IDEAS home Printed from https://ideas.repec.org/a/gam/jeners/v13y2020i24p6596-d461967.html
   My bibliography  Save this article

Anode Modification as an Alternative Approach to Improve Electricity Generation in Microbial Fuel Cells

Author

Listed:
  • Dawid Nosek

    (Department of Environmental Biotechnology, University of Warmia and Mazury in Olsztyn, Słoneczna 45g, 10-709 Olsztyn, Poland)

  • Piotr Jachimowicz

    (Department of Environmental Biotechnology, University of Warmia and Mazury in Olsztyn, Słoneczna 45g, 10-709 Olsztyn, Poland)

  • Agnieszka Cydzik-Kwiatkowska

    (Department of Environmental Biotechnology, University of Warmia and Mazury in Olsztyn, Słoneczna 45g, 10-709 Olsztyn, Poland)

Abstract

Sustainable production of electricity from renewable sources by microorganisms is considered an attractive alternative to energy production from fossil fuels. In recent years, research on microbial fuel cells (MFCs) technology for electricity production has increased. However, there are problems with up-scaling MFCs due to the fairly low power output and high operational costs. One of the approaches to improving energy generation in MFCs is by modifying the existing anode materials to provide more electrochemically active sites and improve the adhesion of microorganisms. The aim of this review is to present the effect of anode modification with carbon compounds, metallic nanomaterials, and polymers and the effect that these modifications have on the structure of the microbiological community inhabiting the anode surface. This review summarizes the advantages and disadvantages of individual materials as well as possibilities for using them for environmentally friendly production of electricity in MFCs.

Suggested Citation

  • Dawid Nosek & Piotr Jachimowicz & Agnieszka Cydzik-Kwiatkowska, 2020. "Anode Modification as an Alternative Approach to Improve Electricity Generation in Microbial Fuel Cells," Energies, MDPI, vol. 13(24), pages 1-22, December.
    • Handle: RePEc:gam:jeners:v:13:y:2020:i:24:p:6596-:d:461967
    as

    Download full text from publisher

    File URL: https://www.mdpi.com/1996-1073/13/24/6596/pdf
    Download Restriction: no
    File URL: https://www.mdpi.com/1996-1073/13/24/6596/
    Download Restriction: no
    ---><---

    References listed on IDEAS

    as
    1. Dawid Nosek & Agnieszka Cydzik-Kwiatkowska, 2020. "Microbial Structure and Energy Generation in Microbial Fuel Cells Powered with Waste Anaerobic Digestate," Energies, MDPI, vol. 13(18), pages 1-12, September.
    2. Kumar, Ravinder & Singh, Lakhveer & Zularisam, A.W., 2016. "Exoelectrogens: Recent advances in molecular drivers involved in extracellular electron transfer and strategies used to improve it for microbial fuel cell applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 56(C), pages 1322-1336.
    3. Slate, Anthony J. & Whitehead, Kathryn A. & Brownson, Dale A.C. & Banks, Craig E., 2019. "Microbial fuel cells: An overview of current technology," Renewable and Sustainable Energy Reviews, Elsevier, vol. 101(C), pages 60-81.
    4. Liu, Shu-Hui & Lai, Yu-Chuan & Lin, Chi-Wen, 2019. "Enhancement of power generation by microbial fuel cells in treating toluene-contaminated groundwater: Developments of composite anodes with various compositions," Applied Energy, Elsevier, vol. 233, pages 922-929.
    5. Gajda, Iwona & Greenman, John & Ieropoulos, Ioannis, 2020. "Microbial Fuel Cell stack performance enhancement through carbon veil anode modification with activated carbon powder," Applied Energy, Elsevier, vol. 262(C).
    6. Wang, Yuyang & Wen, Qing & Chen, Ye & Li, Wei, 2020. "Conductive polypyrrole-carboxymethyl cellulose-titanium nitride/carbon brush hydrogels as bioanodes for enhanced energy output in microbial fuel cells," Energy, Elsevier, vol. 204(C).
    7. Wang, Yuyang & Zhu, Lin & An, Lijuan, 2020. "Electricity generation and storage in microbial fuel cells with porous polypyrrole-base composite modified carbon brush anodes," Renewable Energy, Elsevier, vol. 162(C), pages 2220-2226.
    8. Enas Taha Sayed & Hussain Alawadhi & Khaled Elsaid & A. G. Olabi & Maryam Adel Almakrani & Shaikha Tamim Bin Tamim & Ghada H. M. Alafranji & Mohammad Ali Abdelkareem, 2020. "A Carbon-Cloth Anode Electroplated with Iron Nanostructure for Microbial Fuel Cell Operated with Real Wastewater," Sustainability, MDPI, vol. 12(16), pages 1-11, August.
    9. Wang, Yuyang & Chen, Ye & Wen, Qing & Zheng, Hongtao & Xu, Haitao & Qi, Lijuan, 2019. "Electricity generation, energy storage, and microbial-community analysis in microbial fuel cells with multilayer capacitive anodes," Energy, Elsevier, vol. 189(C).
    10. Andrea G. Capodaglio & Gustaf Olsson, 2019. "Energy Issues in Sustainable Urban Wastewater Management: Use, Demand Reduction and Recovery in the Urban Water Cycle," Sustainability, MDPI, vol. 12(1), pages 1-17, December.
    11. Hindatu, Y. & Annuar, M.S.M. & Gumel, A.M., 2017. "Mini-review: Anode modification for improved performance of microbial fuel cell," Renewable and Sustainable Energy Reviews, Elsevier, vol. 73(C), pages 236-248.
    12. Dipak A. Jadhav & Makarand M. Ghangrekar, 2020. "Optimising the proportion of pure and mixed culture in inoculum to enhance the performance of microbial fuel cells," International Journal of Environmental Technology and Management, Inderscience Enterprises Ltd, vol. 23(1), pages 50-67.
    13. David V. P. Sanchez & Daniel Jacobs & Kelvin Gregory & Jiyong Huang & Yushi Hu & Radisav Vidic & Minhee Yun, 2015. "Changes in Carbon Electrode Morphology Affect Microbial Fuel Cell Performance with Shewanella oneidensis MR-1," Energies, MDPI, vol. 8(3), pages 1-13, March.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Dawid Nosek & Tomasz Mikołajczyk & Agnieszka Cydzik-Kwiatkowska, 2023. "Anode Modification with Fe 2 O 3 Affects the Anode Microbiome and Improves Energy Generation in Microbial Fuel Cells Powered by Wastewater," IJERPH, MDPI, vol. 20(3), pages 1-21, January.
    2. Liping Fan & Yaobin Xi, 2021. "Effect of Polypyrrole-Fe 3 O 4 Composite Modified Anode and Its Electrodeposition Time on the Performance of Microbial Fuel Cells," Energies, MDPI, vol. 14(9), pages 1-10, April.
    3. Maria G. Savvidou & Pavlos K. Pandis & Diomi Mamma & Georgia Sourkouni & Christos Argirusis, 2022. "Organic Waste Substrates for Bioenergy Production via Microbial Fuel Cells: A Key Point Review," Energies, MDPI, vol. 15(15), pages 1-53, August.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Shahid, Kanwal & Ramasamy, Deepika Lakshmi & Haapasaari, Sampo & Sillanpää, Mika & Pihlajamäki, Arto, 2021. "Stainless steel and carbon brushes as high-performance anodes for energy production and nutrient recovery using the microbial nutrient recovery system," Energy, Elsevier, vol. 233(C).
    2. Chouhan, Raghuraj Singh & Gandhi, Sonu & Verma, Suresh K. & Jerman, Ivan & Baker, Syed & Štrok, Marko, 2023. "Recent advancements in the development of Two-Dimensional nanostructured based anode materials for stable power density in microbial fuel cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 188(C).
    3. Mohamed, Hend Omar & Talas, Sawsan Abo & Sayed, Enas T. & Park, Sung-Gwan & Eisa, Tasnim & Abdelkareem, Mohammad Ali & Fadali, Olfat A. & Chae, Kyu-Jung & Castaño, Pedro, 2021. "Enhancing power generation in microbial fuel cell using tungsten carbide on reduced graphene oxide as an efficient anode catalyst material," Energy, Elsevier, vol. 229(C).
    4. Chen, Wenwen & Liu, Zhongliang & Li, Yanxia & Liao, Qiang & Zhu, Xun, 2021. "High electricity generation achieved by depositing rGO@MnO2 composite catalysts on three-dimensional stainless steel fiber felt for preparing the energy-efficient air cathode in microbial fuel cells," Energy, Elsevier, vol. 222(C).
    5. Xu, Haitao & Du, Yanan & Chen, Ye & Wen, Qing & Lin, Cunguo & Zheng, Jiyong & Qiu, Zhenghui, 2022. "Electricity generation in simulated benthic microbial fuel cell with conductive polyaniline-polypyrole composite hydrogel anode," Renewable Energy, Elsevier, vol. 183(C), pages 242-250.
    6. Liu, Hong-zhou & Chen, Tie-zhu & Wang, Nan & Zhang, Yu-rui & Li, Jian-chang, 2024. "A new strategy for improving MFC power output by shared electrode MFC–MEC coupling," Applied Energy, Elsevier, vol. 359(C).
    7. Dawid Nosek & Tomasz Mikołajczyk & Agnieszka Cydzik-Kwiatkowska, 2023. "Anode Modification with Fe 2 O 3 Affects the Anode Microbiome and Improves Energy Generation in Microbial Fuel Cells Powered by Wastewater," IJERPH, MDPI, vol. 20(3), pages 1-21, January.
    8. Farahmand Habibi, Maryam & Arvand, Majid & Sohrabnezhad, Shabnam, 2021. "Boosting bioelectricity generation in microbial fuel cells using metal@metal oxides/nitrogen-doped carbon quantum dots," Energy, Elsevier, vol. 223(C).
    9. Leicester, Daniel & Amezaga, Jaime & Heidrich, Elizabeth, 2020. "Is bioelectrochemical energy production from wastewater a reality? Identifying and standardising the progress made in scaling up microbial electrolysis cells," Renewable and Sustainable Energy Reviews, Elsevier, vol. 133(C).
    10. Khaya Pearlman Shabangu & Manimagalay Chetty & Babatunde Femi Bakare, 2024. "Optimization and Modeling of a Dual-Chamber Microbial Fuel Cell (DCMFC) for Industrial Wastewater Treatment: A Box–Behnken Design Approach," Energies, MDPI, vol. 17(11), pages 1-44, June.
    11. Yifan Yu & Jafar Ali & Yuesuo Yang & Peijing Kuang & Wenjing Zhang & Ying Lu & Yan Li, 2022. "Synchronous Cr(VI) Remediation and Energy Production Using Microbial Fuel Cell from a Subsurface Environment: A Review," Energies, MDPI, vol. 15(6), pages 1-22, March.
    12. Aritro Banerjee & Rajnish Kaur Calay & Mohamad Mustafa, 2022. "Review on Material and Design of Anode for Microbial Fuel Cell," Energies, MDPI, vol. 15(6), pages 1-17, March.
    13. Vasileios A. Tzanakakis & Andrea G. Capodaglio & Andreas N. Angelakis, 2023. "Insights into Global Water Reuse Opportunities," Sustainability, MDPI, vol. 15(17), pages 1-30, August.
    14. Chang, Sheng-Tien & Liu, Shu-Hui & Li, Bing-Ye & Zheng, Zhi-Xian, 2023. "Improving the anodic packing and harmonizing the proton exchange membrane of bioelectrochemical systems for treating waste gases and generating electricity," Renewable Energy, Elsevier, vol. 204(C), pages 59-66.
    15. Nassef, Ahmed M. & Olabi, A.G. & Rodriguez, Cristina & Abdelkareem, Mohammad Ali & Rezk, Hegazy, 2021. "Optimal operating parameter determination and modeling to enhance methane production from macroalgae," Renewable Energy, Elsevier, vol. 163(C), pages 2190-2197.
    16. Kumar, R. & Strezov, V., 2021. "Thermochemical production of bio-oil: A review of downstream processing technologies for bio-oil upgrading, production of hydrogen and high value-added products," Renewable and Sustainable Energy Reviews, Elsevier, vol. 135(C).
    17. Hu, Jianjun & Zhang, Quanguo & Lee, Duu-Jong & Ngo, Huu Hao, 2018. "Feasible use of microbial fuel cells for pollution treatment," Renewable Energy, Elsevier, vol. 129(PB), pages 824-829.
    18. Tajdid Khajeh, Rana & Aber, Soheil & Zarei, Mahmoud, 2020. "Comparison of NiCo2O4, CoNiAl-LDH, and CoNiAl-LDH@NiCo2O4 performances as ORR catalysts in MFC cathode," Renewable Energy, Elsevier, vol. 154(C), pages 1263-1271.
    19. Sekar, Aiswarya Devi & Jayabalan, Tamilmani & Muthukumar, Harshiny & Chandrasekaran, Nivedhini Iswarya & Mohamed, Samsudeen Naina & Matheswaran, Manickam, 2019. "Enhancing power generation and treatment of dairy waste water in microbial fuel cell using Cu-doped iron oxide nanoparticles decorated anode," Energy, Elsevier, vol. 172(C), pages 173-180.
    20. Abdul Ghani Olabi & Tabbi Wilberforce & Mohammad Ali Abdelkareem & Mohamad Ramadan, 2021. "Critical Review of Flywheel Energy Storage System," Energies, MDPI, vol. 14(8), pages 1-33, April.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:gam:jeners:v:13:y:2020:i:24:p:6596-:d:461967. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: MDPI Indexing Manager (email available below). General contact details of provider: https://www.mdpi.com .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.