IDEAS home Printed from https://ideas.repec.org/a/eee/enepol/v37y2009i10p4104-4113.html
   My bibliography  Save this article

Energy consumption, energy savings, and emission analysis in Malaysian office buildings

Author

Listed:
  • Saidur, R.

Abstract

This paper is concerned with the estimation of energy use in office buildings in Malaysia and with the energy use of major equipment. Energy intensity (EI) - a measure of a building's energy performance - is estimated for Malaysia and compared with a number of selected countries. Air conditioners are shown to be the major energy users (57%) in office buildings, followed by lighting (19%), lifts and pumps (18%) and other equipment (6%). It is estimated that 77,569Â MWh of energy can be saved and a huge reduction of emissions achieved through the application of advance glazing, compact fluorescent lamps (CFL), insulation, housekeeping, and by raising thermostat set point temperature of air conditioners, and reducing EI. It is also estimated that a very substantial amount of energy can be saved by making use of energy-efficient motors in building systems with different motor loading percentages. Finally, it can be shown that the use of variable speed drives (VSDs) and energy-efficient motors leads to substantial energy savings and an enormous reduction in emissions.

Suggested Citation

  • Saidur, R., 2009. "Energy consumption, energy savings, and emission analysis in Malaysian office buildings," Energy Policy, Elsevier, vol. 37(10), pages 4104-4113, October.
    • Handle: RePEc:eee:enepol:v:37:y:2009:i:10:p:4104-4113
    as

    Download full text from publisher

    File URL: http://www.sciencedirect.com/science/article/pii/S0301-4215(09)00327-9
    Download Restriction: Full text for ScienceDirect subscribers only
    ---><---

    As the access to this document is restricted, you may want to search for a different version of it.

    References listed on IDEAS

    as
    1. Yang, Liu & Lam, Joseph C. & Tsang, C.L., 2008. "Energy performance of building envelopes in different climate zones in China," Applied Energy, Elsevier, vol. 85(9), pages 800-817, September.
    2. Farhanieh, B. & Sattari, S., 2006. "Simulation of energy saving in Iranian buildings using integrative modelling for insulation," Renewable Energy, Elsevier, vol. 31(4), pages 417-425.
    3. Garcia, Agenor Gomes Pinto & Szklo, Alexandre S. & Schaeffer, Roberto & McNeil, Michael A., 2007. "Energy-efficiency standards for electric motors in Brazilian industry," Energy Policy, Elsevier, vol. 35(6), pages 3424-3439, June.
    4. Mecrow, B.C. & Jack, A.G., 2008. "Efficiency trends in electric machines and drives," Energy Policy, Elsevier, vol. 36(12), pages 4336-4341, December.
    5. Jaber, J. O. & Mohsen, M. S. & Al-Sarkhi, A. & Akash, B., 2003. "Energy analysis of Jordan's commercial sector," Energy Policy, Elsevier, vol. 31(9), pages 887-894, July.
    6. Yamtraipat, N. & Khedari, J. & Hirunlabh, J. & Kunchornrat, J., 2006. "Assessment of Thailand indoor set-point impact on energy consumption and environment," Energy Policy, Elsevier, vol. 34(7), pages 765-770, May.
    7. Akbaba, Mehmet, 1999. "Energy conservation by using energy efficient electric motors," Applied Energy, Elsevier, vol. 64(1-4), pages 149-158, September.
    8. Mahlia, T.M.I, 2002. "Emissions from electricity generation in Malaysia," Renewable Energy, Elsevier, vol. 27(2), pages 293-300.
    9. Chow, Larry Chuen-ho, 2001. "A study of sectoral energy consumption in Hong Kong (1984-97) with special emphasis on the household sector," Energy Policy, Elsevier, vol. 29(13), pages 1099-1110, November.
    Full references (including those not matched with items on IDEAS)

    Most related items

    These are the items that most often cite the same works as this one and are cited by the same works as this one.
    1. Saidur, R. & Rahim, N.A. & Ping, H.W. & Jahirul, M.I. & Mekhilef, S. & Masjuki, H.H., 2009. "Energy and emission analysis for industrial motors in Malaysia," Energy Policy, Elsevier, vol. 37(9), pages 3650-3658, September.
    2. Saidur, R. & Mahlia, T.M.I., 2010. "Energy, economic and environmental benefits of using high-efficiency motors to replace standard motors for the Malaysian industries," Energy Policy, Elsevier, vol. 38(8), pages 4617-4625, August.
    3. Saidur, R. & Rahim, N.A. & Hasanuzzaman, M., 2010. "A review on compressed-air energy use and energy savings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(4), pages 1135-1153, May.
    4. Saidur, R. & Hasanuzzaman, M. & Yogeswaran, S. & Mohammed, H.A. & Hossain, M.S., 2010. "An end-use energy analysis in a Malaysian public hospital," Energy, Elsevier, vol. 35(12), pages 4780-4785.
    5. Thirugnanasambandam, M. & Hasanuzzaman, M. & Saidur, R. & Ali, M.B. & Rajakarunakaran, S. & Devaraj, D. & Rahim, N.A., 2011. "Analysis of electrical motors load factors and energy savings in an Indian cement industry," Energy, Elsevier, vol. 36(7), pages 4307-4314.
    6. Saidur, R., 2010. "A review on electrical motors energy use and energy savings," Renewable and Sustainable Energy Reviews, Elsevier, vol. 14(3), pages 877-898, April.
    7. Hasanuzzaman, M. & Rahim, N.A. & Saidur, R. & Kazi, S.N., 2011. "Energy savings and emissions reductions for rewinding and replacement of industrial motor," Energy, Elsevier, vol. 36(1), pages 233-240.
    8. Iwaro, Joseph & Mwasha, Abraham, 2010. "A review of building energy regulation and policy for energy conservation in developing countries," Energy Policy, Elsevier, vol. 38(12), pages 7744-7755, December.
    9. Burgos Payán, Manuel & Roldan Fernandez, Juan Manuel & Maza Ortega, Jose Maria & Riquelme Santos, Jesus Manuel, 2019. "Techno-economic optimal power rating of induction motors," Applied Energy, Elsevier, vol. 240(C), pages 1031-1048.
    10. Bortoni, Edson C. & Magalhães, Leonardo P. & Nogueira, Luiz A.H. & Bajay, Sérgio V. & Cassula, Agnelo M., 2020. "An assessment of energy efficient motors application by scenarios evaluation," Energy Policy, Elsevier, vol. 140(C).
    11. Hosain, Md Lokman & Bel Fdhila, Rebei & Rönnberg, Kristian, 2017. "Taylor-Couette flow and transient heat transfer inside the annulus air-gap of rotating electrical machines," Applied Energy, Elsevier, vol. 207(C), pages 624-633.
    12. Iwaro, Joseph & Mwasha, Abrahams & Williams, Rupert G. & Zico, Ricardo, 2014. "An Integrated Criteria Weighting Framework for the sustainable performance assessment and design of building envelope," Renewable and Sustainable Energy Reviews, Elsevier, vol. 29(C), pages 417-434.
    13. R Saidur & MA Sattar & H.H. Masjuki & M.Y. Jamaluddin, 2009. "Greenhouse Gas Emissions from Refrigeration Equipment in Malaysia," Energy & Environment, , vol. 20(4), pages 533-551, August.
    14. Abdelaziz, E.A. & Saidur, R. & Mekhilef, S., 2011. "A review on energy saving strategies in industrial sector," Renewable and Sustainable Energy Reviews, Elsevier, vol. 15(1), pages 150-168, January.
    15. Saidur, R. & Rahim, N.A. & Masjuki, H.H. & Mekhilef, S. & Ping, H.W. & Jamaluddin, M.F., 2009. "End-use energy analysis in the Malaysian industrial sector," Energy, Elsevier, vol. 34(2), pages 153-158.
    16. Sola, Antonio Vanderley Herrero & Mota, Caroline Maria de Miranda & Kovaleski, João Luiz, 2011. "A model for improving energy efficiency in industrial motor system using multicriteria analysis," Energy Policy, Elsevier, vol. 39(6), pages 3645-3654, June.
    17. Saidur, R. & Masjuki, H.H. & Jamaluddin, M.Y. & Ahmed, S., 2007. "Energy and associated greenhouse gas emissions from household appliances in Malaysia," Energy Policy, Elsevier, vol. 35(3), pages 1648-1657, March.
    18. Wong, L.T. & Mui, K.W., 2009. "Efficiency assessment of indoor environmental policy for air-conditioned offices in Hong Kong," Applied Energy, Elsevier, vol. 86(10), pages 1933-1938, October.
    19. Singh, Gurmeet & Anil Kumar, T.Ch. & Naikan, V.N.A., 2019. "Efficiency monitoring as a strategy for cost effective maintenance of induction motors for minimizing carbon emission and energy consumption," Reliability Engineering and System Safety, Elsevier, vol. 184(C), pages 193-201.
    20. Habib, Mohammad Ahsan & Hasanuzzaman, M. & Hosenuzzaman, M. & Salman, Asif & Mehadi, Md Riyad, 2016. "Energy consumption, energy saving and emission reduction of a garment industrial building in Bangladesh," Energy, Elsevier, vol. 112(C), pages 91-100.

    Corrections

    All material on this site has been provided by the respective publishers and authors. You can help correct errors and omissions. When requesting a correction, please mention this item's handle: RePEc:eee:enepol:v:37:y:2009:i:10:p:4104-4113. See general information about how to correct material in RePEc.

    If you have authored this item and are not yet registered with RePEc, we encourage you to do it here. This allows to link your profile to this item. It also allows you to accept potential citations to this item that we are uncertain about.

    If CitEc recognized a bibliographic reference but did not link an item in RePEc to it, you can help with this form .

    If you know of missing items citing this one, you can help us creating those links by adding the relevant references in the same way as above, for each refering item. If you are a registered author of this item, you may also want to check the "citations" tab in your RePEc Author Service profile, as there may be some citations waiting for confirmation.

    For technical questions regarding this item, or to correct its authors, title, abstract, bibliographic or download information, contact: Catherine Liu (email available below). General contact details of provider: http://www.elsevier.com/locate/enpol .

    Please note that corrections may take a couple of weeks to filter through the various RePEc services.

    IDEAS is a RePEc service. RePEc uses bibliographic data supplied by the respective publishers.