IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v162y2020icp2220-2226.html
   My bibliography  Save this article

Electricity generation and storage in microbial fuel cells with porous polypyrrole-base composite modified carbon brush anodes

Author

Listed:
  • Wang, Yuyang
  • Zhu, Lin
  • An, Lijuan

Abstract

Microbial fuel cells (MFCs) equipped with three-dimensional (3D) electrodes are widely used in wastewater treatment. However, the power output and energy storage of MFCs with 3D anodes are still limited in application. Here, a biocompatible, capacitive, and adhesive polypyrrole, carboxymethyl cellulose, carbon nanotube/carbon brush (PPy-CMC-CNTs/CB) material was prepared, that was integrated into a composite to obtain a high-capacitance 3D anode. An SEM showed that the composite anode had a 3D-macroporous structure that had a large surface area, providing more places for the attachment and growth of microorganisms. The power density of the MFC with a PPy-CMC-CNTs/CB composite anode (2970 mW/m2) was 4.34 times greater than that of an MFC with a bare anode (683 mW/m2). In the tests with a charge for 15 min and discharge for 45 min, it was observed that the stored charge of the bioanode (333 mC/cm2) was 23.67 times higher than that of the bare anode (14.07 mC/cm2). High-throughput sequencing revealed that the modified composite anode had excellent biocompatibility and selective enrichment of electrogenic bacteria. This study provided a simple and environmentally-friendly modification to enable a PPy-CMC-CNTs/CB composite anode to promote energy storage and output performance of MFCs.

Suggested Citation

  • Wang, Yuyang & Zhu, Lin & An, Lijuan, 2020. "Electricity generation and storage in microbial fuel cells with porous polypyrrole-base composite modified carbon brush anodes," Renewable Energy, Elsevier, vol. 162(C), pages 2220-2226.
    • Handle: RePEc:eee:renene:v:162:y:2020:i:c:p:2220-2226
    DOI: 10.1016/j.renene.2020.10.032
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148120315986
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.renene.2020.10.032?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Liang, Peng & Zhang, Changyong & Jiang, Yong & Bian, Yanhong & Zhang, Helan & Sun, Xueliang & Yang, Xufei & Zhang, Xiaoyuan & Huang, Xia, 2017. "Performance enhancement of microbial fuel cell by applying transient-state regulation," Applied Energy, Elsevier, vol. 185(P1), pages 582-588.
    2. Qi, Lijuan & Wu, Jiansong & Chen, Ye & Wen, Qing & Xu, Haitao & Wang, Yuyang, 2020. "Shape-controllable binderless self-supporting hydrogel anode for microbial fuel cells," Renewable Energy, Elsevier, vol. 156(C), pages 1325-1335.
    3. Zinadini, S. & Zinatizadeh, A.A. & Rahimi, M. & Vatanpour, V. & Rahimi, Z., 2017. "High power generation and COD removal in a microbial fuel cell operated by a novel sulfonated PES/PES blend proton exchange membrane," Energy, Elsevier, vol. 125(C), pages 427-438.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Ullah, Zia & Zeshan,, 2024. "Effect of catholyte on performance of photosynthetic microbial fuel cell for wastewater treatment and energy recovery," Renewable Energy, Elsevier, vol. 221(C).
    2. Dawid Nosek & Piotr Jachimowicz & Agnieszka Cydzik-Kwiatkowska, 2020. "Anode Modification as an Alternative Approach to Improve Electricity Generation in Microbial Fuel Cells," Energies, MDPI, vol. 13(24), pages 1-22, December.
    3. Xu, Haitao & Du, Yanan & Chen, Ye & Wen, Qing & Lin, Cunguo & Zheng, Jiyong & Qiu, Zhenghui, 2022. "Electricity generation in simulated benthic microbial fuel cell with conductive polyaniline-polypyrole composite hydrogel anode," Renewable Energy, Elsevier, vol. 183(C), pages 242-250.
    4. Chouhan, Raghuraj Singh & Gandhi, Sonu & Verma, Suresh K. & Jerman, Ivan & Baker, Syed & Štrok, Marko, 2023. "Recent advancements in the development of Two-Dimensional nanostructured based anode materials for stable power density in microbial fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    5. Chen, Wenwen & Liu, Zhongliang & Li, Yanxia & Liao, Qiang & Zhu, Xun, 2021. "High electricity generation achieved by depositing rGO@MnO2 composite catalysts on three-dimensional stainless steel fiber felt for preparing the energy-efficient air cathode in microbial fuel cells," Energy, Elsevier, vol. 222(C).
    6. Tamilselvi, R. & Lekshmi, G.S. & Padmanathan, N. & Selvaraj, V. & Bazaka, O. & Levchenko, I. & Bazaka, K. & Mandhakini, M., 2022. "NiFe2O4 / rGO nanocomposites produced by soft bubble assembly for energy storage and environmental remediation," Renewable Energy, Elsevier, vol. 181(C), pages 1386-1401.
    7. Nauman Javed, Rana Muhammad & Al-Othman, Amani & Tawalbeh, Muhammad & Olabi, Abdul Ghani, 2022. "Recent developments in graphene and graphene oxide materials for polymer electrolyte membrane fuel cells applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Wang, Yuyang & Chen, Ye & Wen, Qing & Zheng, Hongtao & Xu, Haitao & Qi, Lijuan, 2019. "Electricity generation, energy storage, and microbial-community analysis in microbial fuel cells with multilayer capacitive anodes," Energy, Elsevier, vol. 189(C).
    2. Caizán-Juanarena, Leire & Sleutels, Tom & Borsje, Casper & ter Heijne, Annemiek, 2020. "Considerations for application of granular activated carbon as capacitive bioanode in bioelectrochemical systems," Renewable Energy, Elsevier, vol. 157(C), pages 782-792.
    3. Choudhury, Payel & Uday, Uma Shankar Prasad & Mahata, Nibedita & Nath Tiwari, Onkar & Narayan Ray, Rup & Kanti Bandyopadhyay, Tarun & Bhunia, Biswanath, 2017. "Performance improvement of microbial fuel cells for waste water treatment along with value addition: A review on past achievements and recent perspectives," Renewable and Sustainable Energy Reviews, Elsevier, vol. 79(C), pages 372-389.
    4. Liu, Panpan & Liang, Peng & Jiang, Yong & Hao, Wen & Miao, Bo & Wang, Donglin & Huang, Xia, 2018. "Stimulated electron transfer inside electroactive biofilm by magnetite for increased performance microbial fuel cell," Applied Energy, Elsevier, vol. 216(C), pages 382-388.
    5. Xin, Shuaishuai & Shen, Jianguo & Liu, Guocheng & Chen, Qinghua & Xiao, Zhou & Zhang, Guodong & Xin, Yanjun, 2020. "High electricity generation and COD removal from cattle wastewater in microbial fuel cells with 3D air cathode employed non-precious Cu2O/reduced graphene oxide as cathode catalyst," Energy, Elsevier, vol. 196(C).
    6. Xu, Haitao & Du, Yanan & Chen, Ye & Wen, Qing & Lin, Cunguo & Zheng, Jiyong & Qiu, Zhenghui, 2022. "Electricity generation in simulated benthic microbial fuel cell with conductive polyaniline-polypyrole composite hydrogel anode," Renewable Energy, Elsevier, vol. 183(C), pages 242-250.
    7. Christwardana, Marcelinus & Frattini, Domenico & Duarte, Kimberley D.Z. & Accardo, Grazia & Kwon, Yongchai, 2019. "Carbon felt molecular modification and biofilm augmentation via quorum sensing approach in yeast-based microbial fuel cells," Applied Energy, Elsevier, vol. 238(C), pages 239-248.
    8. Eisa, Tasnim & Park, Sung-Gwan & Mohamed, Hend Omar & Abdelkareem, Mohammad Ali & Lee, Jieun & Yang, Euntae & Castaño, Pedro & Chae, Kyu-Jung, 2021. "Outstanding performance of direct urea/hydrogen peroxide fuel cell based on precious metal-free catalyst electrodes," Energy, Elsevier, vol. 228(C).
    9. Christwardana, Marcelinus & Frattini, Domenico & Accardo, Grazia & Yoon, Sung Pil & Kwon, Yongchai, 2018. "Early-stage performance evaluation of flowing microbial fuel cells using chemically treated carbon felt and yeast biocatalyst," Applied Energy, Elsevier, vol. 222(C), pages 369-382.
    10. Ullah, Zia & Zeshan,, 2024. "Effect of catholyte on performance of photosynthetic microbial fuel cell for wastewater treatment and energy recovery," Renewable Energy, Elsevier, vol. 221(C).
    11. Shabani, Mehri & Younesi, Habibollah & Pontié, Maxime & Rahimpour, Ahmad & Rahimnejad, Mostafa & Guo, Hanxiao & Szymczyk, Anthony, 2021. "Enhancement of microbial fuel cell efficiency by incorporation of graphene oxide and functionalized graphene oxide in sulfonated polyethersulfone membrane," Renewable Energy, Elsevier, vol. 179(C), pages 788-801.
    12. Wang, Yuyang & Wen, Qing & Chen, Ye & Zheng, Hongtao & Wang, Shuang, 2020. "Enhanced performance of microbial fuel cell with polyaniline/sodium alginate/carbon brush hydrogel bioanode and removal of COD," Energy, Elsevier, vol. 202(C).
    13. Gao, Ningshengjie & Qu, Botong & Xing, Zhenyu & Ji, Xiulei & Zhang, Eugene & Liu, Hong, 2018. "Development of novel polyethylene air-cathode material for microbial fuel cells," Energy, Elsevier, vol. 155(C), pages 763-771.
    14. Mohamed, Hend Omar & Talas, Sawsan Abo & Sayed, Enas T. & Park, Sung-Gwan & Eisa, Tasnim & Abdelkareem, Mohammad Ali & Fadali, Olfat A. & Chae, Kyu-Jung & Castaño, Pedro, 2021. "Enhancing power generation in microbial fuel cell using tungsten carbide on reduced graphene oxide as an efficient anode catalyst material," Energy, Elsevier, vol. 229(C).
    15. Xu, Lei & Wang, Bodi & Liu, Xiuhua & Yu, Wenzheng & Zhao, Yaqian, 2018. "Maximizing the energy harvest from a microbial fuel cell embedded in a constructed wetland," Applied Energy, Elsevier, vol. 214(C), pages 83-91.
    16. Wang, Yuyang & Wen, Qing & Chen, Ye & Li, Wei, 2020. "Conductive polypyrrole-carboxymethyl cellulose-titanium nitride/carbon brush hydrogels as bioanodes for enhanced energy output in microbial fuel cells," Energy, Elsevier, vol. 204(C).
    17. Wang, Yuyang & Wang, Zhijie & Hu, Guangxu, 2023. "Bifunctional polypyrrole/ferroferric oxide as anode material for enhanced electricity generation and energy storage in microbial fuel cell," Renewable Energy, Elsevier, vol. 219(P1).
    18. Chen, Bor-Yann & Liao, Jia-Hui & Hsueh, Chung-Chuan & Qu, Ziwei & Hsu, An-Wei & Chang, Chang-Tang & Zhang, Shuping, 2018. "Deciphering biostimulation strategy of using medicinal herbs and tea extracts for bioelectricity generation in microbial fuel cells," Energy, Elsevier, vol. 161(C), pages 1042-1054.
    19. Zinadini, S. & Zinatizadeh, A.A. & Rahimi, M. & Vatanpour, V. & Bahrami, K., 2017. "Energy recovery and hygienic water production from wastewater using an innovative integrated microbial fuel cell–membrane separation process," Energy, Elsevier, vol. 141(C), pages 1350-1362.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:162:y:2020:i:c:p:2220-2226. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.