IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v162y2020icp466-477.html
   My bibliography  Save this article

Effect of side walls shape on charging and discharging performance of thermal energy storages based on granular phase change materials

Author

Listed:
  • Lutsenko, Nickolay A.
  • Fetsov, Sergey S.

Abstract

In this work, thermal energy storages based on granular phase change material with gaseous heat transfer fluid are studied to determine their optimal shape. The shape of the energy storage unit affects the gas dynamics in the object, and this affects the processes of heat transfer, heat accumulation and heat recovery. A novel numerical model is developed and used for investigating the gas-dynamic and thermophysical processes in packed bed thermal energy storages. Using numerical experiments, the effect of narrowing and expansion of side walls on charging and discharging processes of the energy storages is studied for two types of boundary conditions: the known input mass flow rate of the gas and the known gas pressure at the open boundaries of the object. To determine the most optimal shape of the thermal energy storage, several efficiency criteria are used. It is shown that preference of the storage shape at both charging and discharging processes depends on the choice of efficiency criterion and specific conditions of the process such as boundary conditions, phase change temperature of granular material, and so on. Narrowing or expanding thermal energy storages have advantages in rare cases; the storages with straight walls are often most preferable.

Suggested Citation

  • Lutsenko, Nickolay A. & Fetsov, Sergey S., 2020. "Effect of side walls shape on charging and discharging performance of thermal energy storages based on granular phase change materials," Renewable Energy, Elsevier, vol. 162(C), pages 466-477.
    • Handle: RePEc:eee:renene:v:162:y:2020:i:c:p:466-477
    DOI: 10.1016/j.renene.2020.08.029
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148120312660
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2020.08.029?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Rady, Mohamed, 2009. "Thermal performance of packed bed thermal energy storage units using multiple granular phase change composites," Applied Energy, Elsevier, vol. 86(12), pages 2704-2720, December.
    2. Safdari, Mojtaba & Ahmadi, Rouhollah & Sadeghzadeh, Sadegh, 2020. "Numerical investigation on PCM encapsulation shape used in the passive-active battery thermal management," Energy, Elsevier, vol. 193(C).
    3. Peng, Hao & Li, Rui & Ling, Xiang & Dong, Huihua, 2015. "Modeling on heat storage performance of compressed air in a packed bed system," Applied Energy, Elsevier, vol. 160(C), pages 1-9.
    4. Peng, Hao & Yang, Yu & Li, Rui & Ling, Xiang, 2016. "Thermodynamic analysis of an improved adiabatic compressed air energy storage system," Applied Energy, Elsevier, vol. 183(C), pages 1361-1373.
    5. Beatrice Castellani & Andrea Presciutti & Mirko Filipponi & Andrea Nicolini & Federico Rossi, 2015. "Experimental Investigation on the Effect of Phase Change Materials on Compressed Air Expansion in CAES Plants," Sustainability, MDPI, vol. 7(8), pages 1-14, July.
    6. Mao, Qianjun & Zhang, Yamei, 2020. "Thermal energy storage performance of a three-PCM cascade tank in a high-temperature packed bed system," Renewable Energy, Elsevier, vol. 152(C), pages 110-119.
    7. Jacob, Rhys & Belusko, Martin & Liu, Ming & Saman, Wasim & Bruno, Frank, 2019. "Using renewables coupled with thermal energy storage to reduce natural gas consumption in higher temperature commercial/industrial applications," Renewable Energy, Elsevier, vol. 131(C), pages 1035-1046.
    8. Peng, Hao & Shan, Xuekun & Yang, Yu & Ling, Xiang, 2018. "A study on performance of a liquid air energy storage system with packed bed units," Applied Energy, Elsevier, vol. 211(C), pages 126-135.
    9. Afshan, Mahboob E. & Selvakumar, A.S & Velraj, R. & Rajaraman, R., 2020. "Effect of aspect ratio and dispersed PCM balls on the charging performance of a latent heat thermal storage unit for solar thermal applications," Renewable Energy, Elsevier, vol. 148(C), pages 876-888.
    10. Yang, Zheng & Chen, Haisheng & Wang, Liang & Sheng, Yong & Wang, Yifei, 2016. "Comparative study of the influences of different water tank shapes on thermal energy storage capacity and thermal stratification," Renewable Energy, Elsevier, vol. 85(C), pages 31-44.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Guo, Weimin & He, Zhaoyu & Zhang, Yuting & Zhang, Peng, 2022. "Thermal performance of the packed bed thermal energy storage system with encapsulated phase change material," Renewable Energy, Elsevier, vol. 196(C), pages 1345-1356.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Ayah Marwan Rabi & Jovana Radulovic & James M. Buick, 2023. "Comprehensive Review of Liquid Air Energy Storage (LAES) Technologies," Energies, MDPI, vol. 16(17), pages 1-19, August.
    2. Yu, Qinghua & Tchuenbou-Magaia, Fideline & Al-Duri, Bushra & Zhang, Zhibing & Ding, Yulong & Li, Yongliang, 2018. "Thermo-mechanical analysis of microcapsules containing phase change materials for cold storage," Applied Energy, Elsevier, vol. 211(C), pages 1190-1202.
    3. Chang, Chun & Wu, Zhiyong & Navarro, Helena & Li, Chuan & Leng, Guanghui & Li, Xiaoxia & Yang, Ming & Wang, Zhifeng & Ding, Yulong, 2017. "Comparative study of the transient natural convection in an underground water pit thermal storage," Applied Energy, Elsevier, vol. 208(C), pages 1162-1173.
    4. Li, Yantong & Huang, Gongsheng & Xu, Tao & Liu, Xiaoping & Wu, Huijun, 2018. "Optimal design of PCM thermal storage tank and its application for winter available open-air swimming pool," Applied Energy, Elsevier, vol. 209(C), pages 224-235.
    5. Chang, Chun & Sciacovelli, Adriano & Wu, Zhiyong & Li, Xin & Li, Yongliang & Zhao, Mingzhi & Deng, Jie & Wang, Zhifeng & Ding, Yulong, 2018. "Enhanced heat transfer in a parabolic trough solar receiver by inserting rods and using molten salt as heat transfer fluid," Applied Energy, Elsevier, vol. 220(C), pages 337-350.
    6. de Gracia, Alvaro & Cabeza, Luisa F., 2017. "Numerical simulation of a PCM packed bed system: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 69(C), pages 1055-1063.
    7. Peng, Xiaodong & She, Xiaohui & Li, Chuan & Luo, Yimo & Zhang, Tongtong & Li, Yongliang & Ding, Yulong, 2019. "Liquid air energy storage flexibly coupled with LNG regasification for improving air liquefaction," Applied Energy, Elsevier, vol. 250(C), pages 1190-1201.
    8. Ge, Gangqiang & Wang, Huanran & Li, Ruixiong & Sun, Hao & Zhang, Yufei, 2024. "Investigation and improvement of complex characteristics of packed bed thermal energy storage (PBTES) in adiabatic compressed air energy storage (A-CAES) systems," Energy, Elsevier, vol. 296(C).
    9. Guo, Weimin & He, Zhaoyu & Zhang, Yuting & Zhang, Peng, 2022. "Thermal performance of the packed bed thermal energy storage system with encapsulated phase change material," Renewable Energy, Elsevier, vol. 196(C), pages 1345-1356.
    10. Zhou, Ruiwen & Ling, Xiang & Peng, Hao & Yang, Lin, 2018. "Thermal characteristics of the combined flat plate heat receiver in solar power tower plant," Energy, Elsevier, vol. 165(PA), pages 275-289.
    11. Peng, Hao & Shan, Xuekun & Yang, Yu & Ling, Xiang, 2018. "A study on performance of a liquid air energy storage system with packed bed units," Applied Energy, Elsevier, vol. 211(C), pages 126-135.
    12. Ouyang, Tiancheng & Qin, Peijia & Xie, Shutao & Tan, Xianlin & Pan, Mingming, 2023. "Flexible dispatch strategy of purchasing-selling electricity for coal-fired power plant based on compressed air energy storage," Energy, Elsevier, vol. 267(C).
    13. Li, Songlin & Dong, Beibei & Wang, Jinghang & Li, Juan & Shen, Tongtong & Peng, Hao & Ling, Xiang, 2019. "Synthesis and characterization of mixed alkanes microcapsules with phase change temperature below ice point for cryogenic thermal energy storage," Energy, Elsevier, vol. 187(C).
    14. Peng, Xiaodong & She, Xiaohui & Cong, Lin & Zhang, Tongtong & Li, Chuan & Li, Yongliang & Wang, Li & Tong, Lige & Ding, Yulong, 2018. "Thermodynamic study on the effect of cold and heat recovery on performance of liquid air energy storage," Applied Energy, Elsevier, vol. 221(C), pages 86-99.
    15. He, Wei & Wang, Jihong & Wang, Yang & Ding, Yulong & Chen, Haisheng & Wu, Yuting & Garvey, Seamus, 2017. "Study of cycle-to-cycle dynamic characteristics of adiabatic Compressed Air Energy Storage using packed bed Thermal Energy Storage," Energy, Elsevier, vol. 141(C), pages 2120-2134.
    16. Zhao, Bing-chen & Cheng, Mao-song & Liu, Chang & Dai, Zhi-min, 2017. "Cyclic thermal characterization of a molten-salt packed-bed thermal energy storage for concentrating solar power," Applied Energy, Elsevier, vol. 195(C), pages 761-773.
    17. Qi, Meng & Park, Jinwoo & Lee, Inkyu & Moon, Il, 2022. "Liquid air as an emerging energy vector towards carbon neutrality: A multi-scale systems perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 159(C).
    18. Du, Kun & Calautit, John & Eames, Philip & Wu, Yupeng, 2021. "A state-of-the-art review of the application of phase change materials (PCM) in Mobilized-Thermal Energy Storage (M-TES) for recovering low-temperature industrial waste heat (IWH) for distributed heat," Renewable Energy, Elsevier, vol. 168(C), pages 1040-1057.
    19. Houssainy, Sammy & Janbozorgi, Mohammad & Ip, Peggy & Kavehpour, Pirouz, 2018. "Thermodynamic analysis of a high temperature hybrid compressed air energy storage (HTH-CAES) system," Renewable Energy, Elsevier, vol. 115(C), pages 1043-1054.
    20. Fan, Jinyang & Liu, Wei & Jiang, Deyi & Chen, Junchao & Ngaha Tiedeu, William & Chen, Jie & JJK, Deaman, 2018. "Thermodynamic and applicability analysis of a hybrid CAES system using abandoned coal mine in China," Energy, Elsevier, vol. 157(C), pages 31-44.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:162:y:2020:i:c:p:466-477. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.