IDEAS home Printed from https://ideas.repec.org/a/eee/renene/v136y2019icp657-663.html
   My bibliography  Save this article

Form-stable oxalic acid dihydrate/glycolic acid-based composite PCMs for thermal energy storage

Author

Listed:
  • Wang, Jie
  • Han, Weifang
  • Ge, Chunhua
  • Guan, Hongyu
  • Yang, Huizhi
  • Zhang, Xiangdong

Abstract

The development of high efficient materials for storage and utilization of sustainable thermal energy is very meaningful. Herein, in this research, an oxalic acid dihydrate/glycolic acid (OG) binary eutectic mixtures with the ratio of 80 wt%/20 wt% was prepared as phase change material (PCM), hydrothermal carbon (HTC) and poly (acrylamide-co-acrylic acid) copolymer (PAAAM) were separately and together used as support materials to solve liquid-state leakage problem and improve thermal conductivity. Three form-stable PCM composites (OG/PAAAM, OG/HTC/PAAAM and OG/HTC) were synthesized. The prepared composites were studied by XRD and FT-IR spectra, their thermophysical properties and PCM storage properties were investigated using differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The OG/PAAAM, OG/HTC/PAAAM and OG/HTC showed the high loading rate to OG content, which are 1718 wt%, 1329 wt% and 1150 wt%, and the latent heat are 289.6, 313.2 and 318.8 J/g, respectively. In addition, the composites possess excellent recyclability after 101 times melting-freezing cycles. Compared to pure OG, OG/PAAAM and OG/HTC/PAAAM (0.2766, 0.3125 and 0.8538 W/m K), the OG/HTC exhibit a higher thermal conductivity of 1.3867 W/m K.

Suggested Citation

  • Wang, Jie & Han, Weifang & Ge, Chunhua & Guan, Hongyu & Yang, Huizhi & Zhang, Xiangdong, 2019. "Form-stable oxalic acid dihydrate/glycolic acid-based composite PCMs for thermal energy storage," Renewable Energy, Elsevier, vol. 136(C), pages 657-663.
  • Handle: RePEc:eee:renene:v:136:y:2019:i:c:p:657-663
    DOI: 10.1016/j.renene.2019.01.063
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0960148119300631
    Download Restriction: Full text for ScienceDirect subscribers only

    File URL: https://libkey.io/10.1016/j.renene.2019.01.063?utm_source=ideas
    LibKey link: if access is restricted and if your library uses this service, LibKey will redirect you to where you can use your library subscription to access this item
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Zhang, P. & Xiao, X. & Ma, Z.W., 2016. "A review of the composite phase change materials: Fabrication, characterization, mathematical modeling and application to performance enhancement," Applied Energy, Elsevier, vol. 165(C), pages 472-510.
    2. Tyagi, V.V. & Kaushik, S.C. & Tyagi, S.K. & Akiyama, T., 2011. "Development of phase change materials based microencapsulated technology for buildings: A review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(2), pages 1373-1391, February.
    3. Wang, Changhong & Lin, Tao & Li, Na & Zheng, Huanpei, 2016. "Heat transfer enhancement of phase change composite material: Copper foam/paraffin," Renewable Energy, Elsevier, vol. 96(PA), pages 960-965.
    4. Tang, Jia & Yang, Mu & Yu, Fang & Chen, Xingyu & Tan, Li & Wang, Ge, 2017. "1-Octadecanol@hierarchical porous polymer composite as a novel shape-stability phase change material for latent heat thermal energy storage," Applied Energy, Elsevier, vol. 187(C), pages 514-522.
    5. Pereira da Cunha, Jose & Eames, Philip, 2016. "Thermal energy storage for low and medium temperature applications using phase change materials – A review," Applied Energy, Elsevier, vol. 177(C), pages 227-238.
    6. Browne, Maria C. & Boyd, Ellen & McCormack, Sarah J., 2017. "Investigation of the corrosive properties of phase change materials in contact with metals and plastic," Renewable Energy, Elsevier, vol. 108(C), pages 555-568.
    7. İnce, Şeyma & Seki, Yoldas & Akif Ezan, Mehmet & Turgut, Alpaslan & Erek, Aytunc, 2015. "Thermal properties of myristic acid/graphite nanoplates composite phase change materials," Renewable Energy, Elsevier, vol. 75(C), pages 243-248.
    8. Zhang, Xiaoguang & Yin, Zhaoyu & Meng, Dezhi & Huang, Zhaohui & Wen, Ruilong & Huang, Yaoting & Min, Xin & Liu, Yangai & Fang, Minghao & Wu, Xiaowen, 2017. "Shape-stabilized composite phase change materials with high thermal conductivity based on stearic acid and modified expanded vermiculite," Renewable Energy, Elsevier, vol. 112(C), pages 113-123.
    9. Medrano, Marc & Gil, Antoni & Martorell, Ingrid & Potau, Xavi & Cabeza, Luisa F., 2010. "State of the art on high-temperature thermal energy storage for power generation. Part 2--Case studies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 56-72, January.
    10. Han, Lipeng & Xie, Shaolei & Liu, Shang & Sun, Jinhe & Jia, Yongzhong & Jing, Yan, 2017. "Effects of sodium chloride on the thermal behavior of oxalic acid dihydrate for thermal energy storage," Applied Energy, Elsevier, vol. 185(P1), pages 762-767.
    11. Gimenez-Gavarrell, Pau & Fereres, Sonia, 2017. "Glass encapsulated phase change materials for high temperature thermal energy storage," Renewable Energy, Elsevier, vol. 107(C), pages 497-507.
    12. Su, Weiguang & Darkwa, Jo & Kokogiannakis, Georgios, 2015. "Review of solid–liquid phase change materials and their encapsulation technologies," Renewable and Sustainable Energy Reviews, Elsevier, vol. 48(C), pages 373-391.
    13. Chen, Zhong-Hua & Yu, Fei & Zeng, Xing-Rong & Zhang, Zheng-Guo, 2012. "Preparation, characterization and thermal properties of nanocapsules containing phase change material n-dodecanol by miniemulsion polymerization with polymerizable emulsifier," Applied Energy, Elsevier, vol. 91(1), pages 7-12.
    14. Gil, Antoni & Medrano, Marc & Martorell, Ingrid & Lázaro, Ana & Dolado, Pablo & Zalba, Belén & Cabeza, Luisa F., 2010. "State of the art on high temperature thermal energy storage for power generation. Part 1--Concepts, materials and modellization," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(1), pages 31-55, January.
    Full references (including those not matched with items on IDEAS)

    Citations

    Citations are extracted by the CitEc Project, subscribe to its RSS feed for this item.
    as


    Cited by:

    1. Liu, Yushi & Sun, Fuzheng & Yu, Kunyang & Yang, Yingzi, 2020. "Experimental and numerical research on development of synthetic heat storage form incorporating phase change materials to protect concrete in cold weather," Renewable Energy, Elsevier, vol. 149(C), pages 1424-1433.
    2. Bashiri Rezaie, Ali & Montazer, Majid, 2020. "Shape-stable thermo-responsive nano Fe3O4/fatty acids/PET composite phase-change material for thermal energy management and saving applications," Applied Energy, Elsevier, vol. 262(C).
    3. Bashiri Rezaie, Ali & Montazer, Majid, 2019. "One-step preparation of magnetically responsive nano CuFe2O4/fatty acids/polyester composite for dynamic thermal energy management applications," Renewable Energy, Elsevier, vol. 143(C), pages 1839-1851.
    4. Song, Shaokun & Ai, Hong & Zhu, Wanting & Qiu, Feng & Wang, Yuqi & Zhou, Jian, 2020. "Eco-friendly electrospun nanofibrous membranes with high thermal energy capacity and improved thermal transfer efficiency," Renewable Energy, Elsevier, vol. 148(C), pages 504-511.
    5. Drissi, Sarra & Ling, Tung-Chai & Mo, Kim Hung, 2020. "Thermal performance of a solar energy storage concrete panel incorporating phase change material aggregates developed for thermal regulation in buildings," Renewable Energy, Elsevier, vol. 160(C), pages 817-829.

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Liu, Yang & Zheng, Ruowei & Li, Ji, 2022. "High latent heat phase change materials (PCMs) with low melting temperature for thermal management and storage of electronic devices and power batteries: Critical review," Renewable and Sustainable Energy Reviews, Elsevier, vol. 168(C).
    2. Zeinelabdein, Rami & Omer, Siddig & Gan, Guohui, 2018. "Critical review of latent heat storage systems for free cooling in buildings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 82(P3), pages 2843-2868.
    3. Kahwaji, Samer & Johnson, Michel B. & Kheirabadi, Ali C. & Groulx, Dominic & White, Mary Anne, 2018. "A comprehensive study of properties of paraffin phase change materials for solar thermal energy storage and thermal management applications," Energy, Elsevier, vol. 162(C), pages 1169-1182.
    4. Hobold, Gustavo M. & da Silva, Alexandre K., 2017. "Critical phenomena and their effect on thermal energy storage in supercritical fluids," Applied Energy, Elsevier, vol. 205(C), pages 1447-1458.
    5. Nassima Radouane, 2022. "A Comprehensive Review of Composite Phase Change Materials (cPCMs) for Thermal Management Applications, Including Manufacturing Processes, Performance, and Applications," Energies, MDPI, vol. 15(21), pages 1-28, November.
    6. Drissi, Sarra & Ling, Tung-Chai & Mo, Kim Hung & Eddhahak, Anissa, 2019. "A review of microencapsulated and composite phase change materials: Alteration of strength and thermal properties of cement-based materials," Renewable and Sustainable Energy Reviews, Elsevier, vol. 110(C), pages 467-484.
    7. Tumirah, K. & Hussein, M.Z. & Zulkarnain, Z. & Rafeadah, R., 2014. "Nano-encapsulated organic phase change material based on copolymer nanocomposites for thermal energy storage," Energy, Elsevier, vol. 66(C), pages 881-890.
    8. Nomura, Takahiro & Zhu, Chunyu & Nan, Sheng & Tabuchi, Kazuki & Wang, Shuangfeng & Akiyama, Tomohiro, 2016. "High thermal conductivity phase change composite with a metal-stabilized carbon-fiber network," Applied Energy, Elsevier, vol. 179(C), pages 1-6.
    9. Lazaro, Ana & Peñalosa, Conchita & Solé, Aran & Diarce, Gonzalo & Haussmann, Thomas & Fois, Magali & Zalba, Belén & Gshwander, Stefan & Cabeza, Luisa F., 2013. "Intercomparative tests on phase change materials characterisation with differential scanning calorimeter," Applied Energy, Elsevier, vol. 109(C), pages 415-420.
    10. Anisur, M.R. & Mahfuz, M.H. & Kibria, M.A. & Saidur, R. & Metselaar, I.H.S.C. & Mahlia, T.M.I., 2013. "Curbing global warming with phase change materials for energy storage," Renewable and Sustainable Energy Reviews, Elsevier, vol. 18(C), pages 23-30.
    11. Zhang, Hanfei & Shin, Donghyun & Santhanagopalan, Sunand, 2019. "Microencapsulated binary carbonate salt mixture in silica shell with enhanced effective heat capacity for high temperature latent heat storage," Renewable Energy, Elsevier, vol. 134(C), pages 1156-1162.
    12. Lu, Bohui & Zhang, Yongxue & Sun, Dong & Jing, Xiaolei, 2021. "Experimental investigation on thermal properties of paraffin/expanded graphite composite material for low temperature thermal energy storage," Renewable Energy, Elsevier, vol. 178(C), pages 669-678.
    13. Ding, Zhixiong & Wu, Wei & Leung, Michael, 2021. "Advanced/hybrid thermal energy storage technology: material, cycle, system and perspective," Renewable and Sustainable Energy Reviews, Elsevier, vol. 145(C).
    14. Palomba, Valeria & Brancato, Vincenza & Frazzica, Andrea, 2017. "Experimental investigation of a latent heat storage for solar cooling applications," Applied Energy, Elsevier, vol. 199(C), pages 347-358.
    15. Alva, Guruprasad & Liu, Lingkun & Huang, Xiang & Fang, Guiyin, 2017. "Thermal energy storage materials and systems for solar energy applications," Renewable and Sustainable Energy Reviews, Elsevier, vol. 68(P1), pages 693-706.
    16. Gulfam, Raza & Zhang, Peng & Meng, Zhaonan, 2019. "Advanced thermal systems driven by paraffin-based phase change materials – A review," Applied Energy, Elsevier, vol. 238(C), pages 582-611.
    17. González-Portillo, Luis F. & Muñoz-Antón, Javier & Martínez-Val, José M., 2017. "An analytical optimization of thermal energy storage for electricity cost reduction in solar thermal electric plants," Applied Energy, Elsevier, vol. 185(P1), pages 531-546.
    18. Solé, Aran & Miró, Laia & Barreneche, Camila & Martorell, Ingrid & Cabeza, Luisa F., 2013. "Review of the T-history method to determine thermophysical properties of phase change materials (PCM)," Renewable and Sustainable Energy Reviews, Elsevier, vol. 26(C), pages 425-436.
    19. Chinnasamy, Veerakumar & Heo, Jaehyeok & Jung, Sungyong & Lee, Hoseong & Cho, Honghyun, 2023. "Shape stabilized phase change materials based on different support structures for thermal energy storage applications–A review," Energy, Elsevier, vol. 262(PB).
    20. Ge, Haoshan & Li, Haiyan & Mei, Shengfu & Liu, Jing, 2013. "Low melting point liquid metal as a new class of phase change material: An emerging frontier in energy area," Renewable and Sustainable Energy Reviews, Elsevier, vol. 21(C), pages 331-346.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:renene:v:136:y:2019:i:c:p:657-663. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.journals.elsevier.com/renewable-energy .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.