes in catalyst layers in PEMFC," Applied Energy, Elsevier, vol. 323(C).
    4. Yanqin Chen & Yuchao Ke & Yingsong Xia & Chongdu Cho, 2021. "Investigation on Mechanical Properties of a Carbon Paper Gas Diffusion Layer through a 3-D Nonlinear and Orthotropic Constitutive Model," Energies, MDPI, vol. 14(19), pages 1-14, October.
    5. Pan, Mingzhang & Pan, Chengjie & Li, Chao & Zhao, Jian, 2021. "A review of membranes in proton exchange membrane fuel cells: Transport phenomena, performance and durability," Renewable and Sustainable Energy Reviews, Elsevier, vol. 141(C).
    6. Ercelik, Mustafa & Ismail, Mohammed S. & Ingham, Derek B. & Hughes, Kevin J. & Ma, Lin & Pourkashanian, Mohamed, 2023. "Efficient X-ray CT-based numerical computations of structural and mass transport properties of nickel foam-based GDLs for PEFCs," Energy, Elsevier, vol. 262(PB).
    7. Ren, Peng & Pei, Pucheng & Chen, Dongfang & Zhang, Lu & Li, Yuehua & Song, Xin & Wang, Mingkai & Wang, He, 2022. "Corrosion of metallic bipolar plates accelerated by operating conditions in a simulated PEM fuel cell cathode environment," Renewable Energy, Elsevier, vol. 194(C), pages 1277-1287.
    8. Abdul Ghani Olabi & Tabbi Wilberforce & Abdulrahman Alanazi & Parag Vichare & Enas Taha Sayed & Hussein M. Maghrabie & Khaled Elsaid & Mohammad Ali Abdelkareem, 2022. "Novel Trends in Proton Exchange Membrane Fuel Cells," Energies, MDPI, vol. 15(14), pages 1-35, July.
    9. Narvin D. Neehall & Mohammed S. Ismail & Kevin J. Hughes & Mohamed Pourkashanian, 2023. "Effect of Microporous Layer Ink Homogenisation on the Through-Plane Gas Permeability of PEFC Porous Media," Energies, MDPI, vol. 16(16), pages 1-15, August.
    10. Ye, Lingfeng & Qiu, Diankai & Peng, Linfa & Lai, Xinmin, 2022. "Microstructures and electrical conductivity properties of compressed gas diffusion layers using X-ray tomography," Applied Energy, Elsevier, vol. 326(C).
    11. Isaac C. Okereke & Mohammed S. Ismail & Derek B. Ingham & Kevin Hughes & Lin Ma & Mohamed Pourkashanian, 2023. "Single- and Double-Sided Coated Gas Diffusion Layers Used in Polymer Electrolyte Fuel Cells: A Numerical Study," Energies, MDPI, vol. 16(11), pages 1-16, May.
    12. Donglei Yang & Nitul Kakati & Mrittunjoy Sarker & Felipe Mojica & Po-Ya Abel Chuang, 2024. "The Formation–Structure–Functionality Relationship of Catalyst Layers in Proton Exchange Membrane Fuel Cells," Energies, MDPI, vol. 17(9), pages 1-14, April.
    13. Li, Bing & Wan, Kechuang & Xie, Meng & Chu, Tiankuo & Wang, Xiaolei & Li, Xiang & Yang, Daijun & Ming, Pingwen & Zhang, Cunman, 2022. "Durability degradation mechanism and consistency analysis for proton exchange membrane fuel cell stack," Applied Energy, Elsevier, vol. 314(C).
    14. Chen, Chaogang & Gao, Yuan, 2024. "Using multi-threshold non-local means joint distribution method to analysis the spatial distribution patterns of binder and fibers in gas diffusion layers of fuel cells," Applied Energy, Elsevier, vol. 358(C).
    15. Qiu, Diankai & Peng, Linfa & Yi, Peiyun & Lehnert, Werner & Lai, Xinmin, 2021. "Review on proton exchange membrane fuel cell stack assembly: Quality evaluation, assembly method, contact behavior and process design," Renewable and Sustainable Energy Reviews, Elsevier, vol. 152(C).
    16. Hou, Junbo & Yang, Min & Zhang, Junliang, 2020. "Active and passive fuel recirculation for solid oxide and proton exchange membrane fuel cells," Renewable Energy, Elsevier, vol. 155(C), pages 1355-1371.
    17. Abelly, Elieneza Nicodemus & Yang, Feng & Ngata, Mbega Ramadhani & Mwakipunda, Grant Charles & Shanghvi, Eric Richard, 2024. "A field study of pore-network systems on the tight shale gas formation through adsorption-desorption technique and mercury intrusion capillary porosimeter: Percolation theory and simulations," Energy, Elsevier, vol. 302(C).
    18. Rolando Pedicini & Marcello Romagnoli & Paolo E. Santangelo, 2023. "A Critical Review of Polymer Electrolyte Membrane Fuel Cell Systems for Automotive Applications: Components, Materials, and Comparative Assessment," Energies, MDPI, vol. 16(7), pages 1-28, March.
    19. Ying Da Wang & Quentin Meyer & Kunning Tang & James E. McClure & Robin T. White & Stephen T. Kelly & Matthew M. Crawford & Francesco Iacoviello & Dan J. L. Brett & Paul R. Shearing & Peyman Mostaghimi, 2023. "Large-scale physically accurate modelling of real proton exchange membrane fuel cell with deep learning," Nature Communications, Nature, vol. 14(1), pages 1-15, December.
    20. Yang, Yange & Li, Xiang & Chu, Tiankuo & Li, Bing & Zhang, Cunman, 2022. "Property evolution of gas diffusion layer and performance shrink of fuel cell during operation," Renewable Energy, Elsevier, vol. 194(C), pages 596-603.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:194:y:2022:i:c:p:195-210. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.