IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v139y2019icp1412-1427.html
   My bibliography  Save this article

Comparison of low wind speed aerodynamics of unsymmetrical blade H-Darrieus rotors-blade camber and curvature signatures for performance improvement

Author

Listed:
  • Sengupta, A.R.
  • Biswas, A.
  • Gupta, R.

Abstract

Unsymmetrical blade Vertical axis wind turbine (VAWT) can be nicely adapted in the built environment because of its improved performance, self-starting ability, simple construction, easy maintenance and capability to adapt to wind direction changes. For proliferation of such VAWT installations, the challenge is to improve its efficiency in low wind speed condition (usually less than 10 m/s) of the built environment, which depends on its blade profile design. In an unsymmetrical blade, blade thickness-to-chord ratio, percentage camber, blade curvature around aerodynamic moment center are the controlling parameters for effective blade-fluid interactions for performance improvement, thus requiring a detailed investigation of the aerodynamics of unsymmetrical blade VAWT. The objective of this paper is to compare low wind speed aerodynamics of two different unsymmetrical airfoil blade profiles to obtain design information of blade camber and blade curvature around aerodynamic moment center for performance improvement of H-Darrieus VAWT, which is hardly available in the existing literature. Detailed blade-fluid interactions are analysed by Ansys Computational Fluid Dynamics (CFD) software for different low wind speeds between 4 m/s and 8 m/s. It is found that more rounded curvature of the suction side surface of advancing S815 blade around aerodynamic moment center and thicker blade profile (maximum thickness is 26.2% at 25.7% chord) has a distinct influence for performance improvement of the rotor in the power stroke. In the returning stroke, the VAWT is benefited from higher camber of EN0005 blade (maximum camber percentage of 10% at 55% chord) and lesser blade curvature of the blade suction side. Next, vorticity structures of each blade profile have also been monitored at different azimuthal positions and necessary performance insights with regards the development of static/deep stall vortices and other boundary layer features have been drawn. Further, blade polars, power performance, and blade loading have also been obtained and compared with published results. Overall better designs of unsymmetrical blade profiles have also been recommended. The present study leads to the understanding of the design blade camber and curvature signatures in both power and returning strokes for possible performance improvement of small-sized VAWT in low wind speed condition.

Suggested Citation

  • Sengupta, A.R. & Biswas, A. & Gupta, R., 2019. "Comparison of low wind speed aerodynamics of unsymmetrical blade H-Darrieus rotors-blade camber and curvature signatures for performance improvement," Renewable Energy, Elsevier, vol. 139(C), pages 1412-1427.
  • Handle: RePEc:eee:renene:v:139:y:2019:i:c:p:1412-1427
    DOI: 10.1016/j.renene.2019.03.054
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148119303593
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2019.03.054?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Pierre Tchakoua & René Wamkeue & Mohand Ouhrouche & Tommy Andy Tameghe & Gabriel Ekemb, 2015. "A New Approach for Modeling Darrieus-Type Vertical Axis Wind Turbine Rotors Using Electrical Equivalent Circuit Analogy: Basis of Theoretical Formulations and Model Development," Energies, MDPI, vol. 8(10), pages 1-34, September.
    2. Xiao, Qing & Liu, Wendi & Incecik, Atilla, 2013. "Flow control for VATT by fixed and oscillating flap," Renewable Energy, Elsevier, vol. 51(C), pages 141-152.
    3. Eboibi, Okeoghene & Danao, Louis Angelo M. & Howell, Robert J., 2016. "Experimental investigation of the influence of solidity on the performance and flow field aerodynamics of vertical axis wind turbines at low Reynolds numbers," Renewable Energy, Elsevier, vol. 92(C), pages 474-483.
    4. Rezaeiha, Abdolrahim & Kalkman, Ivo & Blocken, Bert, 2017. "Effect of pitch angle on power performance and aerodynamics of a vertical axis wind turbine," Applied Energy, Elsevier, vol. 197(C), pages 132-150.
    5. Howell, Robert & Qin, Ning & Edwards, Jonathan & Durrani, Naveed, 2010. "Wind tunnel and numerical study of a small vertical axis wind turbine," Renewable Energy, Elsevier, vol. 35(2), pages 412-422.
    6. Bhayo, Bilawal A. & Al-Kayiem, Hussain H., 2017. "Experimental characterization and comparison of performance parameters of S-rotors for standalone wind power system," Energy, Elsevier, vol. 138(C), pages 752-763.
    7. Hashem, I. & Mohamed, M.H., 2018. "Aerodynamic performance enhancements of H-rotor Darrieus wind turbine," Energy, Elsevier, vol. 142(C), pages 531-545.
    8. Bedon, Gabriele & De Betta, Stefano & Benini, Ernesto, 2016. "Performance-optimized airfoil for Darrieus wind turbines," Renewable Energy, Elsevier, vol. 94(C), pages 328-340.
    9. Sengupta, A.R. & Biswas, A. & Gupta, R., 2016. "Studies of some high solidity symmetrical and unsymmetrical blade H-Darrieus rotors with respect to starting characteristics, dynamic performances and flow physics in low wind streams," Renewable Energy, Elsevier, vol. 93(C), pages 536-547.
    10. Mohamed, M.H., 2012. "Performance investigation of H-rotor Darrieus turbine with new airfoil shapes," Energy, Elsevier, vol. 47(1), pages 522-530.
    11. Bausas, Michael D. & Danao, Louis Angelo M., 2015. "The aerodynamics of a camber-bladed vertical axis wind turbine in unsteady wind," Energy, Elsevier, vol. 93(P1), pages 1155-1164.
    12. Armstrong, Shawn & Fiedler, Andrzej & Tullis, Stephen, 2012. "Flow separation on a high Reynolds number, high solidity vertical axis wind turbine with straight and canted blades and canted blades with fences," Renewable Energy, Elsevier, vol. 41(C), pages 13-22.
    13. Singh, M.A. & Biswas, A. & Misra, R.D., 2015. "Investigation of self-starting and high rotor solidity on the performance of a three S1210 blade H-type Darrieus rotor," Renewable Energy, Elsevier, vol. 76(C), pages 381-387.
    14. Zamani, Mahdi & Maghrebi, Mohammad Javad & Varedi, Seyed Rasoul, 2016. "Starting torque improvement using J-shaped straight-bladed Darrieus vertical axis wind turbine by means of numerical simulation," Renewable Energy, Elsevier, vol. 95(C), pages 109-126.
    15. Batista, N.C. & Melício, R. & Mendes, V.M.F. & Calderón, M. & Ramiro, A., 2015. "On a self-start Darrieus wind turbine: Blade design and field tests," Renewable and Sustainable Energy Reviews, Elsevier, vol. 52(C), pages 508-522.
    16. Subramanian, Abhishek & Yogesh, S. Arun & Sivanandan, Hrishikesh & Giri, Abhijit & Vasudevan, Madhavan & Mugundhan, Vivek & Velamati, Ratna Kishore, 2017. "Effect of airfoil and solidity on performance of small scale vertical axis wind turbine using three dimensional CFD model," Energy, Elsevier, vol. 133(C), pages 179-190.
    17. Mohamed, M.H., 2013. "Impacts of solidity and hybrid system in small wind turbines performance," Energy, Elsevier, vol. 57(C), pages 495-504.
    18. Lin, San-Yih & Lin, Yang-You & Bai, Chi-Jeng & Wang, Wei-Cheng, 2016. "Performance analysis of vertical-axis-wind-turbine blade with modified trailing edge through computational fluid dynamics," Renewable Energy, Elsevier, vol. 99(C), pages 654-662.
    19. Li, Qing’an & Maeda, Takao & Kamada, Yasunari & Murata, Junsuke & Shimizu, Kento & Ogasawara, Tatsuhiko & Nakai, Alisa & Kasuya, Takuji, 2016. "Effect of solidity on aerodynamic forces around straight-bladed vertical axis wind turbine by wind tunnel experiments (depending on number of blades)," Renewable Energy, Elsevier, vol. 96(PA), pages 928-939.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Tian, Wenlong & Ni, Xiwen & Li, Bo & Yang, Guangyong & Mao, Zhaoyong, 2023. "Improving the efficiency of Darrieus turbines through a gear-like turbine layout," Energy, Elsevier, vol. 267(C).
    2. Minhui Tong & Weidong Zhu & Xiang Zhao & Meilin Yu & Kan Liu & Gang Li, 2020. "Free and Forced Vibration Analysis of H-type and Hybrid Vertical-Axis Wind Turbines," Energies, MDPI, vol. 13(24), pages 1-32, December.
    3. Pengfei Yan & Yaning Li & Qiang Gao & Shuai Lian & Qihui Wu, 2023. "Design and Analysis of an Adaptive Dual-Drive Lift–Drag Composite Vertical-Axis Wind Turbine Generator," Energies, MDPI, vol. 16(22), pages 1-15, November.
    4. Guanghao Li & Guoying Wu & Lei Tan & Honggang Fan, 2023. "A Review: Design and Optimization Approaches of the Darrieus Water Turbine," Sustainability, MDPI, vol. 15(14), pages 1-28, July.
    5. Marzec, Łukasz & Buliński, Zbigniew & Krysiński, Tomasz & Tumidajski, Jakub, 2023. "Structural optimisation of H-Rotor wind turbine blade based on one-way Fluid Structure Interaction approach," Renewable Energy, Elsevier, vol. 216(C).

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Meana-Fernández, Andrés & Solís-Gallego, Irene & Fernández Oro, Jesús Manuel & Argüelles Díaz, Katia María & Velarde-Suárez, Sandra, 2018. "Parametrical evaluation of the aerodynamic performance of vertical axis wind turbines for the proposal of optimized designs," Energy, Elsevier, vol. 147(C), pages 504-517.
    2. Barnes, Andrew & Marshall-Cross, Daniel & Hughes, Ben Richard, 2021. "Towards a standard approach for future Vertical Axis Wind Turbine aerodynamics research and development," Renewable and Sustainable Energy Reviews, Elsevier, vol. 148(C).
    3. Zhu, Haitian & Hao, Wenxing & Li, Chun & Ding, Qinwei & Wu, Baihui, 2018. "A critical study on passive flow control techniques for straight-bladed vertical axis wind turbine," Energy, Elsevier, vol. 165(PA), pages 12-25.
    4. Rezaeiha, Abdolrahim & Montazeri, Hamid & Blocken, Bert, 2018. "Towards optimal aerodynamic design of vertical axis wind turbines: Impact of solidity and number of blades," Energy, Elsevier, vol. 165(PB), pages 1129-1148.
    5. Li, Qing'an & Maeda, Takao & Kamada, Yasunari & Shimizu, Kento & Ogasawara, Tatsuhiko & Nakai, Alisa & Kasuya, Takuji, 2017. "Effect of rotor aspect ratio and solidity on a straight-bladed vertical axis wind turbine in three-dimensional analysis by the panel method," Energy, Elsevier, vol. 121(C), pages 1-9.
    6. Hand, Brian & Kelly, Ger & Cashman, Andrew, 2021. "Aerodynamic design and performance parameters of a lift-type vertical axis wind turbine: A comprehensive review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 139(C).
    7. Ma, Ning & Lei, Hang & Han, Zhaolong & Zhou, Dai & Bao, Yan & Zhang, Kai & Zhou, Lei & Chen, Caiyong, 2018. "Airfoil optimization to improve power performance of a high-solidity vertical axis wind turbine at a moderate tip speed ratio," Energy, Elsevier, vol. 150(C), pages 236-252.
    8. Wang, Ying & Shen, Sheng & Li, Gaohui & Huang, Diangui & Zheng, Zhongquan, 2018. "Investigation on aerodynamic performance of vertical axis wind turbine with different series airfoil shapes," Renewable Energy, Elsevier, vol. 126(C), pages 801-818.
    9. Pedram Ghiasi & Gholamhassan Najafi & Barat Ghobadian & Ali Jafari & Mohamed Mazlan, 2022. "Analytical Study of the Impact of Solidity, Chord Length, Number of Blades, Aspect Ratio and Airfoil Type on H-Rotor Darrieus Wind Turbine Performance at Low Reynolds Number," Sustainability, MDPI, vol. 14(5), pages 1-14, February.
    10. Jafari, Mohammad & Razavi, Alireza & Mirhosseini, Mojtaba, 2018. "Effect of airfoil profile on aerodynamic performance and economic assessment of H-rotor vertical axis wind turbines," Energy, Elsevier, vol. 165(PA), pages 792-810.
    11. Unnikrishnan Divakaran & Ajith Ramesh & Akram Mohammad & Ratna Kishore Velamati, 2021. "Effect of Helix Angle on the Performance of Helical Vertical Axis Wind Turbine," Energies, MDPI, vol. 14(2), pages 1-24, January.
    12. Liu, Qingsong & Miao, Weipao & Ye, Qi & Li, Chun, 2022. "Performance assessment of an innovative Gurney flap for straight-bladed vertical axis wind turbine," Renewable Energy, Elsevier, vol. 185(C), pages 1124-1138.
    13. Jin, Xin & Zhao, Gaoyuan & Gao, KeJun & Ju, Wenbin, 2015. "Darrieus vertical axis wind turbine: Basic research methods," Renewable and Sustainable Energy Reviews, Elsevier, vol. 42(C), pages 212-225.
    14. Ghazalla, R.A. & Mohamed, M.H. & Hafiz, A.A., 2019. "Synergistic analysis of a Darrieus wind turbine using computational fluid dynamics," Energy, Elsevier, vol. 189(C).
    15. Wong, Kok Hoe & Chong, Wen Tong & Poh, Sin Chew & Shiah, Yui-Chuin & Sukiman, Nazatul Liana & Wang, Chin-Tsan, 2018. "3D CFD simulation and parametric study of a flat plate deflector for vertical axis wind turbine," Renewable Energy, Elsevier, vol. 129(PA), pages 32-55.
    16. Su, Jie & Chen, Yaoran & Han, Zhaolong & Zhou, Dai & Bao, Yan & Zhao, Yongsheng, 2020. "Investigation of V-shaped blade for the performance improvement of vertical axis wind turbines," Applied Energy, Elsevier, vol. 260(C).
    17. Li, Qingan & Cai, Chang & Maeda, Takao & Kamada, Yasunari & Shimizu, Kento & Dong, Yehong & Zhang, Fanghong & Xu, Jianzhong, 2021. "Visualization of aerodynamic forces and flow field on a straight-bladed vertical axis wind turbine by wind tunnel experiments and panel method," Energy, Elsevier, vol. 225(C).
    18. Chen, Jian & Yang, Hongxing & Yang, Mo & Xu, Hongtao & Hu, Zuohuan, 2015. "A comprehensive review of the theoretical approaches for the airfoil design of lift-type vertical axis wind turbine," Renewable and Sustainable Energy Reviews, Elsevier, vol. 51(C), pages 1709-1720.
    19. Peng, H.Y. & Han, Z.D. & Liu, H.J. & Lin, K. & Lam, H.F., 2020. "Assessment and optimization of the power performance of twin vertical axis wind turbines via numerical simulations," Renewable Energy, Elsevier, vol. 147(P1), pages 43-54.
    20. Li, Qing'an & Maeda, Takao & Kamada, Yasunari & Murata, Junsuke & Kawabata, Toshiaki & Shimizu, Kento & Ogasawara, Tatsuhiko & Nakai, Alisa & Kasuya, Takuji, 2016. "Wind tunnel and numerical study of a straight-bladed vertical axis wind turbine in three-dimensional analysis (Part I: For predicting aerodynamic loads and performance)," Energy, Elsevier, vol. 106(C), pages 443-452.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:139:y:2019:i:c:p:1412-1427. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.