IDEAS home Printed from https://ideas.repec.org/a/eee/energy/v196y2020ics0360544220302309.html
   My bibliography  Save this article

High electricity generation and COD removal from cattle wastewater in microbial fuel cells with 3D air cathode employed non-precious Cu2O/reduced graphene oxide as cathode catalyst

Author

Listed:
  • Xin, Shuaishuai
  • Shen, Jianguo
  • Liu, Guocheng
  • Chen, Qinghua
  • Xiao, Zhou
  • Zhang, Guodong
  • Xin, Yanjun

Abstract

In this study, we synthesized a non-precious Cu2O decorated reduced graphene oxide composite (Cu2O/rGO) by a facile and direct reduction strategy and evaluated the electricity generation and COD removal performance of MFCs with Cu2O/rGO as cathode catalyst in treating cattle wastewater. The Cu2O/rGO with the mass Cu(Ac)2/GO ratio of 450:50 exhibited the highest catalytic activity by cyclic voltammetry (CV) experiment. The large surface area (363.9 m2 g−1) of Cu2O/rGO with numerous mesoporous exhibited higher exchange current density (12.38 μA cm−2) and lower War-burg impedance (21.82 Ω) comparing with Pt/C (11.99 μA cm−2, 102.10 Ω), and contributed to 4-electron ORR. Notably, the maximum output voltage, power density and coulombic efficiency of MFC with 3D air cathode employed Cu2O/rGO catalyst reached 0.165 V, 1362 mW m−2 and 54.9%, respectively, which were higher than those (0.152 V, 1166 mW m−2 and 53.5%) with 3D air cathode employed Pt/C catalyst in treating cattle wastewater. Moreover, the average COD removal rate of MFC with Cu2O/rGO catalyst reached 71.5%, which were higher than those 69.8% with Pt/C catalyst. Generally, the MFC with 3D air cathode employed non-precious Cu2O/rGO catalyst instead of Pt/C catalysts is a promising method for simultaneous electricity generation and cattle wastewater treatment.

Suggested Citation

  • Xin, Shuaishuai & Shen, Jianguo & Liu, Guocheng & Chen, Qinghua & Xiao, Zhou & Zhang, Guodong & Xin, Yanjun, 2020. "High electricity generation and COD removal from cattle wastewater in microbial fuel cells with 3D air cathode employed non-precious Cu2O/reduced graphene oxide as cathode catalyst," Energy, Elsevier, vol. 196(C).
    • Handle: RePEc:eee:energy:v:196:y:2020:i:c:s0360544220302309
    DOI: 10.1016/j.energy.2020.117123
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0360544220302309
    Download Restriction: Full text for ScienceDirect subscribers only
    File URL: https://libkey.io/10.1016/j.energy.2020.117123?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Taner, Tolga & Sivrioglu, Mecit, 2015. "Energy–exergy analysis and optimisation of a model sugar factory in Turkey," Energy, Elsevier, vol. 93(P1), pages 641-654.
    2. Topal, Huseyin & Taner, Tolga & Naqvi, Syed Arslan Hassan & Altınsoy, Yelda & Amirabedin, Ehsan & Ozkaymak, Mehmet, 2017. "Exergy analysis of a circulating fluidized bed power plant co-firing with olive pits: A case study of power plant in Turkey," Energy, Elsevier, vol. 140(P1), pages 40-46.
    3. Ortiz-Martínez, V.M. & Salar-García, M.J. & Touati, K. & Hernández-Fernández, F.J. & de los Ríos, A.P. & Belhoucine, F. & Berrabbah, A. Alioua, 2016. "Assessment of spinel-type mixed valence Cu/Co and Ni/Co-based oxides for power production in single-chamber microbial fuel cells," Energy, Elsevier, vol. 113(C), pages 1241-1249.
    4. Taner, Tolga, 2018. "Energy and exergy analyze of PEM fuel cell: A case study of modeling and simulations," Energy, Elsevier, vol. 143(C), pages 284-294.
    5. Zinadini, S. & Zinatizadeh, A.A. & Rahimi, M. & Vatanpour, V. & Rahimi, Z., 2017. "High power generation and COD removal in a microbial fuel cell operated by a novel sulfonated PES/PES blend proton exchange membrane," Energy, Elsevier, vol. 125(C), pages 427-438.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Chen, Wenwen & Liu, Zhongliang & Li, Yanxia & Liao, Qiang & Zhu, Xun, 2021. "High electricity generation achieved by depositing rGO@MnO2 composite catalysts on three-dimensional stainless steel fiber felt for preparing the energy-efficient air cathode in microbial fuel cells," Energy, Elsevier, vol. 222(C).
    2. de Ramón-Fernández, A. & Salar-García, M.J. & Ruiz Fernández, D. & Greenman, J. & Ieropoulos, I.A., 2020. "Evaluation of artificial neural network algorithms for predicting the effect of the urine flow rate on the power performance of microbial fuel cells," Energy, Elsevier, vol. 213(C).
    3. Mousavi, Seyed Ali & Mehrpooya, Mehdi, 2021. "Fabrication of copper centered metal organic framework and nitrogen, sulfur dual doped graphene oxide composite as a novel electrocatalyst for oxygen reduction reaction," Energy, Elsevier, vol. 214(C).
    4. Silveira, Gustavo & de Aquino Neto, Sidney & Schneedorf, José Maurício, 2020. "Development, characterization and application of a low-cost single chamber microbial fuel cell based on hydraulic couplers," Energy, Elsevier, vol. 208(C).
    5. Han, Chaoling & Chen, Zhenqian, 2021. "Study on the synergism of thermal transport and electrochemical of PEMFC based on N, P co-doped graphene substrate electrode," Energy, Elsevier, vol. 214(C).
    6. Mokhtar Ali Amrani & Yara Haddad & Firas Obeidat & Atef M. Ghaleb & Sobhi Mejjaouli & Ibrahim Rahoma & Mansour S. A. Galil & Mutahar Shameeri & Ahmed A. Alsofi & Amin Saif, 2022. "Productive and Sustainable H 2 Production from Waste Aluminum Using Copper Oxides-Based Graphene Nanocatalysts: A Techno-Economic Analysis," Sustainability, MDPI, vol. 14(22), pages 1-21, November.
    7. Shahid, Kanwal & Ramasamy, Deepika Lakshmi & Haapasaari, Sampo & Sillanpää, Mika & Pihlajamäki, Arto, 2021. "Stainless steel and carbon brushes as high-performance anodes for energy production and nutrient recovery using the microbial nutrient recovery system," Energy, Elsevier, vol. 233(C).
    8. Hajiali, Mahboube & Farhadian, Mehrdad & khosravi, Mohsen, 2024. "Evaluation of a novel continuous baffled photo-reactor for tetracycline degradation and simultaneous electricity production in photocatalytic fuel cell," Renewable Energy, Elsevier, vol. 226(C).
    9. Mohamed, Hend Omar & Talas, Sawsan Abo & Sayed, Enas T. & Park, Sung-Gwan & Eisa, Tasnim & Abdelkareem, Mohammad Ali & Fadali, Olfat A. & Chae, Kyu-Jung & Castaño, Pedro, 2021. "Enhancing power generation in microbial fuel cell using tungsten carbide on reduced graphene oxide as an efficient anode catalyst material," Energy, Elsevier, vol. 229(C).
    10. Sayed, Enas Taha & Abdelkareem, Mohammad Ali & Alawadhi, Hussain & Elsaid, Khaled & Wilberforce, Tabbi & Olabi, A.G., 2021. "Graphitic carbon nitride/carbon brush composite as a novel anode for yeast-based microbial fuel cells," Energy, Elsevier, vol. 221(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Singh, Gurjeet & Singh, P.J. & Tyagi, V.V. & Barnwal, P. & Pandey, A.K., 2019. "Exergy and thermo-economic analysis of ghee production plant in dairy industry," Energy, Elsevier, vol. 167(C), pages 602-618.
    2. Wang, Bin & Ma, Guangliang & Xu, Dan & Zhang, Le & Zhou, Jiahui, 2018. "Switching sliding-mode control strategy based on multi-type restrictive condition for voltage control of buck converter in auxiliary energy source," Applied Energy, Elsevier, vol. 228(C), pages 1373-1384.
    3. de Rubeis, Tullio & Nardi, Iole & Ambrosini, Dario & Paoletti, Domenica, 2018. "Is a self-sufficient building energy efficient? Lesson learned from a case study in Mediterranean climate," Applied Energy, Elsevier, vol. 218(C), pages 131-145.
    4. Mahdis sadat Jalaee & Alireza Shakibaei & Amin GhasemiNejad & Sayyed Abdolmajid Jalaee & Reza Derakhshani, 2021. "A Novel Computational Intelligence Approach for Coal Consumption Forecasting in Iran," Sustainability, MDPI, vol. 13(14), pages 1-16, July.
    5. Tan, Qinxue & Fan, Kangqi & Tao, Kai & Zhao, Liya & Cai, Meiling, 2020. "A two-degree-of-freedom string-driven rotor for efficient energy harvesting from ultra-low frequency excitations," Energy, Elsevier, vol. 196(C).
    6. Fan, Feilong & Huang, Wentao & Tai, Nengling & Zheng, Xiaodong & Hu, Yan & Ma, Zhoujun, 2018. "A conditional depreciation balancing strategy for the equitable operation of extended hybrid energy storage systems," Applied Energy, Elsevier, vol. 228(C), pages 1937-1952.
    7. Ramos, Vinícius Faria & Pinheiro, Olivert Soares & Ferreira da Costa, Esly & Souza da Costa, Andréa Oliveira, 2019. "A method for exergetic analysis of a real kraft biomass boiler," Energy, Elsevier, vol. 183(C), pages 946-957.
    8. Paolo Postiglione & Alfredo Cartone & Domenica Panzera, 2020. "Economic Convergence in EU NUTS 3 Regions: A Spatial Econometric Perspective," Sustainability, MDPI, vol. 12(17), pages 1-17, August.
    9. Mirhosseini, Mojtaba & Rezania, Alireza & Rosendahl, Lasse, 2019. "Harvesting waste heat from cement kiln shell by thermoelectric system," Energy, Elsevier, vol. 168(C), pages 358-369.
    10. Gayathri Devi, B. & Keshavan, B.K., 2019. "A novel hybrid Phase Shifted-Modified Synchronous Optimal Pulse Width Modulation based 27-level inverter for grid-connected PV system," Energy, Elsevier, vol. 178(C), pages 309-317.
    11. Wu, Gang & Lu, ZhengLi & Guan, Yiheng & Li, Yuelin & Ji, C.Z., 2018. "Characterizing nonlinear interaction between a premixed swirling flame and acoustics: Heat-driven acoustic mode switching and triggering," Energy, Elsevier, vol. 158(C), pages 546-554.
    12. Bai, Jiayu & Wei, Wei & Chen, Laijun & Mei, Shengwei, 2020. "Modeling and dispatch of advanced adiabatic compressed air energy storage under wide operating range in distribution systems with renewable generation," Energy, Elsevier, vol. 206(C).
    13. Hu, Lin & Hu, Xiaosong & Che, Yunhong & Feng, Fei & Lin, Xianke & Zhang, Zhiyong, 2020. "Reliable state of charge estimation of battery packs using fuzzy adaptive federated filtering," Applied Energy, Elsevier, vol. 262(C).
    14. Josip Orović & Vedran Mrzljak & Igor Poljak, 2018. "Efficiency and Losses Analysis of Steam Air Heater from Marine Steam Propulsion Plant," Energies, MDPI, vol. 11(11), pages 1-18, November.
    15. Tiam Kapen, Pascalin & Jeutho Gouajio, Marinette & Yemélé, David, 2020. "Analysis and efficient comparison of ten numerical methods in estimating Weibull parameters for wind energy potential: Application to the city of Bafoussam, Cameroon," Renewable Energy, Elsevier, vol. 159(C), pages 1188-1198.
    16. Hafiz, Faeza & Rodrigo de Queiroz, Anderson & Fajri, Poria & Husain, Iqbal, 2019. "Energy management and optimal storage sizing for a shared community: A multi-stage stochastic programming approach," Applied Energy, Elsevier, vol. 236(C), pages 42-54.
    17. Guo, Hongqiang & Hou, Daizheng & Du, Shangye & Zhao, Ling & Wu, Jian & Yan, Ning, 2020. "A driving pattern recognition-based energy management for plug-in hybrid electric bus to counter the noise of stochastic vehicle mass," Energy, Elsevier, vol. 198(C).
    18. Zhao, Jian & Ozden, Adnan & Shahgaldi, Samaneh & Alaefour, Ibrahim E. & Li, Xianguo & Hamdullahpur, Feridun, 2018. "Effect of Pt loading and catalyst type on the pore structure of porous electrodes in polymer electrolyte membrane (PEM) fuel cells," Energy, Elsevier, vol. 150(C), pages 69-76.
    19. Ismail, A. & Kamarudin, S.K. & Daud, W.R.W. & Masdar, S. & Hasran, U.A., 2018. "Development of 2D multiphase non-isothermal mass transfer model for DMFC system," Energy, Elsevier, vol. 152(C), pages 263-276.
    20. Banaja Mohanty & Rajvikram Madurai Elavarasan & Hany M. Hasanien & Elangovan Devaraj & Rania A. Turky & Rishi Pugazhendhi, 2022. "Parameters Identification of Proton Exchange Membrane Fuel Cell Model Based on the Lightning Search Algorithm," Energies, MDPI, vol. 15(21), pages 1-19, October.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:energy:v:196:y:2020:i:c:s0360544220302309. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.